LM1-PRG1-01-N2

Cree® SMD LED Model # LM-PRG-0-N2 Data Sheet 120-degree, 3.2 x 2.8-mm, SMT LED in red and green colors with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Absolute Maximum Rating R 50 200 5 125 -40 ~ +100 -40 ~ +100 110 450 300 400 280 G 25 100 5 100 Items Forward Current Note 1 Symbol IF Note 2 Unit mA mA V mW °C °C °C °C/W °C/W Peak Forward Current Reverse Voltage Power Dissipation IFP VR PD Topr Tstg TJ RTHJA RTHJS Operation Temperature Storage Temperature Junction Temperature Junction/ambient Junction/solder point Notes: 1. 2. Pulse width ≤0.1 msec, duty ≤1/10. RTH test condition: mounted on PC Board FR 4 (pad size ≥16mm2) Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Wavelength at peak emission Dominant Wavelength Condition IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA VR = 5 V Symbol Values R 624 620~628 23 ½ 120 2.0 2.5 112 180 10 G 527 520~540 38 120 3.4 4.0 280 450 10 Unit nm nm nm deg V V mcd mcd A PEAK DOM LD-CT172.000 Data Sheet: C Spectral bandwidth at 50% IREL max Viewing Angle at 50% IV Forward Voltage ∆ 2 VF(avg) VF(max) IV(min) IV(avg) IR Luminous Intensity Reverse Current (max) Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM-PRG-0-N2 (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D ) bins shown. Orders for LM1-PRG1-01-N2 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength ( D ) values shown and specified are at IF = 20 mA. Luminous Intensity (IV) 280 mcd 224 mcd T1 or above S2 S1 180 mcd R2 140 mcd R1 112 mcd 620 nm Dominant Wavelength ( 628 nm D ) V1 or above U2 Luminous Intensity (IV) 710 mcd 560 mcd U1 450 mcd T2 355 mcd T1 280 mcd 520 nm Dominant Wavelength ( 540 nm D ) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT72.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. SPE/LM1-PRG1-01-N2 Rev. No. 01 Graphs 100.0 80.0 60.0 40.0 20.0 RED Vf(V) If (mA) 100.0 80.0 60.0 40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 GREEN If (mA) 0.0 1.8 2.0 2.2 2.4 2.6 2.8 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 RED GREEN -30.0 -40.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0 -30.0 -40.0 Ir(uA) -50.0 FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power R: G: Domi WL= 23nm WL=38nm 5.0 4.0 3.0 2.0 1.0 0.0 0.0 20.0 40.0 60.0 80.0 GREEN If(mA) 100.0 RED R: G: WL= 624nm WL=527nm I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% 0% 400 500 600 GREEN RED FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50% Power Angle : 0 100 80 IF(mA) Ie(%) 100% 80% 60% 40% Rth j-s=300 C/W 60 Rth j-a=450 C/W RED Rth j-s=280C/W GREEN Rth j-a=400C/W 0 20 40 60 80 40 20 0 T ( C) 100 -90 -60 -30 0 30 60 90 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 SPATIAL DISTRIBUTION. Items Prepared by Checked by  FCN# Signatures Maaiqiu XieJH Date 2006-12-05 2006-12-05 Rev.No Date Revision History Change Description Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps 2006-12-05 ACree logo are by pproved registered DavidLiuof Cree, Inc. trademarks CLD-CT72.000 FCN20060390 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Mechanical Dimensions Document No. SPE/LM1-PRG1-01-N2 Rev. No. 01 Dimension Drawing All dimensions are in mm. ations gs at Ta = 25 mbol IF IFP VR PD Topr Tstg Tj th JA th JS Absolute maximum Rating R 50 200 5 125 Unit mA mA V mW °C °C °C G 25 100 5 100 -40 ~ + 100 -40 ~ + 100 +110 450 300 400 280 °C/W °C/W 2 uty =16mm ) al Characteristics ( Ta = 25°C) Values R 624 620-628 23 G 527 520~540 38 Condition IF=20mA Symbol Unit nm nm nm peak dom NotesIF=20mA el max IF=20mA RoHS Compliance 120 120 Deg. IF=20mA The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or 2½ otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted VF(avg) for such substances, or are used in an exempted application, in accordance with EU Direc2.0 3.4 V tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment IF=20mA (RoHS), as amended through April 21, 2006. 2.5 VF(max) 4.0 V Vision Advisory Claim IF=20mA Iv(Min) 112 280 mcd Iv(Avg) 180 450 mcd Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. VR=5V IR 10 10 A Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT72.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PRG1-01-N2-00001 Description SMD 120 High Red and Pure Green, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT72.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps