CLN6A-WKW-CK0L0453

Cree® CLN6A-WKW/MKW Data Sheet The CLN6A LED delivers superior value with common voltage, current, size and optical properties. The Cree CLN6A is available in both cool and warm white to address a variety of lighting applications, including linear, portable, landscape and entertainment. FEATURES • • Size (mm): 5.0 x 5.0 x 1.3 Cool White (CLN6A-WKW): » CCT: 4600 K - 15000 K, typical 5500 K » CRI: 72 » Luminous Flux: 60.5 - 101.8 Warm White (CLN6A-MKW) » CCT: 2500 K - 4600 K, typical 3200 K » CRI: 80 » Luminous Flux: 51.0 - 101.8 Max. Current: 350 mA Viewing Angle: 115° RoHS-Compliant APPLICATIONS • • • • Linear Lighting Channel Letter Portable Lighting Architectural & Landscaping Lighting Entertainment Lighting • • • • • LD-CT979.003 Data Sheet: C Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Cool/Warm Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Note 1 Unit IF IFP VR PD Topr Tstg TJ 350 600 5 1200 -40 ~ +90 -40 ~ +100 125 mA mA V mW °C °C °C Note: 1. Pulse width ≤10 msec, duty cycle ≤10%. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Luminous Flux Color Cool/Warm Cool/Warm Cool Warm Cool Chromaticity Coordinates Warm Thermal Resistance, junction to solder point Note 1 Viewing Angle (FWHM) Cool/Warm Cool/Warm Symbol VF IR ΦV ΦV x y x y RTHJS 2θ½ Condition IF = 300 mA VR = 5 V IF = 300 mA IF = 300 mA IF = 300 mA IF = 300 mA IF = 300 mA IF = 300 mA IF = 300 mA IF = 300 mA °C/W deg Unit V μA lm lm 60.5 51.0 80 65 0.3325 0.3411 0.4234 0.3990 15 115 Minimum Typical 3.8 Maximum 4.4 100 Note: 1. Rth test condition: mounted on MCPCB (pad size ≥40 mm2). Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Flux Bin Limit (IF = 300 mA) Cool White Bin Code J0 K0 L0 Min.(lm) 60.5 72.0 85.6 Max.(lm) 72.0 85.6 101.8 Warm White Bin Code H0 J0 K0 L0 Min.(lm) 51.0 60.5 72.0 85.6 Max.(lm) 60.5 72.0 85.6 101.8 Tolerance of measurement of luminous flux is ±10%. VF Bin Limit (IF = 300 mA) Cool White Bin Code 44 45 46 47 Min.(V) 2.8 3.2 3.6 4.0 Max.(V) 3.2 3.6 4.0 4.4 Warm White Bin Code 44 45 46 47 Min.(V) 2.8 3.2 3.6 4.0 Max.(V) 3.2 3.6 4.0 4.4 Tolerance of measurement of VF is ±0.05 V. Color Bin Limit (IF = 300 mA) Cool White Bin Code Subbin x 0.2545 Wa 0.2633 0.2545 0.2450 0.2633 Wb 0.2720 0.2640 0.2545 0.2545 Wc 0.2640 0.2720 0.2633 0.2633 Wd 0.2720 0.2800 0.2720 y 0.2480 0.2410 0.2245 0.2290 0.2410 0.2340 0.2200 0.2245 0.2480 0.2670 0.2575 0.2410 0.2410 0.2575 0.2480 0.2340 Wh W2 Wf We Bin Code Subbin x 0.2640 0.2735 0.2808 0.2720 0.2720 0.2808 0.2880 0.2800 0.2735 Wg 0.2830 0.2895 0.2808 0.2808 0.2895 0.2960 0.2880 y 0.2670 0.2860 0.2740 0.2575 0.2575 0.2740 0.2620 0.2480 0.2860 0.3050 0.2905 0.2740 0.2740 0.2905 0.2760 0.2620 Wn W3 Wk Wj Bin Code Subbin x 0.2830 0.2950 0.2998 0.2895 0.2895 0.2998 0.3045 0.2960 0.2950 Wm 0.3070 0.3100 0.2998 0.2998 0.3100 0.3130 0.3045 y 0.3050 0.3210 0.3028 0.2905 0.2905 0.3028 0.2865 0.2760 0.3210 0.3370 0.3150 0.3028 0.3028 0.3150 0.2970 0.2865 W1 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Color Bin Limit (IF = 300 mA) Cool White Bin Code Subbin x 0.3070 Wp 0.3185 0.3200 0.3100 0.3100 Wq 0.3200 0.3215 0.3130 0.3185 Wr 0.3300 0.3300 0.3200 0.3200 Ws 0.3300 0.3300 0.3215 y 0.3370 0.3485 0.3270 0.3150 0.3150 0.3270 0.3075 0.2970 0.3485 0.3600 0.3390 0.3270 0.3270 0.3390 0.3180 0.3075 Ww