CP43B-AGS

Cree® P4 LED CP43B-RGS/AGS Data Sheet This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical package design and high current capabilities. The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs green and blue LED materials, which allow designers to match the color of many lighting applications like vehicle signal lamps and amusement lighting. FEATURES • Size (mm): 7.6 x 7.6 • Color and Typical Dominant Wavelength (nm): Red (624) Amber (591) • Luminous Intensity (mcd) Red (2130 - 8200) Amber (2130 - 8200) • Lead-Free • RoHS Compliant APPLICATIONS • Channel Letter • Amusement 1 LD-CT1135.00 Data Sheet: C Subject to change without notice. www.cree.com/ledlamps 1 Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Red/Amber Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature Electrostatic Discharge Classification (MIL-STD-883E) Note2 Unit IF IFP VR PD Topr Tstg Tsol ESD 70 Note1 mA mA V mW °C °C 200 5 210 -40 ~ +100 -40 ~ +100 Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) Class 2 Note: 1. A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Forward Voltage Reverse Current Dominant Wavelength Color Red/Amber Red/Amber Red Amber Red Amber Red/Amber Red/Amber Symbol VF IR λD λD IV IV 2θ½H-H 2θ½V-V Condition IF = 70 mA VR = 5 V IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA IF = 70 mA Unit V μA nm nm mcd mcd deg deg 618 584 2130 2130 624 591 4500 5000 90 35 Minimum Typical 2.5 Maximum 3.0 100 630 599 Luminous Intensity 50% Power Angle Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Intensity Bin Limit (IF = 70 mA) Red Bin Code V0 W0 X0 Y0 Min.(mcd) 2130 3000 4180 5860 Max.(mcd) 3000 4180 5860 8200 Amber Bin Code V0 W0 X0 Y0 Min.(mcd) 2130 3000 4180 5860 Max.(mcd) 3000 4180 5860 8200 • Tolerance of measurement of luminous intensity is ±15% Color Bin Limit (IF = 70 mA) Red Bin Code RA Min.(nm) 618 Max.(nm) 630 Amber Bin Code A2 A3 A4 A5 A6 Min.(nm) 584 587 590 593 596 Max.(nm) 587 590 593 596 599 • Tolerance of measurement of dominant wavelength is ±1 nm VF Bin Limit (IF = 70 mA) Red Bin Code 23 24 25 26 27 Min.(V) 2.0 2.2 2.4 2.6 2.8 Max.(V) 2.2 2.4 2.6 2.8 3.0 Amber Bin Code 23 24 25 26 27 Min.(V) 2.0 2.2 2.4 2.6 2.8 Max.(V) 2.2 2.4 2.6 2.8 3.0 • Tolerance of measurement of VF is ± 0.05V Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Order Code Table* Luminous Intensity (mcd) Min. 2130 3000 4180 Max. 8200 8200 8200 Color Bin RA RA RA Dominant Wavelength Min. (nm) 618 618 618 Color Bin RA RA RA Max. (nm) 630 630 630 Color Red Red Red Kit Number CP43B-RGS-CV0Y0AA4 CP43B-RGS-CW0Y0AA4 CP43B-RGS-CX0Y0AA4 Viewing Angle 90 90 90 Color Amber Amber Amber Kit Number CP43B-AGS-CV0Y0264 CP43B-AGS-CW0Y0354 CP43B-AGS-CX0Y0354 Viewing Angle 90 90 90 Luminous Intensity (mcd) Min. 2130 3000 4180 Max. 8200 8200 8200 Color Bin A2 A3 A3 Dominant Wavelength Min. (nm) 584 587 587 Color Bin A6 A5 A5 Max. (nm) 599 596 596 Notes: 1. The above Kit numbers represent order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. And single intensity-bin code,single color-bin codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs                                                                                                           The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Mechanical Dimensions All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max.  Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 7 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Package Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXX XXX-XXX LOT QT Y RANK Iv Vf Hu e X XX XX J OWAXXXXX -XX-XXX P CS AX XXX XXX XXX X Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 8 CLD-CT1135.001 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps