LM1-PPG1-01-N1

Cree® SMD LED Model # LM-PPG-0-N Data Sheet 120-degree, 3.2 x 2.7 mm, SMT LED in green color with water-transparent lens Applications • • • • • Indicators Illuminations LCD Back Lights Automobile Applications RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 25 100 5 100 -40 ~ +100 -40 ~ +100 110 450 300 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Symbol VF IR IV λD 2θ½ Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA Unit V μA mcd nm deg 355 520 560 527 120 540 Minimum Typical 3.4 Maximum 4.0 10 LD-CT147.000 Data Sheet: C Reverse Current Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM-PPG-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-PPG1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. X7 X8 X9 X10 V2 or above V1 710 mcd U2 560 mcd U1 450 mcd T2 355 mcd 520 nm 525 nm 530 nm 535 nm 540 nm Luminous Intensity (IV) 900 mcd Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT47.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. SPE/LM1-PPG1-01-N1 Rev. No. 02 Graphs 100.0 80.0 60.0 40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 If (mA) -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 Half Power WL=38nm Domi WL= 527nm 100% 75% 50% 25% 0% 300 400 500 600 WL(nm) 700 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50 40 30 20 10 0 IF(mA) 50% Power Angle : Rth j-s=300 C/W 0 Ie(%) 100% 80% 60% Rth j-a=450 C/W 0 20 40 60 80 40% T ( C) 100 -90 -60 -30 0 30 60 90 FIG.6 FAR FIELD PATTERN 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Prepared by Checked by Approved by FCN# Signatures Meiliping XieJH DavidLiu Date 2005-07-27 2005-07-27 2005-07-27 Rev.No 02 Date Revision History Change Description 2005-07-27 Release. FCN20050260 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the CCopyright@2002 Cotco International Ltd. ree logo are registered trademarks of Cree, Inc. Data is subject to change without prior notice; please refer to COTCO Website for the latest version.  CLD-CT47.000 Document No. SPE/LM1-PPG1-01-N1 Rev. No. 02 Mechanical Dimensions Dimension Drawing All dimensions are in mm. ations lays gs at Ta = 25°C mbol IF IFP VR PD Topr Tstg Tj th JA th JS Absolute maximum Rating 25 100 5 100 -40 ~ + 100 -40 ~ + 100 +110 450 300 Unit mA mA V mW °C °C °C °C/W °C/W 2 uty =16mm ) al Characteristics ( Ta = 25°C) Symbol VF IR IV D Condition IF = 20mA Min. ----- Typ. 3.4 --- Max. 4.0 10 Unit V A mcd Notes VR = 5V IF = 20mA RoHS Compliance 355 560 --The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU DirecIF = 20mA 520 527 540 nm tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 20mA Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. 2½ --- 120 --- deg Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 2/4 CLD-CT47.000 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PPG1-01-N1-00001 Description SMD 120 Pure Green 527nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT47.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps