T04CO

400W Outdoor TWT Amplifier for Satellite Communications C - Band The T04CO Series 400 Watt TWT Amplifier — high efficiency in an environmentally sealed compact package designed for outdoor operation C - Band P lays in the Rain Easy to Maintain 400W Outdoor TWT Amplif ier Provides 400 watts of power in a rugged and compact weatherproof package, digital ready, for wideband, single- and multi-carrier satellite service in the 5.85 - 6.65 GHz frequency band. Ideal for transportable and fixed earth station applications. Cost Effective and Efficient Modular design and built-in fault diagnostic capability via remote monitor and control. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Worldwide Support Mounting at the antenna improves performance through minimized cable losses and saves cost in system design. Employs a high efficiency, dualdepressed collector helix traveling wave tube reducing operating costs. Reliable Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes sixteen regional factory Service Centers. Designed and built to survive in extremely adverse environmental conditions and features increased cooling margin for longer life. Simple to Operate 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: + 1 (650) 846-3803 f ax: + 1 (650) 424-1744 e-mail: m arketing@satcom.cpii.com www.cpii.com/satcom User-friendly microprocessor-controlled logic with integrated RS422/485 computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. C-B a n d SPECIFICATIONS, T04CO Series Electrical Electrical (continued) 5.85 - 6.65 GHz 400 W min. (56.02 dBm) 350 W min. (55.44 dBm) 800 MHz 46 dB min. at rated power output (70 dB with SSIPA) 52 dB min. at small signal (75 dB with SSIPA) ±0.25 dB/24hr max. (after 30 min. warmup) ±1.0 dB over operating temp. range; (±1.75 dB above 6.725 GHz for 7.1 GHz ext. frequency option); ±0.75 dB over ±10°C ±0.02 dB/MHz max. (±0.04 dB/MHz max. with BUC option) 0.5 dB pk-pk across any 40 MHz band; 2.5 dB pk-pk across the 800 MHz band; 4.0 dB pk-pk across the 1250 MHz band; 4.5 dB pk-pk across any 500 MHz, with BUC option 0 to 30 dB typ. (SSIPA option required) 0.1 dB (SSIPA option required) 1.3:1 max. (1.5:1 max. with BUC option) 1.3:1 max. 2.0:1 max. continuous operation; any value for operation without damage -50 dBc below 10 kHz -20[1.5 +log F (kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz Acoustic Noise Heat Dissipation Shock and Vibration Group Delay (in any 40 MHz band) Primary Power Power Consumption Power Factor Inrush Current Intermodulation -24 dBc max. with two equal carriers at total output power 7 dB (4 dB with optional integral linearizer) below rated single-carrier output; -23 dBc above 6.725 GHz, 7.10 GHz extended freq. option 0.01 ns/MHz linear max. 0.001 ns/MHz 2 parabolic max. 0.5 ns pk-pk ripple max. 90-264 volts AC, single phase 47-63 Hz 1350 W typ. 1500 W max. 0.95 min. 200% max. OPTIONS: • 1 RU Remote Control Panel • Integrated 1:1 Switch Control and Drive • Redundant and Power Combined Subsystems • SSIPA with Variable Attenuator (provides RF Level Adjust Range of 0 to 30 dB) • Integral Linearizer (Requires SSIPA option) • Extended Frequency Range (to 7.10 GHz) • Additional External Receive Band Reject Filter (increases loss by a minimum 65 dB up to 4.8 GHz) • L-Band Block Upconverter (BUC --- requires SSIPA) • Ethernet Interface • Higher Operating Temperature Limit (+60°) • Circuit Breaker Package (NOTE: This option is NOT CE Compliant) Frequency Output Power TWT Flange Bandwidth Gain Gain Stability At constant drive and temp Any frequency Small Signal Gain Slope Small Signal Gain Variation Environmental (Operating) Ambient Temperature -40°C to +55°C operating, including solar loading; -40°C to +75°C non-operating 100% condensing 10,000 ft. (3,048 m) with standard adiabatic derating of 2°C/1000 ft. (305 m), operating; 50,000 ft. (15,240 m), non-operating Designed for normal transportation environment per Section 514.4 MIL-STD-810E. Designed to withstand 20g at 11 ms (1/2 sine pulse) in non-operating configuration. 65 dBA @ 3 ft. from amplifier 1100 W max. Relative Humidity Altitude RF Level Adjust Range Attenuator Step Size Input VSWR Output VSWR Load VSWR Residual AM Phase Noise IESS-308/309 12 dB below mask (3 dB with BUC option) phase noise continuous AC fundamentals related -50 dBc (-33 dBc with BUC option) Sum of spurs (370 Hz to 1 MHz) -47 dBc (-39 dBc with BUC option) AM/PM Conversion 2.5°/dB max. for a single carrier at 7 dB below rated power (2.5°/dB max. at 3 dB below rated with linearizer) -60 dBc at rated power