LM1-TYL1-01-N1

Cree® SMD LED Model # LM-TYL-0-N Data Sheet 120-degree, 3.2 x 2.7 mm, power SMT LED in amber color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 50 200 5 130 -40 ~ +100 -40 ~ +100 110 450 300 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Reverse Current Symbol VF IR IV λD 2θ½ Condition IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA Unit V μA mcd nm deg 280 584 300 591 120 596 Minimum Typical 2.3 Maximum 2.6 10 LD-CT184.000 Data Sheet: C Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM-TYL-0-N (IF = 20 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM1-THR1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 20 mA. X2 Luminous Intensity (IV) X3 X4 X5 U1 or above T2 355 mcd T1 280 mcd 584 nm 587 nm 590 nm 593 nm 596 nm 450 mcd Dominant Wavelength (λD) Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT84.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. Rev. No. SPE/LM1-TYL1-01-N1 02 Graphs Items Prepared by Checked by Approved by FCN# Signatures Meiliping XieJH DavidLiu Date 2005-08-18 2005-08-18 2005-08-18 Rev.No 02 Date Revision History Change Description 2005-08-18 Release. Change Graphs: Fig5. FCN20050260 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps  CLD-CT84.000 Document No. Rev. No. SPE/LM1-TYL1-01-N1 02 Mechanical Dimensions Dimension Drawing All dimensions are in mm. cations ings at Ta = 25°C mbol IF IFP R D opr stg Absolute maximum Rating 50 200 5 130 -40 ~ + 100 -40 ~ + 100 +110 450 Unit mA mA V mW °C °C °C °C/W Tj th JA th JS 300 °C/W 2 duty =16mm ) ical Characteristics ( Ta = 25°C) Symbol VF IR Condition IF = 20mA Min. ----- Typ. 2.3 --- Max. 2.6 10 Unit V A Notes VR = 5V RoHS Compliance IV The levelsF of 20mA I = environmentally sensitive, persistent biologically toxic (PBT), mcd persistent organic pollutants (POP), or 280 300 --- D otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment IF amended 584 591 596 nm (RoHS), as = 20mA through April 21, 2006. Vision Advisory Claim 2½ IF = 20mA --- 120 --- deg Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 4 CLD-CT84.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM1-TYL1-01-N1-00001 Description SMD 120 Amber 591nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT84.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps