VPW2827

Electronic Power Conditioner for Millimeter Wave EIKs CPI EPCs are designed and tested to operate a wide variety of CPI Extended Interaction Klystrons and Oscillators. Our EPC architecture is designed to provide optimum protection for the EIK and worry free operation for the user. EIK operating parameters are programmed into onboard memory then password protected. Integration by CPI provides worry-free service and support for long life and reliable operation in this easy to use package. Features: • • • • • • • • • • • • • • • Beam Voltage Anode Voltage Collector Voltage Heater voltage Collector current Body Current Anode Current Heater current Total Power output External Interlock Prime Power Dimensions Remote EIK mounting box Fault Protection Cooling -4.0 to –11.0 kV +1.0 to +6.0 kV Virtual ground / 70% of beam voltage -5.0 to –7.0 V 0 to 150 mA 0 to 20 mA -0.1 to +1.0 mA 0 to 3.0 amps 1.5 kW Inhibits High Voltage 110/220 V, 50/60 Hz 1Ø 8.72x19x24.5 inches (Handles 1.5 inches) Attached by 3 meter HV lead. Size 7.7x9.7x9.7 inches Fully protected for operating designated CPI EIKs Forced air using integral blower. CPI Canada 45 River Drive. Georgetown. Ontario. Canada. L7G2J4 Phone 1-905-877-0161. FAX: 1- 905- 873- 7416. OUR E-MAIL: marketing@cmp.cpii.com EPC and mounting box shown with EIK (EIK is not included with the EPC)