CT05-1535-G1

COTO CLASSIC™ CT05 SERIES MOLDED REED SWITCH 1 Description 2 Features The CT05 is an overmolded dry reed switch. It is single-pole, single throw (SPST) type, having normally open ruthenium contacts. u The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The device is designed for SMD mounting and is available in Gull Wing or J-bend lead configurations. Ideal for SMD pick and place Tape and reel packaging u 5W rating u Rugged encapsulation u Excellent life and reliability u UL File 67117 u RoHS compliant u 3 Applications Device Information Proximity Sensing Medical Applications u Hearing Aids u Pulse Counter u u Part Series Package Body Size (mm) CT05 Molded SMD 9.55 x 2.31 x 2.31 (Gull Wing) 7.57 x 2.31 x 2.31 (J-Bend) Device Packages 4 Ordering Information A complete part number is represented by the digits to the right of the CT05 series prefix followed by a suffix as shown below. EXAMPLE: CT05-3050-G1 is a CT05 sensor (5mm encapsulated switch) with a sensitivity range from 30 to 50AT lead ends are formed according to the G1 version CT05-XXXX (0001-1999) without a suffix is a customer special. CT05-XXXX-YY Lead Configuration Subset: Series G1 for Gull Wing Version CT05 J1 for J-Lead Version AT Ranges (measured after mold & lead form) 15-35; 25-50; 30-50 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Copyright 2022. All rights reserved. | rev.04052022 | page 1 COTO CLASSIC™ CT05 SERIES MOLDED REED SWITCH 5 Specifications for CT05 5.1 Operating / Environmental Ratings for CT05-XXXX-YY Parameters Units Min Typ Max Operating Range AT 15 50 Release Range AT 5 49 Storage Temperature ºC -40 125 Operating Temperature ºC -40 125 Vibration Resistance G 10 Shock Resistance G 100 Notes: 1. AT values measured using a Philips 10JK coil. 4AT ~ 1mT = 10G (Applicable only for Coto Technology AT values.) 2. Surface mount component processing temperature: 500°F(260°C). See Section 8 for Profile Recommendations. 3. Temperature measured on leads where lead exits molded package. 5.2 Electrical Characteristics for CT05-XXXX-YY Parameters Units Typ Min Max Switched Power W 5 Switched Voltage DC V 140 Switched Voltage AC, RMS value V 100 Switched Current DC mA 350 Switched Current AC, RMS value mA 250 Carry Current DC mA 500 Breakdown Voltage V 230 Life Expectancy @ 1V, 10mA 106 hours 500 Life Expectancy @ 10V, 10mA 106 hours 100 Contact Resistance mW 160 Insulation Resistance MW 104 Dielectric Strength VDC 230 5.3 Operating Characteristics for CT05-XXXX-YY Part Number Parameters Units Min CT05-1535-YY Operating Range Release Range AT AT 15 5 35 34 CT05-2550-YY Operating Range Release Range AT AT 25 5 50 49 CT05-3050-YY Operating Range Release Range AT AT 30 5 50 49 page 2 | Copyright 2022. All rights reserved. | rev.04052022 Typ (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Max COTO CLASSIC™ CT05 SERIES MOLDED REED SWITCH 6 Device Package Details Inches (Millimeters) 6.1 CT05-XXXX-G1 6.2 CT05-XXXX-J1 .252 (6.40) .252 (6.40) (SIDE VIEW) .039 (1.00) .184 (4.67) .003 (0.08) LEADS BELOW PACKAGE .376 (9.55) (BOTTOM VIEW) (SIDE VIEW) .091 (2.31) .003 (0.08) LEADS BELOW PACKAGE .184 (4.67) .242 (6.15) .298 (7.57) (BOTTOM VIEW) .091 (2.31) .091 (2.31) .091 (2.31) .045 (1.14) .045 (1.14) (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Copyright 2022. All rights reserved. | rev.04052022 | page 3 COTO CLASSIC™ CT05 SERIES MOLDED REED SWITCH 7 CT05 Reel & Carrier Tape Packaging 7.1 CT05 Carrier Tape .157 [4.00] [±0.10] SEE NOTE 1 .079 [2.00] [±0.10] (.090 [2.29]) [ ] +0.10 Ø.059 +.004 –.000 1.50 –0.00 Ø.059 ± .004 [1.50 ± 0.10] A .395 [10.03] .453 ± .004 [11.50±0.10] B B .260 [6.60] .945 ± .012 [24.00±0.30] .124 [3.15] .013 [0.33] ± 10% SECTION A-A SCALE 3 .315 [8.00] A .111 [2.82] .040 [1.02] .090 [2.29] .100 [2.54] .105 [2.67] Notes: 1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm. 2. Camber in compliance with EIA 481. 3. Pocket position relative to sprocket hole measured as a true position of pocket, not pocket hole. .045 [1.14] SECTION B-B SCALE 3 7.2 CT05-XXXX-G1 and CT05-XXXX-J1 Reel 13.0 Ref. [330] 4.0” CT05 Packaging Box Dimensions - 14x14x6 inches Fits 1 to 3 reels = 2000 to 6000 pcs Weight for 2000 pcs: 1.20 kilos Weight for 6000 pcs: 2.90 kilos 0.512 [13] +.012 .330 –.008 [8.4 +.3* –.2 ] .437* [11.1] Notes: * Measured at Hub Advantek #RD33008 SW Antistatic page 4 | Copyright 2022. All rights reserved. | rev.04052022 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com COTO CLASSIC™ CT05 SERIES MOLDED REED SWITCH 8 Recommended Reflow Profile SAC Alloy 300 Peak Temperature Temperature (C) 250 235-260∞C (20 sec max) 200 Reflow zone Time above 217∞C (60 - 90 sec) 150 100