Cree® P4 LED CP42B-RKS/AKS
Data Sheet
This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs green and blue LED materials, which allow designers to match the color of many lighting applications like vehicle signal lamps and amusement lighting.
FEATURES • Size (mm): 7.6 x 7.6 • Color and Typical Dominant Wavelength (nm): Red (624) Amber (591) • Luminous Flux (mlm) Red (4400 - 11000) Amber (5500 - 13200) • Lead-Free • RoHS Compliant
APPLICATIONS • Channel Letter • Amusement
1 LD-CT1133.00 Data Sheet: C
Subject to change without notice. www.cree.com/ledlamps
1
Absolute Maximum Ratings (TA = 25°C)
Items Symbol Absolute Maximum Rating Red/Amber Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E)
Note2
Unit
IF IFP VR PD Topr Tstg Tsol ESD
70
Note1
mA mA V mW °C °C
200 5 210 -40 ~ +100 -40 ~ +100
Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) Class 2
Note:
1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2. Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics Forward Voltage Reverse Current Dominant Wavelength Color Red/Amber Red/Amber Red Amber Red Amber Red/Amber Symbol VF IR λD λD Φv Φv 2θ½ Condition IF = 70 mA VR = 5 V IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA Unit V μA nm nm mlm mlm deg 618 584 4400 5500 624 591 6000 7000 120 Minimum Typical 2.5 Maximum 3.0 100 630 599
Luminous Flux 50% Power Angle
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Flux Bin Limit (IF = 70 mA)
Red
Bin Code L0 M0 N0 P0 Min.(mlm) 4400 5500 6600 8730 Max.(mlm) 5500 6600 8730 11000
Amber
Bin Code M0 N0 P0 Q0 Min.(mlm) 5500 6600 8730 11000 Max.(mlm) 6600 8730 11000 13200
• Tolerance of measurement of luminous flux is ±15%
Color Bin Limit (IF = 70 mA)
Red
Bin Code RA Min.(nm) 618 Max.(nm) 630
Amber
Bin Code A2 A3 A4 A5 A6 Min.(nm) 584 587 590 593 596 Max.(nm) 587 590 593 596 599
• Tolerance of measurement of dominant wavelength is ±1 nm
VF Bin Limit (IF = 70 mA)
Red
Bin Code 23 24 25 26 27 Min.(V) 2.0 2.2 2.4 2.6 2.8 Max.(V) 2.2 2.4 2.6 2.8 3.0
Amber
Bin Code 23 24 25 26 27 Min.(V) 2.0 2.2 2.4 2.6 2.8 Max.(V) 2.2 2.4 2.6 2.8 3.0
• Tolerance of measurement of VF is ± 0.05V
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
3
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Order Code Table*
Luminous Flux (mlm) Min. 4400 5500 Max. 11000 11000 Color Bin RA RA Dominant Wavelength Min. (nm) 618 618 Color Bin RA RA Max. (nm) 630 630
Color Red Red
Kit Number CP42B-RKS-CL0P0AA4 CP42B-RKS-CM0P0AA4
Viewing Angle 120 120
Color Amber Amber
Kit Number CP42B-AKS-CM0Q0264 CP42B-AKS-CN0Q0354
Viewing Angle 120 120
Luminous Flux (mlm) Min. 5500 6600 Max. 13200 13200 Color Bin A2 A3
Dominant Wavelength Min. (nm) 584 587 Color Bin A6 A5 Max. (nm) 599 596
Notes: 1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes. Only one flux-bin code and one color-bin code will be shipped on each reel. And single flux-bin code,single color bin-codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
4
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Graphs
The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Mechanical Dimensions
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.
Notes
RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
6
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
7
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Package
Features:
• • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube.
R
xxx xxx
R
C OL OR LED LAMP
T YPE LXXXXX XXX-XXX LOT QT Y RANK Iv Vf Hu e X XX XX J OWAXXXXX -XX-XXX P CS
AX XXX XXX XXX X
Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
8
CLD-CT1133.001
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
很抱歉,暂时无法提供与“CP42B-RKS_2”相匹配的价格&库存,您可以联系我们找货
免费人工找货