4CX3000A

cpi | 4 cx3000a/ 8169 cpi | 4cW50,000J 4cx3000a/8169 The 4CX3000A/8169 is designed to be used as a Class AB1 linear amplifier in audio or radio frequency applications. Its characteristic of low intermodulation distortion makes it especially suitable for single sideband service. This tube is unique in that a production test is included to insure minimum distortion products. The 4 CX3000A/8169 must produce a minimum of 5300 watts in Class AB1 service with 3rd order IM distortion at least 32 dB down, from one tone of t wo-tone signal. The tube is also recommended for use as a Class C radio frequency power amplifier and plate-modulated, radio frequency power amplifier. cHaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 3,500 Watts 175 Watts 50 Watts 150 MHz 5.5 Thoriated Tungsten 9.0 Volts 41.5 Amps Grounded Cathode -130 pf 12.5 pf 1.0 pf Grounded Grid 61.0 pf 12.5 pf 0.1 pf Forced Air Special, Breechblock SK-1400 SK-1406 --7.90 in; 200.70 mm 4.63 in; 117.60 mm 5.5 lb; 2.5 kg type of service RF amplifier at 30 MHz MaxiMuM Ratings plate Voltage (Volts) 7,000 5,000 7,000 6,000 plate current (amps) 2.0 1.4 2.0 2.0 ypical OpeRatiOn t plate current (amps) 1.9 1.4 1.7 3.1 Drive Output power power (Watts) (kiloWatts) 41 31 --- --- 11.00 5.75 5.3 12.4 class of Operation c c aB aB plate screen Voltage Voltage (Volts) (Volts) 7,000 5,000 5,000 6,000 500 500 850 850 aF amplifier plate modulated at 30 MHz RF linear amplifier aF amplifier or modulator The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com