VKS-8262N

CPI || V KS-8262 KlyStron CPI 4CW50,000J VKS-8262 Klystron CPI Microwave Power Products (MPP) offers the VKS-8262 series of klystrons for use in particle accelerators for scientific, medical, and industrial applications. These klystrons provide up to 7.5 MW peak at 2.856 or 2.9985 GHz at various rf pulse lengths and duty. Versions are available with up to 36 kW of average output power at 2.856 GHz and 72 kW at 2.9985 GHz. FeATures • Diode Electron Gun • Water Cooled • Electromagnet Focusing • WR-284 Waveguide Output • Thousands in Service • Long Life • Proven Reliability VKS-8262 KlyStronS At 2.856 GHz Product type Peak output Power (MW) 5.5 4.5 3 5 5 Peak Drive Power 200 200 80 200 200 Bandwidth (-3 dB) (MHz) 5 5 5 4 4 Peak Beam Voltage* (kV) 127 125 110 125 125 Peak Beam Current* (A) 92 92 72 91 92 rF Pulse length (µsec) 5.8 10 10 16.3 16.3 Duty VKS-8262S VKS-8262J VKS-8262M VKS-8262F VKS-8262P1 0.00104 0.00314 0.004 0.0072 0.009 VKS-8262 KlyStronS At 2.9985 GHz Product type Peak output Power (MW) 7.5 6 5.5 3 5 5 Peak Drive Power 120 200 200 80 200 200 Bandwidth (-3 dB) (MHz) 5 5 5 5 4 4 Peak Beam Voltage* (kV) 160 135 130 110 125 125 Peak Beam Current* (A) 110 109 105 72 91 92 rF Pulse length (µsec) 4.5 5.0 5.8 10 16.3 16.3 Duty VKS-8262G VKS-8262E VKS-8262D VKS-8262HS VKS-8262K VKS-8262n 0.001 0.001 0.001 0.004 0.0072 0.0144 * These are the maximum allowable operating values according to the Product Specification. Actual operating values are typically lower. The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment zdesign. For information on this and other CPI products, visit our website at: w ww.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : ( 650) 856-0705 | email : marketing@cpii.com CPI | V KS-8262 KlyStron 4CW50,000J VKS-8262 Klystron tyPICAl PEAK outPut PoWEr VErSuS BEAM VoltAGE The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: w ww.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone : 1(800) 414-8823. fax : ( 650) 856-0705 | email : marketing@cpii.com