3CX800A7

cpi || 3CX800A7 cpi 4cW50,000J 3cx800a7 The 3CX800A7 is a compact high-mu power triode intended for use in zero bias class B amplifiers in audio or radio frequency applications. It may also be useful as a pulse modulator or regulator. A single 3CX800A7 will deliver 750 watts PEP and 750 watts keydown CW output to 350 MHz. Linearity and power gain are excellent due to the beam forming geometry of the special grid and cathode design. chaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 800 Watts N/A 4 Watts 350 MHz 200 Oxide Coated 13.5 Volts 1.5 Amps Grounded Grid 26.0 pf 6.1 pf .05 pf N/A N/A N/A N/A Forced Air 11 Pin SK-1900 SK-1906 N/A 2.52 in; 64.01 mm 2.53 in; 64.26 mm 11.5 oz; 326 gm M axiMuM Ratings class of Operation aB2 --type of service plate Voltage (Volts) 2,250 3,500 plate current (amps) 0.6 8.0 plate Voltage (Volts) 2,200 --- typical OpeRatiOn screen Voltage (Volts) ----plate current (amps) 0.5 --Drive Output power power (Watts) (kiloWatts) 23 --0.750 --- cathode Driven RF linear amplifier pulse Modulator or Regulator The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI MPP products, visit our website at: w ww.cpii.com, or contact: CPI Microwave Products Division, Eimac Operation,607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com