4CPW100KA

cpi | 4 cpW100Ka/ y-841 cpi | 4cW50,000J 4cpW100Ka/y-841 The 4CPW100KA/Y-841 is a ceramic/metal, water cooled, high power tetrode intended for use as a pulse modulator or in regulator service. Its rugged mesh thoriated-tungsten filament provides ample emission for 100 amp peak current rating. The 4CPW100KA/Y-841 is rated at 110 kilovolts in a protective atmosphere or with oil immersion between the anode and screen grid terminal. The water-cooled anode is rated for a maximum dissipation of 100 kilowatts. Available accessories are a tube support plate, an air system socket, and containment hood for protective atmosphere. chaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 100,000 Watts 1,750 Watts 500 Watts --- MHz 4.5 Thoriated Tungsten 15.5 Volts 215 Amps Grounded Cathode 470 pf 40 pf 0.5 pf ----- pf --- pf --- pf Water and Forced Air Special Coaxial ------18.1 in; 45.9 cm 13.9 in; 35.3 cm 50 lb; 22.7 kg type of service pulse modulator MaxiMuM Ratings plate Voltage (Volts) 110,000 plate current (amps) 100 ypical OpeRatiOn t plate current (amps) 1500 Drive Output power power (Watts) (kiloWatts) --- 4.35 class of Operation plate screen Voltage Voltage (Volts) (Volts) 90,000 50 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com