LP6-PPP1-01-N1

Cree® SMD LED Model # LP6-PPP-0-N Data Sheet 120-degree, 6.0 x 5.0-mm, SMT LED in full color with water-transparent lens Applications • • • • Indoor and Outdoor Displays Backlighting Camera Flash RGB Full-Color Displays Absolute Maximum Ratings (TA = 25°C) Absolute Maximum Rating R 80 200 5 240 G 80 100 5 410 -40 ~ +100 -40 ~ +100 +110 250 500 150 150 110 210 300 130 160 110 210 300 130 160 B 80 100 5 410 Items Forward Current Note 1 Symbol IF Note 2 Unit mA mA V mW °C °C °C °C/W °C/W °C/W °C/W Peak Forward Current Reverse Voltage Power Dissipation IFP VR PD Topr Tstg TJ Note 3 Operation Temperature Storage Temperature Junction Temperature Junction/ambient 1 chip on RTHJA RTHJA RTHJS RTHJS Junction/ambient 3 chips on Note 3 Junction/solder point 1 chip on Junction/solder point 3 chips on Notes: 1. 2. 3. Single-color light. Pulse width ≤0.1 msec, duty ≤1/10. RTH test condition: mounted on PC Board FR 4 (pad size ≥40 mm2) Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA IF = 50 mA VR = 5 V Symbol λPEAK λDOM Δλ 2θ½ VF(avg) VF(max) IV(min) IV(avg) IR Values R 620 610~625 24 120 2.0 2.5 710 1000 10 G 521 514~534 38 120 4.0 5.1 710 900 10 B 468 460~480 28 120 4.0 5.1 280 390 10 Unit nm nm nm deg V V mcd mcd μA LD-CT160.000 Data Sheet: C Wavelength at peak emission Dominant Wavelength Spectral bandwidth at 50% IREL max Viewing Angle at 50% IV Forward Voltage Luminous Intensity Reverse Current (max) Subject to change without notice. www.cree.com/ledlamps  Standard Bins for LP6-PPP-0-N (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown. Orders for LP6-PPP1-01-N1 may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (λD) values shown and specified are at IF = 50 mA. Luminous Intensity (IV) 1800 mcd 1120 mcd X or above W V 710 mcd 610 nm Dominant Wavelength 625 nm Luminous Intensity (IV) 1800 mcd 1120 mcd X or above W V 710 mcd 514 nm Dominant Wavelength 534 nm Luminous Intensity (IV) 710 mcd 450 mcd V or above U T 280 mcd 460 nm Dominant Wavelength 480 nm Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Tolerance of measurement of luminous intensity is ±10%. 3. Tolerance of measurement of dominant wavelength is ±1 nm. 4. Tolerance of measurement of VF is ±0.05 V. 5. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document. 6. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 7. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. 2 CLD-CT60.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Graphs Graphs Document No. SPE/LP6-PPP1-01-N1 Rev. No. 02 100.0 80.0 60.0 40.0 20.0 If (mA) 100.0 GREEN If (mA) 80.0 60.0 BLUE 40.0 20.0 Vf(V) 5.0 RED 0.0 3.0 3.4 3.8 4.2 4.6 0.0 Vf(V) 1.6 1.8 2.0 2.2 2.4 2.6 F ORWARD CURRENT VS. FORWARD VOLTAGE. FIG.1 FORWARD CURRENT VS. F ORWARD VOLTAGE. 4/6 Format #: COTCO-D-074 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT60.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps REV.4 Graphs Graphs Document No. SPE/LP6-PPP1-01-N1 Rev. No. 02 5/6 Format #: COTCO-D-074 REV.4 Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT60.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Document No. SPE/LP6-PPP1-01-N1 Rev. No. 02 Graphs CIE Graph the color coordinates of the mixed light can be expected within the area of the color triangle marked a). The color coordinates of the mixed light can be expected within the area of the color triangle marked “a)”. the achromatic pointpoint (x=0.33, is marked“+” marked “+”. The achromatic (x=0.33,y=0.33) y=0.33) is Items Prepared by Checked by Approved by FCN# Signatures WangFJ XieJH DavidLiu Date 2007-03-22 2007-03-22 2007-03-22 Rev.No 02 Date Revision History Change Description 2007-03-22 Delete WD rank. FCN20070086 Data is subject to change without prior notice; please refer to COTCO Website for the latest version. Copyright@2002 Cotco International Ltd. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps 5 CLD-CT60.000 6/6 Format #: COTCO-D-074 REV.4 Document No. SPE/LP6-PPP1-01-N1 Rev. No. 02 Dimension Draw ing Mechanical Dimensions All dimensions are in mm. °C bsolute maximum Rating Unit mA mA V mW G 80 0 100 5 0 410 -40 ~ + 100 -40 ~ + 100 0 0 0 0 0 110 210 300 130 160 3 B 80 100 5 410 °C °C 110 210 300 130 160 °C °C/W °C/W °C/W °C/W 2 uty=40mm ) istics(Ta = 25°C) Notes dition RoHS Symbol Compliance Values Unit 0mA 0mA 0mA 0mA R G B The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc620 521 468 nm peak tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim dom 610-625 514-534 460~480 nm Users should be cautioned 24 to stare at the light of this LED product. The bright light can damage the eye. not 38 28 nm 2½ V 120 2.0 120 4.0 5.1 120 4.0 5.1 Deg. V V Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps 0mA Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the F(avg) Cree logo are registered trademarks of Cree, Inc. 6 CLD-CT60.000 2.5 VF(max) Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Standard/Custom 0: Standard C: Custom VF 0: Full forward voltage distribution 1~9, A~Z . . . : special request * Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV 1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . : special request * Packing type Product P/N 0: Standard = tape pack 1~9, A~Z . . . : special request * * Contact your Cree sales representative for ordering information. Standard Available Kits* Kit Number LP6-PPP1-01-N1-00001 Description SMD 120 Full Color, FULL RANK, Tape & Reel * Please contact your Cree representative about the availability of non-standard kits. Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.  CLD-CT60.000 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps