LM1-PBL1-01-N1

Cree® SMD LED Model # LM-PBL-0-N Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in blue color with water-transparent lens Applications • • • • • Indicators Illuminations LCD Back Lights Automobile Applications RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 25 100 5 100 -40 ~ +100 -40 ~ +100 110 450 300 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Symbol VF IR IV λD 2θ½ Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA Unit V μA mcd nm deg 112 460 160 470 120 480 Minimum Typical 3.4 Maximum 4.0 10 LD-CT145.000 Data Sheet: C Reverse Current Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM-PBL-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-PBL1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. X3 X4 X5 X6 T1 or above S2 224 mcd S1 180 mcd R2 140 mcd R1 112 mcd 460 nm 465 nm 470 nm 475 nm 480 nm Luminous Intensity (IV) 280 mcd Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT45.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LM1-PBL1-01-N1 Rev. No. 03 Graphs raphs G If (mA) Vr(V) -50 -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 100.0 80.0 60.0 40.0 20.0 0.0 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 100% 75% 50% 25% Half Power WL=28nm Domi WL= 470nm 0% 300 400 500 600 WL(nm) 700 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT IF(mA) FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50 40 30 20 10 0 50% Power Angle : 0 Ie(%) 100% 80% 60% Rth j-s=300 C/W Rth j-a=450 C/W T ( C) 0 20 40 60 80 100 -90 -60 -30 0 30 60 90 40% 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 FAR FIELD PATTERN Items Prepared by Checked by Approved by FCN# Signatures Meiliping XieJH DavidLiu Date 2005-11-11 2005-11-11 2005-11-11 Rev.No 02 03 Date Revision History Change Description (min) 90mcd. 2005-07-27 Release. Change IV Rank from R1~S1 (min) 112mcd to Q2~S1 2005-11-11 Change IV Rank from Q2~S1(min)90mcd to R1~S2 (min) 112mcd. FCN20050365 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps  CLD-CT45.000 Document No. SPE/LM1-PBL1-01-N1 Rev. No. 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. ications splays ngs at Ta = 25°C ymbol IF IFP VR PD Topr Tstg Tj Rth JA Rth JS Absolute maximum Rating 25 100 5 100 -40 ~ + 100 -40 ~ + 100 +110 450 300 Unit mA mA V mW °C °C °C °C/W °C/W 2 uty =16mm ) cal Characteristics ( Ta = 25°C) Symbol VF Condition IF = 20mA Min. ----- Typ. 3.4 --- Max. 4.0 10 Unit V A Notes IR RoHS Compliance VR = 5V IV otherwise = 20mA materials in this product are below the maximum concentration values (also referred to as the IF restricted mcd 112 160 --threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. D The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or IF = 20mA IF = 20mA 460 --- 470 480 --- nm 2½ Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 120 deg Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT45.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PBL1-01-N1-00001 Description SMD 120 Blue 470nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT45.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps