T04XO

400W Outdoor TWT Amplifier for Satellite Communications X- Band The T04XO Series 400 Watt TWT Amplifier — high efficiency in an environmentally sealed compact package designed for outdoor operation X- Band 400W Outdoor TWT Amplif ier P lays in the Rain Easy to Maintain Provides 400 watts of power in a rugged and compact weatherproof package, digital ready, for wideband, single- and multi-carrier satellite service in the 7.9 - 8.4 GHz frequency band. Ideal for transportable and fixed earth station applications. Cost Effective and Efficient Modular design and built-in fault diagnostic capability via remote monitor and control. Global Applications Meets International Safety Standard EN-60215, Electromagnetic Compatibility 2004/108/EC and Harmonic Standard EN-61000-3-2 to satisfy worldwide requirements. Worldwide Support Mounting at the antenna improves performance through minimized cable losses and saves cost in system design. Employs a high efficiency, dualdepressed collector helix traveling wave tube reducing operating costs. Reliable Backed by over three decades of satellite communications experience, and CPI’s worldwide 24-hour customer support network that includes sixteen regional factory service centers. Designed and built to survive in extremely adverse environmental conditions and features increased cooling margin for longer life. Simple to Operate 811 Hansen Way P.O. Box 51625, Palo Alto, CA 94303 tel: + 1 (650) 846-3803 f ax: + 1 (650) 424-1744 e-mail: m arketing@satcom.cpii.com www.cpii.com/satcom User-friendly microprocessor-controlled logic with integrated RS422/485 computer interface. Digital metering, pin diode attenuation and optional integrated linearizer for improved intermodulation performance. X -B a n d SPECIFICATIONS, T04XO Series Electrical Frequency Output Power TWT Flange 7.9 - 8.4 GHz 400 W min. (56.02 dBm) 350 W min. (55.44 dBm) 500 MHz 46 dB min. at rated power output (70 dB with SSIPA) 52 dB min. at small signal (75 dB with SSIPA) Power Consumption Power Factor Electrical (continued) Group Delay (in any 40 MHz band) Primary Power 0.01 ns/MHz linear max. 0.001 ns/MHz 2 parabolic max. 0.5 ns pk-pk ripple max. 90-264 volts AC, single phase 47-63 Hz 1350 W typ. 1500 W max. 0.95 min. OPTIONS: • Remote Control Panel • Integrated 1:1 Switch Control and Drive • Redundant and Power Combined Subsystems • SSIPA with Variable Attenuator (provides typical RF Level Adjust Range of 0 to 30 dB) • Integral Linearizer (Requires SSIPA option) • L-Band Block Upconverter (BUC --requires SSIPA) • Forward Power Detection Over CIF • Ethernet Interface Bandwidth Gain Environmental (Operating) -40°C to +55°C operating, including solar loading; -40°C to +75°C non-operating 100% condensing 10,000 ft. with standard adiabatic derating of 2°C/1000 ft., operating; 50,000 ft., non-operating Designed for normal transportation environment per Section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms (1/2 sine pulse) in non-operating configuration. 65 dBA @ 3 ft. from amplifier 1100 W max. Gain Stability Ambient Temperature At constant drive and temp. ±0.25 dB/24hr max. (after 30 min. warmup) Over temp. constant drive ±1.0 dB over operating temp. range (any freq.); ±0.75 dB over ±10°C Relative Humidity Small Signal Gain Slope ±0.02 dB/MHz max. (±0.04 dB/MHz max. Altitude with BUC option) Small Signal Gain Variation 1.0 dB pk-pk across any 40 MHz band; 2.5 dB pk-pk across the 500 MHz band 4.0 dB pk-pk across 500 MHz with linearizer 4.5 dB pk-pk across 500 MHz with BUC 0 to 30 dB typ. (SSIPA option required) 0.1 dB (SSIPA option required) 1.3:1 max. (1.5:1 max. with BUC) 1.3:1 max. 2.0:1 max. continuous operation; any value for operation without damage -50 dBc below 10 kHz -20[1.5 +log F (kHz)] dBc, 10 kHz to 500 kHz -85 dBc above 500 kHz Acoustic Noise Heat Dissipation Shock and Vibration RF Level Adjust Range Attenuator Step-Size Input VSWR Output VSWR Load VSWR Residual AM Mechanical Cooling (TWT) RF Input Connection RF Output Connection Forced air with integral blower Type N female CPR-112 G waveguide flange, grooved with UNC 2B 10-32 threaded holes Type N female 10.25 x 10.5 x 20.5 in. (260 x 267 x 521 mm) 55 lbs (25.0 kg) with no options, max. Phase Noise IESS-308/309 12 dB below mask (3 dB below with BUC) phase noise continuous AC fundamentals related -50 dBc (-33 dBc with BUC) Sum of spurs (370 Hz to 1 MHz) -47 dBc (-39 dBc with BUC) AM/PM Conversion 2.5°/dB max. for a single carrier at 7 dB below rated power (2.5°/dB max. at 3 dB below rated with linearizer) -60 dBc at rated power