CP41B-RFS

Cree® P4 LED CP41B-RDS/ADS (40 degrees) CP41B-RFS/AFS (70 degrees) CP41B-RHS/AHS (100 degrees) Data Sheet This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high-current capabilities. The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs red and amber LED materials, which allows designers to match the color of many lighting applications like vehicle signal lamps, channel letters and gaming-equipment lighting. FEATURES • • Size (mm): 7.6 x 7.6 Color and Typical Dominant Wavelength (nm): » Red (628) » Amber (591) Luminous Flux (mlm) » CP41B-RDS (4400 - 11000) » CP41B-RFS (4400 - 11000) » CP41B-RHS (4400 - 13200) » CP41B-ADS (4400 - 11000) » CP41B-AFS (5500 - 13200) » CP41B-AHS (5500 - 13200) Lead-Free RoHS Compliant APPLICATIONS • • Channel Letter Amusement • • • 0 LD-CT1143.00 Data Sheet: C Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Red/Amber Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Note2 Unit IF IFP VR PD Topr Tstg Tsol 70 Note1 mA mA V mW °C °C 200 5 220 -40 ~ +100 -40 ~ +100 Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) Note: 1. 2. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Color Red/Amber Red/Amber Red Amber CP41B-RDS (40 degree) Red Luminous Flux Amber CP41B-RFS (70 degree) CP41B-RHS (100 degree) CP41B-ADS (40 degree) CP41B-AFS (70 degree) CP41B-AHS (100 degree) CP41B-RDS/ADS 50% Power Angle CP41B-RFS/AFS CP41B-RHS/AHS Symbol VF IR λD λD Φv Φv Φv Φv Φv Φv 2θ½ 2θ½ 2θ½ Condition IF = 70 mA VR = 5 V IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA Unit V μA nm nm mlm mlm mlm mlm mlm mlm deg deg deg 620 584 4400 4400 5500 4400 5500 5500 628 591 7000 7500 8000 6500 7500 8000 40 70 100 Minimum Typical 2.5 Maximum 3.0 100 637 599 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Flux Bin Limit (IF = 70 mA) Red CP41B-RDS/RFS (40/70 degree) Bin Code L0 M0 N0 P0 Min. (mlm) 4400 5500 6600 8730 Max. (mlm) 5500 6600 8730 11000 Amber CP41B-ADS (40 degree) Bin Code L0 M0 N0 P0 Min. (mlm) 4400 5500 6600 8730 Max. (mlm) 5500 6600 8730 11000 CP41B-RHS (100 degree) Bin Code L0 M0 N0 P0 Q0 Min. (mlm) 4400 5500 6600 8730 11000 Max. (mlm) 5500 6600 8730 11000 13200 CP41B-AFS/AHS (70/100 degree) Bin Code M0 N0 P0 Q0 Min. (mlm) 5500 6600 8730 11000 Max. (mlm) 6600 8730 11000 13200 Tolerance of measurement of luminous Flux is ±15% Color Bin Limit (IF = 70 mA) Red Bin Code RE Min. (nm) 620 Max. (nm) 637 Amber Bin Code A2 A3 A4 A5 A6 Min. (nm) 584 587 590 593 596 Max. (nm) 587 590 593 596 599 Tolerance of measurement of dominant wavelength is ±1 nm VF Bin Limit (IF = 70 mA) Red Bin Code 23 24 25 26 27 Min. (V) 2.0 2.2 2.4 2.6 2.8 Max. (V) 2.2 2.4 2.6 2.8 3.0 Amber Bin Code 23 24 25 26 27 Min. (V) 2.0 2.2 2.4 2.6 2.8 Max. (V) 2.2 2.4 2.6 2.8 3.0 Tolerance of measurement of VF is ± 0.05 V Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 100.0 80.0 60.0 40.0 20.0 0.0 IF (mA) 1.25 1.0 Red Amber IV(%) 0.75 0.5 0.25 Red Amber 1.8 2.0 2.2 2.4 2.6 2.8 VF(V) 0.0 0 20 40 60 80 IF(mA) 100 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -60 -50 -40 -30 -20 -10 FIG.2 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT (RELATIVE LUMINOUS INTENSITY) 0 -10 -20 -30 -40 100% 80% Amber Red Vr(V) 60% 40% 20% 0% 300 400 500 600 700 WL(nm) 800 900 -50 Ir(uA) FIG.3 Red & Amber REVERSE CURRENT VS. REVERSE VOLTAGE. IF(mA) 100 80 60 40 20 Ta( C) 40 20 60 80 100 0 FIG.5 Red & Amber MAXIMUM FORWARD DCCURRENT VS AMBIENT TEMPERATURE (Tjmax=120 C) 0 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. CP41B-RDS/ADS 50% Power Angle : 40 IV(%) 0 1.0 0.5 0 -60 -90 -30 FIG.6 FAR FIELD PATTERN 0 30 60 Angle 90 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs 1.0 IV(%) CP41B-RHS/AHS 50% Power Angle : 70 0 1.0 IV(%) CP41B-RFS 50% Power Angle : 100 0 0.5 0.5 0 -90 -60 -30 0 30 60 Angle 90 FIG.7 FAR FIELD PATTERN CP41B-AFS 50% Power Angle : 100 0 0 -60 -90 -30 FIG.8 FAR FIELD PATTERN 0 30 60 Angle 90 1.0 IV(%) 0.5 0 -60 -90 -30 FIG.9 FAR FIELD PATTERN 0 30 60 Angle 90 Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1143.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. Document No. Rev. No. Dimension Drawing SPE/LP377UHR1-70G-01-MT 00 Applications: - Advertising Signs Indicators Traffic CP41B-RHS/AHS: CP41B-RDS/RFS/ADS/AFS: Automotive Lighting Absolute Maximum Ratings at Ta = 25°C Items Forward Current *2 Symbol IF IFP VR PD Topr Tstg Tsol ESD Absolute maximum Rating 70 200 5 210 -40 ~ +100 -40 ~ +100 Unit mA mA V mW Peak Forward Current*1 Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E) *1 pulse width