W5 Wu Wt Bin Code Subbin x 0.3300 0.3455 0.3443 0.3300 0.3300 0.3443 0.3430 0.3300 0.3455 Wv 0.3610 0.3585 0.3443 0.3443 0.3585 0.3560 0.3430 y 0.3600 0.3725 0.3535 0.3390 0.3390 0.3535 0.3345 0.3180 0.3725 0.3850 0.3680 0.3535 0.3535 0.3680 0.3510 0.3345 W4 Tolerance of measurement of the color coordinates is ±0.01. Warm White Bin Code Subbin x 0.3610 Ma 0.3576 0.3751 0.3820 0.3576 Mb 0.3541 0.3682 0.3749 0.3820 Mc 0.3751 0.3926 0.4030 0.3751 Md 0.3682 0.3822 0.3926 y 0.3900 0.3651 0.3783 0.4075 0.3651 0.3401 0.3491 0.3781 0.4075 0.3783 0.3915 0.4250 0.3783 0.3491 0.3580 0.3915 Mh M2 Mf Me Bin Code Subbin x 0.4030 0.3926 0.4118 0.4260 0.3926 0.3822 0.3976 0.4118 0.4260 Mg 0.4118 0.4310 0.4490 0.4118 0.3976 0.4129 0.4310 y 0.4250 0.3915 0.4021 0.4390 0.3915 0.3580 0.3653 0.4021 0.4390 0.4021 0.4128 0.4530 0.4021 0.3653 0.3725 0.4128 Mn M3 Mk Mj Bin Code Subbin x 0.4490 0.4310 0.4572 0.4785 0.4310 0.4129 0.4359 0.4572 0.4785 Mm 0.4572 0.4834 0.5080 0.4572 0.4359 0.4588 0.4834 y 0.4530 0.4128 0.4203 0.4625 0.4128 0.3726 0.3782 0.4203 0.4625 0.4203 0.4279 0.4720 0.4203 0.3782 0.3838 0.4279 M1 Tolerance of measurement of the color coordinates is ±0.01. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram 0.5300 0.4700 M3 Mm Mj Mg 0.4100 0K 500 M Me Mc Mk Mf Mh Mn 60 00 K Ma W v Mb w Md W 5 1 M 70 00 K 4 W W r 80 00 K 0.3500 y W t W W W m W W k W 3000K 3500K 4000K 10 00 0K 9 00 0K 3 p u W q W s W j g W h W n W 0.2900 W 2 W W e W f W c 1 W 0.2300 W d a W b 0.1700 0.1700 0.2300 0.2900 0.3500 x 0.4100 2 2700K 2500K 0.4700 0.5300 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Luminous Flux (lm) Min. Cool White Cool White Cool White Cool White Cool White CLN6A-WKW-CJ0L0153 CLN6A-WKW-CJ0L0343 CLN6A-WKW-CJ0L0453 CLN6A-WKW-CK0L0343 CLN6A-WKW-CK0L0453 115 115 115 115 115 60.5 60.5 60.5 72.0 72.0 Max. 101.8 101.8 101.8 101.8 101.8 W1,W2,W3,W4,W5 W3,W4 W4,W5 W3,W4 W4,W5 Color Kit Number Viewing Angle Color Bin Code Color Warm White Warm White Warm White Warm White Warm White Warm White Warm White Kit Number CLN6A-MKW-CH0K0133 CLN6A-MKW-CH0K0233 CLN6A-MKW-CH0K0513 CLN6A-MKW-CJ0K0233 CLN6A-MKW-CJ0K0513 CLN6A-MKW-CH0L0513 CLN6A-MKW-CJ0L0513 Viewing Angle 115 115 115 115 115 115 115 Luminous Flux (lm) Min. 51.0 51.0 51.0 60.5 60.5 51.0 60.5 Max. 85.6 85.6 85.6 85.6 85.6 101.8 101.8 Color Bin Code M1,M2,M3 M2,M3 W5,M1 M2,M3 W5,M1 W5,M1 W5,M1 Note: • The above kit numbers represent the order codes that include multiple flux-bin and color-bin codes. Only one fluxbin code and one color-bin code will be shipped on each reel. Single flux-bin codes and single color-bin code cannotb be ordered. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs If (mA) 600 500 400 300 200 0.0 2.6 Vf(V) 3.0 3.4 3.8 4.2 4.6 5.0 (RELATIVE LUMINOUS FLUX) 2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 100 200 300 400 500 600 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. (RELATIVE LUMINOUS FLUX) FIG.2 RELATIVE LUMINOUS FLUX VS. FORWARD CURRENT 100% 80% (RELATIVE RADIANT POWER) 1.0 5000K - 10000K CCT 60% 3700K - 5000K CCT 2600K - 3700K CCT 0.5 40% 20% 0.0 FIG.3 RELATIVE LUMINOUS FLUX VS AMBIENT TEMPERATURE DERATING BASED ON Tjmax=125 C 0 20 40 60 80 Ta ( C) 100 WL(nm) 0% 400 450 500 550 600 650 700 750 FIG.4 RELATIVE SPECTRAL POWER DISTRIBUTION 50% Power Angle : 115 (RELATIVE