8560AS

cpi | 8 560as cpi | 4cW50,000J 8560as The 8560AS is intended for use as an RF amplifier or oscillator or in audio amplifier or modulation service. It has electrical characteristics similar but not identical to the 4CX250B/7203. The 8 560AS is designed for conduction cooling and is nominally rated for 200 watts anode dissipation. chaRacteRistics Plate Dissipation (Max.) Screen Dissipation (Max.) Grid Dissipation (Max.) Frequency for Max. rating (CW) Amplification Factor Filament/Cathode Voltage Current Capacitance Input Output Feedthrough Capacitance Input Output Feedthrough Cooling Base Air Socket Air Chimney Boiler Length Diameter Weight 200 Watts 12 Watts 2 Watts 500 MHz 5 Oxide Coated 6.3 Volts 2.6 Amps Grounded Cathode 16.5 pf 4.6 pf .04 pf ----- pf --- pf --- pf Conduction 9 Pin Special n/a ----2.45 in; 62.1 mm 1.63 in; 41.4 mm 8.2 oz; 235 gm type of service RF amplifier RF amplifier plate modulated RF linear amplifier RF amplifier or modulator MaxiMuM Ratings plate Voltage (Volts) 2,000 1,500 2,000 2,000 plate current (amps) 0.25 0.20 0.25 0.25 ypical OpeRatiOn t plate current (amps) 0.25 0.20 0.25 0.50 Drive Output power power (Watts) (kiloWatts) 2.9 1.7 --- --- 0.390 0.235 0.300 0.600 class of Operation c c aB1 aB1 plate screen Voltage Voltage (Volts) (Volts) 2,000 1,500 2,000 2,000 250 250 350 350 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, Eimac Operation, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1 (800) 414-8823. fax : ( 650) 592-9988 | email : powergrid@cpii.com