3CX1200A7

cpi | 3 cx1200a7 cpi | 4cW50,000J 3cx1200a7 The 3CX1200A7 is a high-mu, forced air cooled, rugged power triode intended for use as a zero bias Class AB2 RF amplifier to 110 MHz. chaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 1,200 Watts --50 Watts 110 MHz 200 Thoriated Tungsten 7.5 Volts 21.0 Amps Grounded Cathode 20.0 pf 0.2 pf 12 pf ----- pf --- pf --- pf Forced Air 5 Pin Special SK-410 SK-436 --6.0 in; 147.0 mm 2.91 in; 73.1 mm 2.5 lb ; 1.1 kg type of service RF linear amplifier MaxiMuM Ratings plate Voltage (Volts) 5,000 plate current (amps) 0.8 ypical OpeRatiOn t plate current (amps) 0.7 Drive Output power power (Watts) (kiloWatts) 85 1.5 class of Operation aB plate screen Voltage Voltage (Volts) (Volts) 3,600 --- The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com