CT10-2540-G1

COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 1 Description 2 Features The CT10 is an overmolded dry reed switch. It is single-pole, single throw (SPST) type, having normally open ruthenium contacts. u The sensor is a double-ended type and may be actuated with an electromagnet, a permanent magnet or a combination of both. The device is designed for SMD mounting and is available in three lead configurations. Ideal for SMD pick and place Tape and reel packaging u 10W rating u Rugged encapsulation u Excellent life and reliability u UL File 67117 u RoHS compliant u 3 Applications Proximity Sensing Security Alarm Sensor u Level Sensor u Flow Sensor u Pulse Counter Device Information u u Part Series Package Body Size (mm) CT10 Molded SMD 15.72 x 2.41 x 2.4 (A2) 16.38 x 2.92 x 2.41 (G1) 19.68 x 2.92 x 2.41 (G2) 19.7 x 2.92 x 2.41 (G4) Device Packages 4 Ordering Information A complete part number is represented by the digits to the right of the CT10 series prefix followed by a suffix as shown below. EXAMPLE: CT10-1030-G1 is a CT10 sensor (10mm encapsulated switch) with a sensitivity range from 10 to 30AT lead ends are formed according to the G1 version CT10-XXXX-YY Series CT10 Lead Configuration Subset: A2 for Axial G1 for Gull Wing Version 1 (16.4mm) G2/G4 for Gull Wing Version 2 (19.6mm) AT Range (measured after mold & lead form) 10-20; 10-25; 10-30; 10-40; 15-30; 15-40; 20-30; 20-35; 25-35; 25-40 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Copyright 2022. All rights reserved. | rev.04052022 | page 1 COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 5 Specifications for CT10 5.1 Operating / Environmental Ratings for CT10-XXXX-YY Parameters Units Min Operating Range AT 10 40 Release Range AT 3 39 Storage Temperature ºC -40 125 Operating Temperature ºC -40 125 Vibration Resistance G 10 Shock Resistance G 100 Type Max Notes: 1. AT values measured using a Philips 10JK coil. 2. Surface mount component processing temperature Model G1 & G2: 500°F(260°C) max peak; Model G4 & A2: 439°F(226°C) max peak. See Section 8 for Profile Recommendations. 3. Temperature measured on leads where lead exits molded package. 5.2 Electrical Characteristics for CT10-XXXX-YY Parameters Units Min Typ Max Switched Power W 10 Switched Voltage DC V 200 Switched Voltage AC, RMS value V 140 Switched Current DC mA 500 Switched Current AC, RMS value mA 500 Carry Current DC mA 500 Breakdown Voltage V 230 Life Expectancy @ 1V, 10mA 10 hours 1000 Life Expectancy @ 10V, 10mA 106 hours 500 6 Contact Resistance mW Insulation Resistance MW 106 Dielectric Strength VDC 230 page 2 | Copyright 2022. All rights reserved. | rev.04052022 200 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 5 Specifications for CT10 5.3 Operating Characteristics for CT10-XXXX-YY Part Number Parameters Units Min CT10-1020-YY Operating Range Release Range AT AT 10 3 20 19 CT10-1025-YY Operating Range Release Range AT AT 10 3 25 24 CT10-1030-YY Operating Range Release Range AT AT 10 3 30 29 CT10-1040-YY Operating Range Release Range AT AT 10 3 40 39 CT10-1530-YY Operating Range Release Range AT AT 15 3 30 29 CT10-1540-YY Operating Range Release Range AT AT 15 3 40 39 CT10-2030-YY Operating Range Release Range AT AT 20 3 30 29 CT10-2035-YY Operating Range Release Range AT AT 20 3 35 34 CT10-2535-YY Operating Range Release Range AT AT 25 3 35 34 CT10-2540-YY Operating Range Release Range AT AT 25 3 40 39 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Typ Max Copyright 2022. All rights reserved. | rev.04052022 | page 3 COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 6 Dimensions Inches (Millimeters) 6.1 CT10-XXXX-G1 6.2 CT10-XXXX-G2 .635-.645 (16.13-16.38) .458 (11.63) Max. .765-.775 (19.43-19.68) 0.001(0.03) Max. STRESS RELIEF MARK .458 (11.6) Max. (SIDE VIEW) .115 (2.92) Max. .115 (2.92) Max. .0264 (.64) Max. .008-.012 (.20-.30) (SIDE VIEW) .040 (1.02) Max. .025 (.63) .040 (1.02) Max. .035-.045 (.89-1.14) .035-.045 (.89-1.14) (BOTTOM VIEW) .095 (2.41) Max. (BOTTOM VIEW) .030 (.76) Max. .030 (.76) Max. 6.3 CT10-XXXX-G4 .095 (2.41) Max. 6.4 CT10-XXXX-A2 .505 (12.8) .765-.775 (19.4-19.6) .505 (12.8) (SIDE VIEW) (SIDE VIEW) .010 (0.25) .045 (1.1) intersection .035 (0.9) .015 (0.38) .095 (2.41) .057 (1.45) .005±.005 (0.127±0.127) Below Standoff Surface .609- .619 (15.47- 15.72) .250 (6.3) Ø.040 (1.02) (BOTTOM VIEW) 0.095 (2.4) .045 (1.14) Max. .045 (1.14) .040 (1.01) .045 (1.14) .095 (2.41) Max. page 4 | Copyright 2022. All rights reserved. | rev.04052022 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com .095 (2.4) COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 7 CT10 Reel & Carrier Tape Packaging 7.1 CT10-XXXX-G1 and CT10-XXXX-A2 Carrier Tape .06295 [16] .157 [4] Direction of Feed [ .059 1.5 +.004 –.000 .078 [2] ] B 1.259 [32] .365 [9.275] .315 [8.0] Pitch Ø.079 .665 [16.89] .105 [2.677] .130 [3.3] .100 [2.54] Notes: 1. All tape and sprocket hole dimensions are per EIA-481 unless noted. 2. All pocket dimensions are ± .005”. 7.2 CT10-XXXX-G2 and CT10-XXXX-G4 Carrier Tape 0.59 +.004 –.000 0.799 [20.3] .340 .314 [8] 1.26 [32] .340 .779 Ø.079 Notes: 1. All tape and sprocket hole dimensions are per EIA-481 unless noted. 2. All pocket dimensions are ± 0.010. .095 .123 (401) 943-2686 | classic@cotorelay.com | www.cotorelay.com Copyright 2022. All rights reserved. | rev.04052022 | page 5 COTO CLASSIC™ CT10 SERIES MOLDED REED SWITCH 7 CT10 Reel & Carrier Tape Packaging 7.3 CT10 Reel Packaging 13.0” Ref. [330] CT10 Packaging Box Dimensions - 14x14x6 inches Fits 1 to 3 reels = 2000 to 6000 pcs Weight for 2000 pcs: 1.20 kilos Weight for 6000 pcs: 2.90 kilos 4.0” 0.512 [13] +.012 16.4 +.3* ] .646 –.008 [ –.2 .752* [19.1] Notes: * Measured at Hub Advantek #RD33016 SW Antistatic 8 Recommended Reflow Profile SAC Alloy 300 Peak Temperature Temperature (C) 250 G1, G2 = 260º Peak G4, A2 = 226º Peak (20 sec max) 200 Reflow zone Time above 217∞C (60 - 90 sec) 150 100