4CW100-000E

cpi | 4 cW100,000e cpi | 4cW50,000J 4cW100,000e The 4CW100,000E is ideal for use as a Class C RF amplifier or oscillator, a Class AB RF linear amplifier, or a Class AB push-pull AF amplifier or modulator as well as a plate and screen-modulated Class C RF amplifier. In a pulse modulator service, it can deliver a peak output of 4 megawatts. The tube is characterized by low input and feedback capacitances and low internal lead inductances. chaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 100,000 Watts 1,750 Watts 500 Watts 108 MHz --Thoriated Tungsten 15.5 Volts 215 Amps Grounded Cathode 370 pf 60.0 pf 1.0 pf Grounded Grid 175 pf 60.0 pf 0.35 pf Water and Forced Air Special Coaxial SK-2011A ----12.82 in; 325.60 mm 9.53 in; 242.10 mm 38.5 lb; 17.5 kg type of service RF amplifier RF amplifier plate modulated RF linear amplifier MaxiMuM Ratings plate Voltage (Volts) 20,000 17,500 20,000 20,000 plate current (amps) 16.0 16.0 16.0 16.0 ypical OpeRatiOn t plate current (amps) 15.2 11.7 13.5 19.5 Drive Output power power (Watts) (kiloWatts) 120 530 --- --- 220.0 140.0 168.0 200.0 class of Operation c c aB1 aB1 plate screen Voltage Voltage (Volts) (Volts) 20,000 15,000 18,000 15,000 1,500 750 1,500 1,500 aF amplifier or modulator (2 tubes) The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operations, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com