LP6-PBL1-03-N1

Cree® SMD LED Model # LP6-PBL-03-N Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in blue color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 3 x 50 3 x 100 5 3 x 255 -40 ~ +100 -40 ~ +100 110 3 x 300 3 x 160 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥40 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Reverse Current Symbol VF IR θV IV λD 2θ½ Condition IF = 3 x 50 mA VR = 5 V IF = 3 x 50 mA IF = 3 x 50 mA IF = 50 mA IF = 3 x 50 mA Unit V μA mlm mcd nm deg 560 460 2400 850 470 120 480 Minimum Typical 4.0 Maximum 5.1 10 LD-CT158.000 Data Sheet: C Luminous Flux Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LP6-PBL-03-N (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordiates (x,y) bins shown. Orders for LP6-PBL1-03-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and chromaticity coordinates (x,y) values shown and specified are at IF = 3 x 50 mA. Luminous Intensity (IV) 1400 mcd (3.5 lm) 1120 mcd (3.0 lm) W2 or above W1 (J) V2 (H) 900 mcd (2.5 lm) V1 (G) 710 mcd (2.0 lm) U2 (F) 560 mcd (1.5 lm) 460 nm Dominant Wavelength (λD) 480 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT58.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Document No. SPE/LP6-PBL1-03-N1 Rev. No. 04 If (mA) -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=28nm Domi WL= 470nm (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% If(mA) 20.0 40.0 60.0 80.0 100.0 Graphs 100.0 80.0 60.0 40.0 20.0 0.0 3.2 3.6 4.0 4.4 4.8 5.2 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. -50.0 RELATIVE LUMINOUS INTENSITY 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0% 300 400 500 600 700 WL(nm) 800 FIG.3 FORWARD CURRENT. FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 100 80 60 40 20 0 IF(mA) 50% Power Angle : Rth JA = 150 C/W 0 Ie(%) 100% 80% 60% Rth JS = 300 C/W 40% T ( C) 20% -90 -60 -30 0 30 60 90 0% 60 80 100 FIG.6 SPATIAL DISTRIBUTION. 0 20 40 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-01-10 2007-01-10 2007-01-10 Rev.No 02 03 04 Date 2006-12-15 Release. Revision History Change Description 2006-12-26 Correct is at X1 bin or above to is at U2 bin or above. 2007-01-10 Change VF(typ)4.5 to 4.0, Change Graphs. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps FCN20070014 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo Copyright@2002 Cotco International Ltd. are registered trademarks of Cree, Inc. Data is subject to change without prior notice; please refer to COTCO Website for the latest version. CLD-CT58.000 3 Rev. No. Dimension Drawing Mechanical Dimensions 04 All dimensions are in mm. C te maximum ating Unit mA mA V W °C °C °C °C /W x 50 x 100 5 X 255 ~ + 100 ~ + 100 +110 x 300 x 160 °C /W h test condition: Mounted on PC Board FR 4(pad size>=40mm2) tics ( Ta = 25°C) Notes ondition Compliance in. M RoHS Typ. Max. Unit o 0mA values (also referred to as the --4.0 5.1 3 x 5therwise restricted materials in this product are below the maximum concentrationV The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or VR = 5V threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. --- --- 10 --- A mlm Vision Advisory Claim 3 x 50mA 3 x 50mA F  = 50mA Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. --- 2400 850 470 560 CLD-CT58.000 --480 mcd nm Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 460 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PBL1-03-N1-00001 Description SMD 120 Blue 470nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT58.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps