LM1-PWR1-11-N1

Cree® SMD LED Model # LM-PWR--N Data Sheet 120-degree, 3.2 x 2.7 mm, power SMD in warm white color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 30 100 5 130 -40 ~ +100 -40 ~ +100 110 350 200 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Reverse Current Symbol VF IR IV CCT x y 2θ½ Condition IF = 30 mA VR = 5 V IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA IF = 30 mA deg Unit V μA mcd K 450 700 3200 0.426 0.407 120 Minimum Typical 3.6 Maximum 4.2 100 LD-CT153.000 Data Sheet: C Luminous Intensity Color Temperature Chromaticity Coordinates 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM-PWR--N (IF = 30 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LM1-PWR1-11-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA. D E F W1 or above V2 900 mcd V1 710 mcd U2 560 mcd U1 450 mcd Chromaticity Coordinates (x,y) Rank Chromaticity x Coordinates y 0.3541 0.3401 0.3610 0.3900 Luminous Intensity (IV) 1120 mcd D 0.4030 0.4250 0.3822 0.3580 0.3822 0.3580 0.4030 0.4250 E 0.4490 0.4530 0.4129 0.3725 0.4129 0.3725 0.4490 0.4530 F 0.5080 0.4720 0.4588 0.3838 Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the color coordinates is ±0.01. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging” document. 6. Please refer to the “Cree LED Lamp Reliability Test Parameters” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT53.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps CIE Chromaticity Diagram CIE Chromaticity Diagram 0.90 CIE 520 0.80 530 510 540 55 560 0.70 0.60 490 0.50 57 580 590 600 610 620 630 Y 0.40 E D F 0.30 480 0.20 470 0.10 46 0.00 0.00 0.10 0.20 0.30 X 0.40 0.50 0.60 0.70 0.80 4/5 3 CLD-CT53.000 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps REV.4 Document No. Rev. No. SPE/LM1-PWR1-11-N1 03 Graphshs Grap 100.0 80.0 60.0 40.0 20.0 0.0 3.0 Vf(V) 3.4 3.8 4.2 4.6 5.0 If (mA) Vr(V) -50 -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 2.5 2.0 1.5 1.0 0.5 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0 Half Power WL=150nm 100% 75% 50% 25% 0% 400 500 600 700 800 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 50 40 30 20 10 0 IF(mA) 50% Power Angle : Rth j-s=200 C/W 0 Ie(%) 100% 80% 60% Rth j-a=350 C/W T ( C) 0 20 40 60 80 100 -90 -60 -30 0 30 60 90 40% 20% 0% FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 FAR FIELD PATTERN. Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-04-26 2007-04-26 2007-04-26 Rev.No 02 03 Date Revision History Change Description 2005-08-17 Release. 2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01 FCN20070103 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps  CLD-CT53.000 Document No. Rev. No. SPE/LM1-PWR1-11-N1 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. ations gs at Ta = 25°C mbol IF IFP VR PD opr stg Absolute maximum Rating 30 100 5 130 -40 ~ + 100 -40 ~ + 100 +110 350 200 Unit mA mA V mW °C °C °C °C/W °C/W 2 Tj th JA th JS y =16mm ) al Characteristics ( Ta = 25°C) Symbol VF IR IV Condition IF = 30mA VR = 5V Min. ----450 --Typ. 3.6 --700 3200 Max. 4.2 100 ----Unit V A mcd K Notes IF = 30mA CCT RoHS Compliance IF = 30mA x y The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise = 30mA materials in this product are below the--maximum concentration values (also referred to as the IF restricted --0.426 --threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment --0.407 ----(RoHS), Ias amended through April 21, 2006. F = 30mA IF = 30mA 2 ½ Vision Advisory Claim --- 120 --- deg Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT53.000 2/5 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-PWR1-11-N1-00001 LM1-PWR1-11-N1-00002 Description SMD 120 Warm White, FULL RANK, Tape & Reel SMD 120 Warm White, E,F, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT53.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps