LP6-PPG1-03-N1

Cree® SMD LED Model # LP6-PPG-03-N Data Sheet 120-degree, 6.0 x 5.0 mm, SMT LED in green color with water-transparent lens Applications • • • • Indicators Illuminations LCD Back Lights Automobile Applications Absolute Maximum Ratings (TA = 25°C) Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Junction Temperature Junction/Ambient Note 2 Note 1 Symbol IF IFP VR PD Topr Tstg TJ RTHJA RTHJS Absolute Maximum Rating 3 x 50 3 x 100 5 3 x 255 -40 ~ +100 -40 ~ +100 110 3 x 300 3 x 160 Unit mA mA V mW °C °C °C °C/W °C/W Junction/Solder Point 1. 2. Notes: Pulse width ≤0.1 msec, duty ≤1/10. Rth test condition: mounted on PCB FR4 (pad size ≥40 mm2) Typical Electrical & Optical Characteristics (TA = 25°C ) Characteristics Forward Voltage Reverse Current Symbol VF IR θV IV λD 2θ½ Condition IF = 3 x 50 mA VR = 5 V IF = 3 x 50 mA IF = 3 x 50 mA IF = 50 mA IF = 3 x 50 mA Unit V μA mlm mcd nm deg 1800 514 7000 3500 524 120 534 Minimum Typical 4.0 Maximum 5.1 10 LD-CT159.000 Data Sheet: C Luminous Flux Luminous Intensity Dominant Wavelength 50% Power Angle Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LP6-PPG-03-N (IF = 3 x 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LP6-PPG1-03-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 3 x 50 mA. 4500 mcd (15 lm) Luminous Intensity (IV) 3550 mcd (10 lm) Z1 or above Y2 (R) Y1 (P) 2800 mcd (8 lm) X2 (N) 2240 mcd (6 lm) X1 (M) 1800 mcd (5 lm) 514 nm Dominant Wavelength (λD) 534 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT59.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Graphs Document No. Rev. No. SPE/LP6-PPG1-03-N1 03 Graphs 100.0 80.0 60.0 40.0 20.0 0.0 3.2 3.6 4.0 4.4 4.8 5.2 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. Vf(V) Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. Half Power WL=38nm Domi WL= 524nm (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% If(mA) 20.0 40.0 60.0 80.0 100.0 If (mA) -50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 -50.0 RELATIVE LUMINOUS INTENSITY 2.5 2.0 1.5 1.0 0.5 0.0 0.0 0% 300 400 500 600 700 WL(nm) 800 FIG.3 FORWARD CURRENT. FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH. 100 80 60 40 20 0 IF(mA) 50% Power Angle : Rth JA = 150 C/W 0 Ie(%) 100% 80% 60% R th JS = 300 C/W 40% T ( C) 20% -90 -60 -30 0 30 60 90 0% 60 80 100 FIG.6 SPATIAL DISTRIBUTION. 0 20 40 FIG.5 MAXIMUM FORWARD DC CURRENT VS TEMPERATURE. DERATING BASED ON Tjmax=110 C Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-01-11 2007-01-11 2007-01-11 Rev.No 02 03 Date 2006-12-11 Revision History Change Description Release. Change Iv rank: from X1-Y1 to X1-Y2 2007-01-10 Change VF(typ)4.5 to 4.0 ,Change Graphs. FCN20070014 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 3 CLD-CT59.000 Document No. Rev. No. SPE/LP6-PPG1-03-N1 03 Mechanical Dimensions Dimension Drawing All dimensions are in mm. cations ings at Ta = 25°C ymbol IF IFP VR PD Topr Tstg Tj Rth JA Rth JS ESD Absolute maximum Rating 3 x 50 3x100 5 3x255 -40 ~ + 100 -40 ~ + 100 +110 3 x 300 3 x 160 Class 1 2 Unit mA mA V mW °C °C °C °C /W °C /W ty =40mm ) tical Characteristics ( Ta = 25°C) Symbol VF Condition IF = 3 x 50mA Min. ------Typ. 4.0 --7000 Max. 5.1 10 --Unit V A mlm IR NotesVR = 5V V RoHSIF = 3 x 50mA Compliance IV The levels x 50mA IF = 3 of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or mcd 1800 3500 --D otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc514 524 534 nm IF = 3 x 50mA tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. 2½ IF = 3 x 50mA --- 120 --- deg Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT59.000 2/4 Format #: COTCO-D-074 REV.4 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PPG1-03-N1-00001 Description SMD 120 Pure Green 524nm, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 5 CLD-CT59.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps