LM2-THR1-F1-N1

Cree® SMD LED Model # LM2-THR-F-N Data Sheet 60-degree, 3.2 x 2.7 mm, power SMD LED in red color with water-transparent lens Applications • • • • • • Traffic Lights Backlighting (such as LCDs, switches, keys, displays, illuminated advertising) Interior and Exterior Automotive Lighting (such as dashboards, backup and brake lights) Substitution for Micro Incandescent Lamps Marker Lights (such as steps and exits) Signal and Symbol Luminaires Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 70 200 5 225 -40 ~ +100 -40 ~ +100 110 300 150 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥16 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Symbol VF IR ΦV IV λD 2θ½ Condition IF = 50 mA VR = 5 V IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA Unit V μA mlm mcd nm deg 1400 620 2550 2200 628 60 635 Minimum Typical 2.5 Maximum 3.2 10 LD-CT186.000 Data Sheet: C Forward Voltage Reverse Current Luminous Flux Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LM2-THR-F-N (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LM2-THR1-F1-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA. 3550 mcd Luminous Intensity (IV) Y2 or above Y1 2800 mcd X2 2240 mcd X1 1800 mcd W2 1400 mcd 620 nm Dominant Wavelength (λD) 635 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of the dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT86.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. Rev. No. SPE/LM2-THR1-F1-N1 02 Graphs 100.0 80.0 60.0 40.0 20.0 0.0 2.0 Vf(V) 2.2 2.4 2.6 2.8 3.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. If (mA) -60 Vr(V) -50 -40 -30 -20 -10 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 2.5 2.0 1.5 1.0 0.5 0.0 If(mA) 0.0 20.0 40.0 60.0 80.0 100.0 FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT. 100% 75% 50% 25% Half Power WL=23nm Domi WL= 628nm I (RELATIVE LUMINOUS INTENSITY) 0% 400 500 600 700 WL(nm) 800 FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 100 80 60 40 20 0 IF(mA) Rth j-s=150 C/W 50 60 50% Power Angle : 40 30 20 10 0 1.0 0.8 Rth j-a=300 C/W T ( C) 0 20 40 60 80 100 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0 20 40 60 80 100 110 70 80 90 100 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C FIG.6 SPATIAL DISTRCBUTION. Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-03-16 2007-03-16 2007-03-16 Rev.No 02 Date Revision History Change Description 2007-03-16 Cancel cover page Description:60 Degree FCN20070080 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 CotcoAll rights reserved.Ltd. information in this document is subject to change without notice. Cree and the Copyright © 2007 Cree, Inc. International The Cree logo are registered trademarks of Cree, Inc.  CLD-CT86.000 Document No. Rev. No. SPE/LM2-THR1-F1-N1 02 Mechanical Dimensions Dimension Drawing itches,Keys,Displays,Illuminated Automotive Lighting(e.g. Dashboard Lights) Incandescent Lamps teps,Exit Ways,Etc.) uminaire All dimensions are in mm. ings at Ta = 25°C Symbol IF IFP VR PD Topr Tstg Tj Rth JA Rth JS Absolute maximum Rating 70 200 5 225 -40 ~ + 100 -40 ~ + 100 +110 300 150 Unit mA mA V mW °C °C °C °C /W °C /W 2 uty =16mm ) tical Characteristics ( Ta = 25°C) Symbol VF IR Condition IF =50mA VR = 5V Min. ------Typ. 2.5 --2550 Max. 3.2 10 --Unit V A mlm Notes VRoHS IF = 50mA Compliance IVThe levelsIFof 50mA = environmentally sensitive, persistent biologically toxic (PBT), mcd 1400 2200 --persistent organic pollutants (POP), or 2½ otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold Ilimits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc620 628 635 nm F =50mA D tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. IF = 50mA --- 60 --- deg Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT86.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LM2-THR1-F1-N1-00001 Description SMD 60 High Red 628nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT86.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps