CT10-1040-A2

CT10 SERIES ENCAPSULATED MOLDED SWITCH NEW! CT10 -G2 CT10 Series The CT10 is an encapsulated molded dry reed switch. It is single-pole, single throw (SPST) type, having normally open ruthenium contacts. The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The device is designed for SMD mounting and is available in three lead configurations. * NEW CT10-G2 now 260 ºC process temperature hardy. CT10 Series Features u Ideal for SMD pick and place u Tape and reel packaging u 10W rating u Rugged encapsulation u Excellent life and reliability u RoHS compliant MODEL NUMBER Parameters OPERATING CHARACTERISTICS APPLICATIONS u Proximity Sensing u Security Alarm Sensor u Level Sensor u Flow Sensor u Pulse Counter CT10-XXXX-YY Units Operate Range AT 10-40 Release Range AT 3-35 ELECTRICAL CHARACTERISTICS Switched Power (max) W 10 Switched Voltage DC (max) V 200 Switched Voltage AC, RMS value (max) V 140 Switched Current DC (max) mA 500 Switched Current AC, RMS value (max) mA 500 Carry Current DC (max) A 0.5 Breakdown Voltage (min) V 230 Contact Resistance (initial max) mΩ 200 Insulation Resistance (min) MΩ 106 Storage Temperature ºC -40 to + 125 Operating Temperature ºC -40 to + 125 Vibration Resistance G 10 Shock Resistance G 100 ENVIRONMENTAL RATINGS NOTES AT values measured using a Philips 10JK coil. Surface mount component processing temperature Model G1 & G2: 500°F(260°C) max for 1 minute dwell time; Model G4 & A2: 439°F(226°C) max for 1 minute dwell time. u Temperature measured on leads where lead exits molded package. u u 06242015 tel: (401) 943.2686 | fax: (401) 942.0920 DIMENSIONS in Inches (Millimeters) CT10-XXXX-G1 CT10-XXXX-G2 .635/.645 (16.13/16.38mm) .458 (11.6mm) Max. .765/.775 (19.43/19.68mm) .115 (2.92mm) Max. .115 (2.92mm) Max. .025 (.63mm) Max. .010±.002 .458 (11.63mm) Max. 0.012±0.003 STRESS RELIEF .040 (1.02mm) Max. .040 (1.02mm) Max. .025 (.63mm) .035/.045 (.89/1.14mm) .035/.045 (.89/1.14mm) .095 (2.41mm) Max. .030 (.76mm) Max. .030 (.76mm) Max. .095 (2.41mm) Max. CT10-XXXX-G4 CT10-XXXX-A2 .765-.775 (19.4-19.7mm) .505 (12.8mm) 105º Ref. .010 (0.25mm) .045 (1.1mm) intersection .035 (0.9) .015 (0.38mm) .505 (12.8mm) (SIDE VIEW) .005±.005 (0.127±0.127mm) Below Stando Surface .095 (2.41mm) .057 (1.45mm) .609/.619 (15.47/15.72mm) .250 (6.35mm) Ø.040 (1.02mm) (BOTTOM VIEW) .045 (1.14mm) Max. .095 (2.4mm) .040 (1.01mm) .045 (1.14mm) .045 (1.14mm) .095 (2.41mm) Max. ORDERING INFORMATION CT10-XXXX-YY A complete part number is represented by the digits to the right of the CT10 series prefix followed by a suffix as shown below. Series CT10 EXAMPLE: CT10-1030-G1 is a CT10 sensor (10mm encapsulated switch) with a sensitivity range from 10 to 30AT lead ends are formed according to the G1 version For most recent data visit www.cotorelay.com Lead Configuration Subset: G1 for Gull Wing Version 1 (16.4mm) G2/G4 for Gull Wing Version 2 (19.6mm) A2 for Axial AT Range (measured after mold & lead form) 10-30; 10-40 06242015 COTO TECHNOLOGY, INC.