LUMINOUS FLUX) 0 1.0 500 400 300 200 100 0.0 IF(mA) 0.5 0 20 40 60 80 Ta ( C) 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE. DERATING BASED ON Tjmax=125 C 0 -60 -90 -30 FIG.6 FAR FIELD PATTERN 0 30 60 90 Angle Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Heatsink Internal Circuit Cathode Cathode Cathode Anode Anode Anode ESD Protection Heatsink Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 9 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Reliability Tests and Results Test Temperature Cycle* Thermal Shock* Moisture Resistance High Temperature Storage Temperature Humidity Storage Low Temperature Storage High Temperature Life Test* Life Test* High Humidity Heat Life Test* Low Temperature Life Test Resistance to Soldering Heat(Reflow Soldering)* Solder ability (Reflow Soldering) Vibration-variable Frequency Substrate Bending Adhesion Strength Applicable Standards JEITA ED-4701 100 105 MIL-STD-202G JEITA ED-4701 200 203 JEITA ED-4701 200 201 JEITA ED-4701 100 103 JEITA ED-4701 200 202 JEITA ED-4701 300 301 JEITA ED-4701 300 303 MIL-STE-883 Method 2007 JEITA ED-4702 JEITA ED-4702 MIL-STD-883 Method 2007 Test Condition -40°C~25°C~100°C~25°C 30 mins, 5 mins, 30 mins, 5 mins -40°C~100°C 30 mins, 30 mins 25°C~65°C~ 90%RH 24hrs/1cycle TA=100°C TA=60°C RH=90% TA=-40°C TA=85°C IF=160 mA TA=25°C IF=350 mA 60°C RH=90% IF=250 mA Ta=-30°C IF=300 mA Tsol=260(±5)°C,10sec (Pre treatment 30°C,70%,168hrs) TSOL=215±5°C, 3 sec (Lead Solder) 20G min, 20 to 2000Hz, 4cycles, 4mins, Each x,y,z 3mm, 5±1 sec 5N, 10±1 sec Note 100 cycles 100 cycles 10 cycles 1000 hrs 1000 hrs 1000 hrs 1000 hrs 1000 hrs 500 hrs 1000 hrs 2 times 1 time (over 95%) 16 mins 1 time 1 time Number of Damaged 0/50 0/50 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 0/25 Electrostatic Discharge Test Human body model 1000 V +/-1 time 0/25 Items marked with * are selective. Failure Criteria Item Forward Voltage Reverse Current Luminous Flux/Intensity Resistance to Soldering Heat Vibration-variable Frequency Symbol VF IR ФV Test Condition IF = 300 mA VR = 5 V IF = 300 mA IF = 300 mA IF = 300 mA Criteria for Judgment Min. – Initial Data x 0.7 No dead lamps and visual damage No dead lamps and visual damage Max. Initial Data x 1.1 100 μA - Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 10 CLD-CT979.003 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Soldering & Handling 1. Cleaning • Don’t use unspecified chemical liquids to clean the SMD LED; the chemical could harm the SMD LED. When washing is necessary, please immerse the SMD LED in alcohol at normal room temperature for less than 1 minute and dry at normal room temperature for 15 minutes before use. • The influence of ultrasonic cleaning on the SMD LED depending on factors such as ultrasonic power and the way SMD LED are mounted. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the SMD LED. Moisture-Proof Packing • In order to prevent moisture absorption into SMD LED during the transportation and storage, SMD LED is packed in a moisture barrier bag. Desiccants and a humidity indicator are packed together with SMD LED as the secondary protection. The indication of humidity indicator card provides the information of humidity within SMD packing. Storage • Shelf life in original sealed bag at storage condition of