clD-ap91 rev 1
binning & LabeLing
Cree XLamp Xb-D White LeDs
® ®
TabLe of ConTenTs
Introduction......................................................... 1 Bin and Order-Code Format ................................... 2 performance Groups – Brightness (TJ = 85 °c) ........ 2 performance Groups – chromaticity ........................ 3 cree’s Standard chromaticity regions plotted on the 1931 cIe curve .................................................... 6 cree’s Standard Kit codes plotted on aNSI Standard chromaticity regions ............................................ 7 cree’s Standard chromaticity Kits ..........................11 Standard Kits, codes and Bins XB-D aNSI cool white, TJ = 85 °c .....................11 XB-D Neutral white, TJ = 85 °c .........................12 XB-D warm white, TJ = 85 °c ...........................13
inTroDuCTion
This document describes the product nomenclature required to select and order cree’s Xlamp XB-D leDs. Xlamp XB-D leDs are tested and sorted into bins which are then combined into orderable kits, identified by an order code. all Xlamp leDs are tested and sorted by color and brightness into a unique bin. each bin contains leDs from only one color and brightness group and is uniquely identified by a bin code. White XLamp LEDs are sorted by chromaticity (color) and luminous flux (brightness). Color XLamp LEDs are sorted by dominant wavelength (color) and luminous or radiant flux (brightness). LEDs are shipped in reels containing leDs from a single bin and labeled with the corresponding bin code. Xlamp leD packaging details are provided in product data sheets. Kits contain leDs from a number of similar bins
www. cree.com/Xlamp
and are fully defined by their order codes. A full explanation of the order codes for XLamp XB Family leDs, as well as a list of standard order codes, is provided in this document.
copyright © 2011-2012 cree, Inc. all rights reserved. The information in this document is subject to change without notice. cree, the cree logo and Xlamp are registered trademarks of cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
cree, Cree, Inc. 4600 Silicon Drive Durham, NC 27703 Nc USa USA Tel: +1.919.313.5300 www.cree.com/xlamp
xlamp xB-D leD Binning & laBeling
bin anD orDer-CoDe formaT
Bin codes and order codes for XB-D White LEDs are configured in the following manner: order Code
Series XBD = XB-D Configuration B: Voltage class D: Reel size Color Specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum
bin Code
Series XBD = XB-D Configuration B: Voltage class Luminous flux group Color specification 0: No Minimum CRI B: 70 Minimum CRI L: Standard CRI H: 80 CRI Minimum
Chromaticity kit SSSCCC-BD-HHHH-NNNNNVFGG Flux Internal code Color AWT = White
SSSCCC-B-WWW-FFF-VR-AAAA Internal code Vf bin 0: Default Chromaticity bin Color AWT = White
Example Order Code: XBDAWT-00-0000-00000HAE7
Example Bin Code: XBDAWT-0-7A3-Q20-0H-0001
PerformanCe grouPs – brighTness (TJ = 85 °C)
XLamp XB-D White LEDs are tested for luminous flux and placed into one of the following luminous-flux groups.
group Code p2 p3 p4 Q2 Q3 Q4 Q5 r2 r3 r4 r5 S2
min. Luminous flux @ 350 ma (lm) 67.2 73.9 80.6 87.4 93.9 100 107 114 122 130 139 148
max. Luminous flux @ 350 ma (lm) 73.9 80.6 87.4 93.9 100 107 114 122 130 139 148 156
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
2
xlamp xB-D leD Binning & laBeling
PerformanCe grouPs – ChromaTiCiTy
region x 0.2950 0a 0.2920 0.2984 0.3009 0.2980 0r 0.2950 0.3009 0.3037 0.3048 1a 0.3130 0.3144 0.3068 0.3068 1r 0.3144 0.3161 0.3093 0.3215 2a 0.3290 0.3290 0.3222 0.3222 2r 0.3290 0.3290 0.3231 0.3371 3a 0.3451 0.3440 0.3366 0.3366 3r 0.3440 0.3429 0.3361 0.3530 4a 0.3615 0.3590 0.3512 0.3512 4r 0.3590 0.3567 0.3495 y 0.2970 0.3060 0.3133 0.3042 0.2880 0.2970 0.3042 0.2937 0.3207 0.3290 0.3186 0.3113 0.3113 0.3186 0.3059 0.2993 0.3350 0.3417 0.3300 0.3243 0.3243 0.3300 0.3180 0.3120 0.3490 0.3554 0.3427 0.3369 0.3369 0.3428 0.3307 0.3245 0.3597 0.3659 0.3521 0.3465 0.3465 0.3521 0.3389 0.3339 4S 4B 3S 3B 2S 2B 1S 1B 0S 0B region x 0.2920 0.2895 0.2962 0.2984 0.2895 0.2870 0.2937 0.2962 0.3028 0.3115 0.3130 0.3048 0.3005 0.3099 0.3115 0.3028 0.3207 0.3290 0.3290 0.3215 0.3196 0.3290 0.3290 0.3207 0.3376 0.3463 0.3451 0.3371 0.3381 0.3480 0.3463 0.3376 0.3548 0.3641 0.3615 0.3530 0.3571 0.3668 0.3641 0.3548 y 0.3060 0.3135 0.3220 0.3133 0.3135 0.3210 0.3312 0.3220 0.3304 0.3391 0.3290 0.3207 0.3415 0.3509 0.3391 0.3304 0.3462 0.3538 0.3417 0.3350 0.3602 0.3690 0.3538 0.3462 0.3616 0.3687 0.3554 0.3490 0.3762 0.3840 0.3687 0.3616 0.3736 0.3804 0.3659 0.3597 0.3907 0.3957 0.3804 0.3736 4T 4c 3T 3c 2T 2c 1T 1c 0T 0c region x 0.2984 0.2962 0.3028 0.3048 0.2962 0.2937 0.3005 0.3028 0.3115 0.3205 0.3213 0.3130 0.3099 0.3196 0.3205 0.3115 0.3290 0.3376 0.3371 0.3290 0.3290 0.3381 0.3376 0.3290 0.3463 0.3551 0.3533 0.3451 0.3480 0.3571 0.3551 0.3463 0.3641 0.3736 0.3702 0.3615 0.3668 0.3771 0.3736 0.3641 y 0.3133 0.3220 0.3304 0.3207 0.3220 0.3312 0.3415 0.3304 0.3391 0.3481 0.3373 0.3290 0.3509 0.3602 0.3481 0.3391 0.3538 0.3616 0.3490 0.3417 0.3690 0.3762 0.3616 0.3538 0.3687 0.3760 0.3620 0.3554 0.3840 0.3907 0.3760 0.3687 0.3804 0.3874 0.3722 0.3659 0.3957 0.4034 0.3874 0.3804 4U 4D 3U 3D 2U 2D 1U 1D 0U 0D region x 0.2984 0.3048 0.3068 0.3009 0.3037 0.3009 0.3068 0.3093 0.3130 0.3213 0.3221 0.3144 0.3144 0.3221 0.3231 0.3161 0.3290 0.3371 0.3366 0.3290 0.3290 0.3366 0.3361 0.3290 0.3451 0.3533 0.3515 0.3440 0.3440 0.3515 0.3495 0.3429 0.3615 0.3702 0.3670 0.3590 0.3590 0.3670 0.3640 0.3567 y 0.3133 0.3207 0.3113 0.3042 0.2937 0.3042 0.3113 0.2993 0.3290 0.3373 0.3261 0.3186 0.3186 0.3261 0.3120 0.3059 0.3417 0.3490 0.3369 0.3300 0.3300 0.3369 0.3245 0.3180 0.3554 0.3620 0.3487 0.3427 0.3428 0.3487 0.3339 0.3307 0.3659 0.3722 0.3578 0.3521 0.3521 0.3578 0.3440 0.3389
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
3
xlamp xB-D leD Binning & laBeling
PerformanCe grouPs – ChromaTiCiTy (ConTinueD)
region x 0.3670 5a1 0.3686 0.3744 0.3726 0.3702 5B1 0.3719 0.3782 0.3763 0.3825 5c1 0.3847 0.3912 0.3887 0.3783 5D1 0.3804 0.3863 0.3840 0.3670 5r 0.3783 0.3743 0.3640 0.3889 6a1 0.3915 0.3981 0.3953 0.3941 6B1 0.3968 0.4040 0.4010 0.4080 6c1 0.4113 0.4186 0.4150 0.4017 6D1 0.4048 0.4116 0.4082 y 0.3578 0.3649 0.3685 0.3612 0.3722 0.3797 0.3837 0.3760 0.3798 0.3877 0.3917 0.3836 0.3646 0.3721 0.3758 0.3681 0.3578 0.3646 0.3502 0.3440 0.3690 0.3768 0.3800 0.3720 0.3848 0.3930 0.3966 0.3882 0.3916 0.4001 0.4037 0.3950 0.3751 0.3832 0.3865 0.3782 6D2 6c2 6B2 6a2 5S 5D2 5c2 5B2 5a2 region x 0.3686 0.3702 0.3763 0.3744 0.3719 0.3736 0.3802 0.3782 0.3847 0.3869 0.3937 0.3912 0.3804 0.3825 0.3887 0.3863 0.3771 0.3916 0.3869 0.3736 0.3915 0.3941 0.4010 0.3981 0.3968 0.3996 0.4071 0.4040 0.4113 0.4146 0.4222 0.4186 0.4048 0.4080 0.4150 0.4116 y 0.3649 0.3722 0.3760 0.3685 0.3797 0.3874 0.3916 0.3837 0.3877 0.3958 0.4001 0.3917 0.3721 0.3798 0.3836 0.3758 0.4034 0.4127 0.3958 0.3874 0.3768 0.3848 0.3882 0.3800 0.3930 0.4015 0.4052 0.3966 0.4001 0.4089 0.4127 0.4037 0.3832 0.3916 0.3950 0.3865 6D3 6c3 6B3 6a3 5T 5D3 5c3 5B3 5a3 region x 0.3744 0.3763 0.3825 0.3804 0.3782 0.3802 0.3869 0.3847 0.3912 0.3937 0.4006 0.3978 0.3863 0.3887 0.3950 0.3924 0.3916 0.4064 0.4006 0.3869 0.3981 0.4010 0.4080 0.4048 0.4040 0.4071 0.4146 0.4113 0.4186 0.4222 0.4299 0.4259 0.4116 0.4150 0.4221 0.4183 y 0.3685 0.3760 0.3798 0.3721 0.3837 0.3916 0.3958 0.3877 0.3917 0.4001 0.4044 0.3958 0.3758 0.3836 0.3875 0.3794 0.4127 0.4221 0.4044 0.3958 0.3800 0.3882 0.3916 0.3832 0.3966 0.4052 0.4089 0.4001 0.4037 0.4127 0.4165 0.4073 0.3865 0.3950 0.3984 0.3898 6D4 6c4 6B4 6a4 5U 5D4 5c4 5B4 5a4 region x 0.3726 0.3744 0.3804 0.3783 0.3763 0.3782 0.3847 0.3825 0.3887 0.3912 0.3978 0.3950 0.3840 0.3863 0.3924 0.3898 0.3783 0.3898 0.3848 0.3743 0.3953 0.3981 0.4048 0.4017 0.4010 0.4040 0.4113 0.4080 0.4150 0.4186 0.4259 0.4221 0.4082 0.4116 0.4183 0.4147 y 0.3612 0.3685 0.3721 0.3646 0.3760 0.3837 0.3877 0.3798 0.3836 0.3917 0.3958 0.3875 0.3681 0.3758 0.3794 0.3716 0.3646 0.3716 0.3565 0.3502 0.3720 0.3800 0.3832 0.3751 0.3882 0.3966 0.4001 0.3916 0.3950 0.4037 0.4073 0.3984 0.3782 0.3865 0.3898 0.3814
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
4
xlamp xB-D XLamP Xb LeD& laBeling leD Binning binning &
PerformanCe grouPs – ChromaTiCiTy (ConTinueD)
region x 0.3889 6r 0.4017 0.3957 0.3840 0.4147 7a1 0.4183 0.4242 0.4203 0.4221 7B1 0.4259 0.4322 0.4281 0.4342 7c1 0.4385 0.4449 0.4403 0.4259 7D1 0.4300 0.4359 0.4316 0.4373 8a1 0.4418 0.4475 0.4428 0.4465 8B1 0.4513 0.4573 0.4523 0.4582 8c1 0.4634 0.4695 0.4641 0.4483 8D1 0.4532 0.4589 0.4538 y 0.3690 0.3751 0.3596 0.3540 0.3814 0.3898 0.3919 0.3833 0.3984 0.4073 0.4096 0.4006 0.4028 0.4119 0.4141 0.4049 0.3853 0.3939 0.3960 0.3873 0.3893 0.3981 0.3994 0.3906 0.4071 0.4164 0.4178 0.4085 0.4099 0.4193 0.4207 0.4112 0.3919 0.4008 0.4021 0.3931 8D2 8c2 8B2 8a2 7D2 7c2 7B2 7a2 6S region x 0.4054 0.4217 0.4146 0.3996 0.4183 0.4221 0.4281 0.4242 0.4259 0.4299 0.4364 0.4322 0.4385 0.4430 0.4496 0.4449 0.4300 0.4342 0.4403 0.4359 0.4418 0.4465 0.4523 0.4475 0.4513 0.4562 0.4624 0.4573 0.4634 0.4687 0.4750 0.4695 0.4532 0.4582 0.4641 0.4589 y 0.4191 0.4273 0.4089 0.4015 0.3898 0.3984 0.4006 0.3919 0.4073 0.4165 0.4188 0.4096 0.4119 0.4212 0.4236 0.4141 0.3939 0.4028 0.4049 0.3960 0.3981 0.4071 0.4085 0.3994 0.4164 0.4260 0.4274 0.4178 0.4193 0.4289 0.4304 0.4207 0.4008 0.4099 0.4112 0.4021 8D3 8c3 8B3 8a3 7D3 7c3 7B3 7a3 6T region x 0.4217 0.4382 0.4299 0.4146 0.4242 0.4281 0.4342 0.4300 0.4322 0.4364 0.4430 0.4385 0.4449 0.4496 0.4562 0.4513 0.4359 0.4403 0.4465 0.4418 0.4475 0.4523 0.4582 0.4532 0.4573 0.4624 0.4687 0.4634 0.4695 0.4750 0.4813 0.4756 0.4589 0.4641 0.4700 0.4646 y 0.4273 0.4356 0.4165 0.4089 0.3919 0.4006 0.4028 0.3939 0.4096 0.4188 0.4212 0.4119 0.4141 0.4236 0.4260 0.4164 0.3960 0.4049 0.4071 0.3981 0.3994 0.4085 0.4099 0.4008 0.4178 0.4274 0.4289 0.4193 0.4207 0.4304 0.4319 0.4221 0.4021 0.4112 0.4126 0.4034 8D4 8c4 8B4 8a4 7D4 7c4 7B4 7a4 6U region x 0.4017 0.4147 0.4077 0.3957 0.4203 0.4242 0.4300 0.4259 0.4281 0.4322 0.4385 0.4342 0.4403 0.4449 0.4513 0.4465 0.4316 0.4359 0.4418 0.4373 0.4428 0.4475 0.4532 0.4483 0.4523 0.4573 0.4634 0.4582 0.4641 0.4695 0.4756 0.4700 0.4538 0.4589 0.4646 0.4593 y 0.3751 0.3814 0.3652 0.3596 0.3833 0.3919 0.3939 0.3853 0.4006 0.4096 0.4119 0.4028 0.4049 0.4141 0.4164 0.4071 0.3873 0.3960 0.3981 0.3893 0.3906 0.3994 0.4008 0.3919 0.4085 0.4178 0.4193 0.4099 0.4112 0.4207 0.4221 0.4126 0.3931 0.4021 0.4034 0.3944
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
5
xlamp xB-D leD Binning & laBeling
Cree’s sTanDarD ChromaTiCiTy regions PLoTTeD on The 1931 Cie Curve
aNSI cool white
0.40 0.39
5000K
0.38
0.37
6500K
5700K 3S 2T
2S 3B 2C 2B
0.36
0.35
8000K
1T 1S 0T 0S
0B 1B
3A 2D
CCy
0.34 0.33
1C 2A
1D
3R 2U
0.32
0.31
0C
0D
1A 1U
1R 0U
2R
ANSI C78.377A
0A
0.30
0R
0.29 0.28
0.32
0.33
0.34
0.35
CCx
aNSI Neutral white and aNSI warm white
0.46
0.45 0.44
3000K 2700K
0.43
0.42
4000K
3500K
7C2 7C4 8A2 7C3 8B2 8B3 8C2
8C3
0.41
0.40
7B2
7B3 7C1
4500K
6C2
6B3 6B2 6C4
6C3 7B1
8B1
8B4
8C1
8C4
7B4 7D2
8A3
8D2
8D3
7D3 8A1
5C3
6C1 6B4 6D3 6D2
7A1 6D4
CCy
0.39
0.38
5000K
5B3 5B2 5B4
5C2 5C4 5C1 5D3
5D2 6B1
7A2 7A4
7A3 7D1
8A4
8D1
8D4
7D4
6A3
6A2
6A4
6D1
4C 4B
3C 4D
5B1
5A3
5A2 5A4 5D1
0.37
0.36
3B
3D 3A
5D4
6A1
5A1
ANSI C78.377A
4A
0.35
0.34 0.33
0.33
0.35
0.37
0.39
0.41
0.44
0.46
0.48
0.34
0.36
0.38
0.40
0.42
0.43
0.45
0.47
0.36
0.28
0.29
0.30
0.31
CCx
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
0.49
6
xlamp xB-D leD Binning & laBeling
outdoor white
0.43
0.42 0.41
0.40
5000K
4000K
4500K
5T 5S 5C3 5C2 5B3 5B2 5B4 5C1 5D3 5D2 5A3 5A2 5A4 5D1 5U 5D4 5C4
0.39
4S
4T
0.38
3T 3S 3C 4B 4D 4A 3D 3A 4U
4R 3U
4C
5B1
CCy
0.37
0.36 0.35 0.34
0.33 0.32
3R
5A1
5R
3B
ANSI C78.377A
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
CCx
Cree’s sTanDarD CooL WhiTe kiTs PLoTTeD on ansi sTanDarD ChromaTiCiTy regions
0.40 0.39 0.38 0.37
6500K 5700K 5000K
51
2S 1T 2B
3S 2T 3B 2C 3A 2D 2A 3R 2U 2R
0.36 0.35
8000K
0.34
CCy
1S 0T 0S 0B 0A 0C 0D 0U 0R 1B 1A
1C 1D
0.33 0.32 0.31 0.30 0.29 0.28
0.28 0.29
1U 1R
ANSI C78.377A
0.40
0.30 0.31 0.32 0.33 0.34 0.35 0.36
0.41
0.39 0.38 0.37
6500K
5000K
CCx
53
2S 1T 8000K
5700K 3S 2T 3B 2C 2B 3A 2D 2A 3R 2U 2R
0.36 0.35 0.34
CCy
1S 0T 0S 0B 0A 0C 0D 0U 0R 1B 1A 1U 1R
1C 1D
0.33 0.32 0.31 0.30 0.29 0.28
0.28 0.29
ANSI C78.377A
0.30
0.31
CCx
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
0.32
0.33
0.34
0.35
7
0.36
xlamp xB-D leD Binning & laBeling
0.40 0.39 0.38 0.37
6500K 5700K 5000K
50
2S 1T 2B
3S 2T 3B 2C 3A 2D 2A 3R 2U 2R
0.36 0.35
8000K
0.34
CCy
1S 0T 0S 0B 0A 0C 0D 0U 0R 1B 1A
1C 1D
0.33 0.32 0.31 0.30 0.29 0.28
0.28 0.29
1U 1R
ANSI C78.377A
0.30
0.31
CCx
Cree’s ouTDoor WhiTe kiTs PLoTTeD on ansi sTanDarD ChromaTiCiTy regions
0.44 0.43 0.42 0.41 0.40 0.39 0.38 CCy 0.37 0.36 0.35
3A 3S 3C 3B 3D 4U 4R 3U 3R 4A
5000K 4500K 3500K
0.32
0.33
0.34
4000K
6S 5T 6C3 6C2 6B3 5C3 6B2 6B1 6A2 6A4 6A3 6D1 6U 6B4 6D2 6D4 6C1 6D3 6C4
C1
4S 3T 4B 4D
5S 4T 5B2 5B4 4C 5B1 5A3 5A2 5A1 5R 5A4 5D1 5U 5D2 5D4 5C2 5B3 5C1 5D3
5C4
6A1 6R
0.34 0.33 0.32 0.33 0.34
ANSI C78.377A
0.35
6T
0.35
0.36
0.37
0.38
CCx
0.44 0.43 0.42 0.41 0.40 0.39 0.38 CCy 0.37 0.36 0.35
3A 3S 3C 3B 3D 4U 4R 3U 3R 4A
5000K 4500K 3500K
0.39
0.40
0.41
0.42
0.43
0.44
0.36
6T
4000K
6S 5T 6C3 6C2 6B3 5C3 6B2 6B1 6A2 6A4 6A3 6D1 6U 6B4 6D2 6D4 6C1 6D3 6C4
D1
4S 3T 4B 4D
5S 4T 5B2 5B4 4C 5B1 5A3 5A2 5A1 5R 5A4 5D1 5U 5D2 5D4 5C2 5B3 5C1 5D3
5C4
6A1 6R
0.34 0.33 0.32 0.33 0.34
ANSI C78.377A
0.35
0.36
0.37
0.38
CCx
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
0.39
0.40
0.41
0.42
0.43
8
0.44
xlamp xB-D leD Binning & laBeling
0.44 0.43 0.42 0.41 0.40 0.39 0.38
CCy
5000K 4500K 3500K
6T
4000K
6S 5T 6C3 6C2 6B3 5C3 6B2 6B1 6A2 6A4 6A3 6D1 6U 6B4 6D2 6D4 6C1 6D3 6C4
C2
4S 3T 3S 3C 4B 4D 4A 3D 3A 4U 4R 3U 3R
5S 4T 5B2 5B4 4C 5B1 5A3 5A2 5A1 5R 5A4 5D1 5U 5D2 5D4 5C2 5B3 5C1 5D3
5C4
6A1 6R
0.37 0.36 0.35 0.34 0.33 0.32
0.33 0.34
3B
ANSI C78.377A
0.35
0.36
0.37
0.38
CCx
0.39
0.40
0.41
0.42
0.44 0.43 0.42 0.41 0.40 0.39 0.38 CCy 0.37 0.36 0.35
3A 3S 3C 3B 3D 4U 4R 3U 3R 4A
5000K 4500K 3500K
0.43
0.44
6T
4000K
6S 5T 6C3 6C2 6B3 5C3 6B2 6B1 6A2 6A4 6A3 6D1 6U 6B4 6D2 6D4 6C1 6D3 6C4
D2
4S 3T 4B 4D
5S 4T 5B2 5B4 4C 5B1 5A3 5A2 5A1 5R 5A4 5D1 5U 5D2 5D4 5C2 5B3 5C1 5D3
5C4
6A1 6R
0.34 0.33 0.32 0.33 0.34
ANSI C78.377A
0.35
0.36
0.37
0.38
CCx
0.44 0.43 0.42 0.41 0.40 0.39 0.38
5000K 4500K 3500K
6T
C3
5S 5B3 5B2 5B4 5C1
4000K
6S 5T 6B3 5C3 6B2 6B1 6A2 6A4 6A3 6D1 6U 6B4 6D2 6D4 6C1 6D3 6C3 6C2 6C4
4T 4S
5C2 5C4 5D3 5D2 5A3 5D1 5U 5D4
3T 3S 3C 4B 4D 4A 3D 3A 4U 4R 3U 3R
CCy
4C
5B1 5A2 5A1 5R 5A4
6A1 6R
0.37 0.36 0.35 0.34 0.33 0.32
3B
ANSI C78.377A
0.33
0.34
0.35
0.36
0.37
0.38
CCx
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
0.39
0.40
0.41
0.42
0.43
0.44
0.39
0.40
0.41
0.42
0.43
0.44
9
xlamp xB-D leD Binning & laBeling
Cree’s sTanDarD Warm anD neuTraL WhiTe kiTs PLoTTeD on ansi sTanDarD ChromaTiCiTy regions
0.46 0.45 0.44 0.43 0.42 0.41 0.40 CCy 0.39 0.38 0.37 0.36 0.35
3A
2700K 3000K
3500K 4000K 4500K
E7
7B2 7B3 7C1 7D3 8A1 7C2 7C4 8A2 7C3 8B1 7B1 7B4 7D2 7D4 8A3 7A3 7D1
E8
8B2 8B3 8C2 8C3 8B4 8C1 8C4 8D2 8D3
E6
6B3 6B2 6B4 6C1 6B1 6A3 6D2 6D4 6D1 6A4
6C3 6C2 6C4 7A2 6D3 7A1 7A4
5000K
E5 E4
4C 4B
5B3 5B2 5B4 5B1 5A3 5A2 5A4 5A1 5D1 5D2
5C3 5C2 5C4
8A4
8D1
8D4
5C1 5D3 6A2
E3
3C 3B 3D
5D4
6A1
4D 4A
ANSI C78.377A
0.34 0.33 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48
2700K 3000K
8C3
CCx
0.46 0.45 0.44 0.43 0.42 0.41 0.40
4500K 4000K 3500K
F7
7B2 7B3 7C1 7B1 7B4 7D2 7D4 7A3 7D1
F8
7C2 7C4 8A2 7C3 8B2 8B3 8C2 8B1 8B4 8C1 8C4 8A3 8D2 8D3
F6
6B3 5C3 5C2 5B3 5C1 5B4 5D3 5D2 5A3 5D4 5D1 5A4 6A1 6A2 6A4 5C4 6B1 6A3 6D1 6B2 6B4 6D2 6C1 5B2 6D4
6C3 6C2 6C4 7A2 6D3 7A1 7A4
CCy
0.39 0.38 0.37
5000K
F5
4C
5B1
7D3 8A1
8A4
8D1
8D4
F4
4B 3C 4D 3B 3D 3A 4A
5A2 5A1
0.36 0.35 0.34 0.33
ANSI C78.377A
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
CCx
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.49
10
xlamp xB-D leD Binning & laBeling
Cree’s sTanDarD ChromaTiCiTy kiTs
The following table provides the chromaticity bins associated with chromaticity kits.
Color cool white kit 51 53 50 e3 c1 F4 D1 Neutral white e4 D2 c2 c3 F5 e5 F6 e6 warm white F7 e7 F8 e8 Chromaticity bins 0a, 0B, 0c, 0D, 0r, 0S, 0T, 0U, 1a, 1B, 1c, 1D, 1r, 1S, 1T, 1U, 2a, 2B, 2c, 2D, 2r, 2S, 2T, 2U, 3a, 3B, 3r, 3S 1a, 1B, 1c, 1D, 1r, 1S, 1T, 1U, 2a, 2B, 2c, 2D, 2r, 2S, 2T, 3a, 3B, 3S 1a, 1B, 1c, 1D, 2a, 2B, 2c, 2D 3a, 3B, 3c, 3D 3a, 3B, 3c, 3D, 3r, 3S, 3T, 3U, 4a, 4B, 4r, 4S 3c, 3D, 4a, 4B 3a, 3B, 3c, 3D, 3r, 3S, 3T, 3U, 4a, 4B, 4c, 4D, 4r, 4S, 4T, 4U 4a, 4B, 4c, 4D 3c, 3D, 3T, 3U, 4a, 4B, 4c, 4D, 4r, 4S, 4T, 4U, 5a1, 5a2, 5a3, 5a4, 5B1, 5B2, 5B3, 5B4, 5r, 5S 3c, 3D, 3T, 3U, 4a, 4B, 4c, 4D, 4r, 4S, 4T, 4U 4a, 4B, 4c, 4D, 4r, 4S, 4T, 4U, 5a1, 5a2, 5a3, 5a4, 5B1, 5B2, 5B3, 5B4, 5r, 5S 4c, 4D, 5a1, 5a2, 5a3, 5a4, 5B1, 5B2, 5B3, 5B4 5a1, 5a2, 5a3, 5a4, 5B1, 5B2, 5B3, 5B4, 5c1, 5c2, 5c3, 5c4, 5D1, 5D2, 5D3, 5D4 5c1, 5c2, 5c3, 5c4, 5D1, 5D2, 5D3, 5D4, 6a1, 6a2, 6a3, 6a4, 6B1, 6B2, 6B3, 6B4 6a1, 6a2, 6a3, 6a4, 6B1, 6B2, 6B3, 6B4, 6c1, 6c2, 6c3, 6c4, 6D1, 6D2, 6D3, 6D4 6c1, 6c2, 6c3, 6c4, 6D1, 6D2, 6D3, 6D4, 7a1, 7a2, 7a3, 7a4, 7B1, 7B2, 7B3, 7B4 7a1, 7a2, 7a3, 7a4, 7B1, 7B2, 7B3, 7B4, 7c1, 7c2, 7c3, 7c4, 7D1, 7D2, 7D3, 7D4 7c1, 7c2, 7c3, 7c4, 7D1, 7D2, 7D3, 7D4, 8a1, 8a2, 8a3, 8a4, 8B1, 8B2, 8B3, 8B4 8a1, 8a2, 8a3, 8a4, 8B1, 8B2, 8B3, 8B4, 8c1, 8c2, 8c3, 8c4, 8D1, 8D2, 8D3, 8D4
The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp XB-D LEDs. For other flux and chromaticity combinations, contact Cree or an authorized distributor.
sTanDarD orDer CoDes anD bins (Xb-D ansi CooL WhiTe, TJ = 85 °C)
XLamp Xb-D standard kit Codes - White Chromaticity kit CCT minimum Luminous flux (lm) @ 350 ma* Code flux (lm) no minimum Cri order Codes 70 Cri minimum
aNSI cool white (5000 K – 8300 K) r4 51 6200 K r3 r2 r4 53 6000 K r3 r2 r4 50 6200 K r3 r2 130 122 114 130 122 114 130 122 114 XBDawT-00-0000-000000G51 XBDAWT-00-0000-000000F51 XBDawT-00-0000-000000e51 XBDawT-00-0000-000000G53 XBDAWT-00-0000-000000F53 XBDawT-00-0000-000000e53 XBDawT-00-0000-000000G50 XBDAWT-00-0000-000000F50 XBDawT-00-0000-000000e50 XBDawT-00-0000-00000BG51 XBDAWT-00-0000-00000BF51 XBDawT-00-0000-00000Be51 XBDawT-00-0000-00000BG53 XBDAWT-00-0000-00000BF53 XBDawT-00-0000-00000Be53 XBDawT-00-0000-00000BG50 XBDAWT-00-0000-00000BF50 XBDawT-00-0000-00000Be50
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
11
xlamp xB-D leD Binning & laBeling
sTanDarD orDer CoDes anD bins (Xb-D neuTraL WhiTe, TJ = 85 °C)
XLamp Xb-D standard kit Codes - White Chromaticity kit CCT minimum Luminous flux (lm) @ 350 ma* Code flux (lm) order Codes standard Cri
aNSI Neutral white (3700 K – 5000 K) r3 e3 5000 K r2 Q5 r3 c1 5000 K r2 Q5 r2 F4 4750 K Q5 Q4 r3 D1 4750 K r2 Q5 r2 e4 4500 K Q5 Q4 r2 D2 4500 K Q5 Q4 r3 c2 4500 K r2 Q5 r3 c3 4300 K r2 Q5 Q5 F5 4250 K Q4 Q3 Q5 e5 4000 K Q4 Q3 122 114 107 122 114 107 114 107 100 122 114 107 114 107 100 114 107 100 122 114 107 122 114 107 107 100 93.9 107 100 93.9 XBDAWT-00-0000-00000LFE3 XBDawT-00-0000-00000lee3 XBDawT-00-0000-00000lDe3 XBDAWT-00-0000-00000LFC1 XBDawT-00-0000-00000lec1 XBDawT-00-0000-00000lDc1 XBDAWT-00-0000-00000LEF4 XBDAWT-00-0000-00000LDF4 XBDAWT-00-0000-00000LCF4 XBDAWT-00-0000-00000LFD1 XBDawT-00-0000-00000leD1 XBDawT-00-0000-00000lDD1 XBDawT-00-0000-00000lee4 XBDawT-00-0000-00000lDe4 XBDawT-00-0000-00000lce4 XBDawT-00-0000-00000leD2 XBDawT-00-0000-00000lDD2 XBDawT-00-0000-00000lcD2 XBDAWT-00-0000-00000LFC2 XBDawT-00-0000-00000lec2 XBDawT-00-0000-00000lDc2 XBDAWT-00-0000-00000LFC3 XBDawT-00-0000-00000lec3 XBDawT-00-0000-00000lDc3 XBDAWT-00-0000-00000LDF5 XBDAWT-00-0000-00000LCF5 XBDAWT-00-0000-00000LBF5 XBDawT-00-0000-00000lDe5 XBDawT-00-0000-00000lce5 XBDawT-00-0000-00000lBe5
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
12
xlamp xB-D leD Binning & laBeling
sTanDarD orDer CoDes anD bins (Xb-D Warm WhiTe, TJ = 85 °C)
XLamp Xb-D standard kit Codes - White Chromaticity minimum Luminous flux (lm) @ 350 ma* Code flux (lm) standard Cri order Codes
kit
CCT
80 Cri minimum
aNSI warm white (2700 K - 3750 K) Q5 F6 3750 K Q4 Q3 Q5 e6 3500 K Q4 Q3 Q4 F7 3250 K Q3 Q2 Q4 e7 3000 K Q3 Q2 Q3 F8 2850 K Q2 p4 Q3 e8 2700 K Q2 p4 107 100 93.9 107 100 93.9 100 93.9 87.4 100 93.9 87.4 93.9 87.4 80.6 93.9 87.4 80.6 XBDAWT-00-0000-00000LDF6 XBDAWT-00-0000-00000LCF6 XBDAWT-00-0000-00000LBF6 XBDawT-00-0000-00000lDe6 XBDawT-00-0000-00000lce6 XBDawT-00-0000-00000lBe6 XBDAWT-00-0000-00000LCF7 XBDAWT-00-0000-00000LBF7 XBDAWT-00-0000-00000LAF7 XBDawT-00-0000-00000lce7 XBDawT-00-0000-00000lBe7 XBDawT-00-0000-00000lae7 XBDAWT-00-0000-00000LBF8 XBDAWT-00-0000-00000LAF8 XBDAWT-00-0000-00000L9F8 XBDawT-00-0000-00000lBe8 XBDawT-00-0000-00000lae8 XBDawT-00-0000-00000l9e8 XBDAWT-00-0000-00000HDF6 XBDAWT-00-0000-00000HCF6 XBDAWT-00-0000-00000HBF6 XBDAWT-00-0000-00000HDE6 XBDAWT-00-0000-00000HCE6 XBDAWT-00-0000-00000HBE6 XBDAWT-00-0000-00000HCF7 XBDAWT-00-0000-00000HBF7 XBDAWT-00-0000-00000HAF7 XBDAWT-00-0000-00000HCE7 XBDAWT-00-0000-00000HBE7 XBDAWT-00-0000-00000HAE7 XBDAWT-00-0000-00000HBF8 XBDAWT-00-0000-00000HAF8 XBDAWT-00-0000-00000H9F8 XBDAWT-00-0000-00000HBE8 XBDAWT-00-0000-00000HAE8 XBDAWT-00-0000-00000H9E8
• Typical CRI for Warm White, 2600 K - 3700 K CCT is 80. • Typical CRI for Neutral White, 3700 K - 5000K CCT is 75.
* Cree XLamp XB Family order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code
Copyright © 2011-2012 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com.
13
