MLEAWT-A1-0000-0002E7

C LD DS-30 REV 1 PRODUCT FAMILY DATA SHEET Cree XLamp ML-E LEDs ® ® PRODUCT DESCRIPTION The Cree XLamp ML-E LED brings lighting-class reliability and performance to 1/2-watt LEDs. The XLamp ML-E expands Cree’s lighting-class leadership to linear and distributed lighting applications. With XLamp lighting-class reliability, a wide viewing angle, uniform light output, and industry-leading chromaticity binning in a 3.5-mm X 3.5-mm package, the XLamp ML-E LED continues Cree’s history of segment-focused product innovation in LEDs for lighting applications. The XLamp ML-E LED brings high performance and a smooth look to a wide range of lighting applications, including linear lighting, LED light bulbs, fluorescent retrofits WWW. CREE.COM/XLAMP and retail-display lighting. FEATURES • Available in white (2,600 K to 8,300 K CCT) • ANSI-compatible sub-bins • Maximum drive current: 500 mA • 120° viewing angle, uniform chromaticity profile • Electrically neutral thermal path • RoHS and REACH-compliant • Unlimited floor life at ≤ 30°C/85% RH TABLE OF CONTENTS Flux Characteristics (TJ = 25°C) . . . . . . 2 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Relative Spectral Power Distribution. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Relative Flux vs. Junction Temperature (IF = 150 mA). . . . . . . . 3 Electrical Characteristics (TJ = 25°C). . . . . . . . . . . . . . . . . . . . . . . . . . 4 Relative Flux vs. Current TJ = 25°C). . . . . . . . . . . . . . . . . . . . . . . . . . 4 Thermal Design. . . . . . . . . . . . . . . . . . . . . . . . . 5 Typical Spatial Distribution. . . . . . . . . . . . 5 Reflow Soldering Characteristics. . . . . . 6 Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Mechanical Dimensions (TA = 25°C).. 8 Tape and Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLAMP ML-E LEDS FLUX CHARACTERISTICS (TJ = 25°C) The following table provides several base order codes for XLamp ML-E LEDs. It is important to note that the base order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the order-code nomenclature, please consult the XLamp ML-E LED Binning and Labeling document. Base Order Codes Min Luminous Flux (lm) @ 150 mA Group M3 N2 M2 M3 K3 M2 Flux (lm) 45.7 51.7 39.8 45.7 35.2 39.8 MLEAWT-A1-0000-000351 MLEAWT-A1-0000-000451 MLEAWT-A1-0000-0002E5 MLEAWT-A1-0000-0003E5 MLEAWT-A1-0000-0001E7 MLEAWT-A1-0000-0002E7 Color CCT Range Min. Max. 8,300K Order Code Cool White 5.000 K 3,700 K Warm White 2,800 K 4,300 K 3,200 K Notes: • Cree maintains a tolerance of +/- 7% on flux measurements. • Typical CRI for Cool White (4,300 K – 8,300 K CCT) is 75. • Typical CRI for Warm White (2,600 K – 4,300 K CCT) is 80. CHARACTERISTICS Characteristics Thermal resistance, junction to solder point Viewing angle (FWHM) Temperature coefficient of voltage ESD classification (HBM per Mil-Std-883D) DC forward current Reverse voltage Forward voltage (@ 150 mA) LED junction temperature mA V V °C 3.2 Unit °C/W degrees mV/°C Minimum Typical 11 120 -3 Class 2 150 500 5 3.4 150 Maximum Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 2 XLAMP ML-E LEDS RELATIVE Relative POWER DISTRIBUTION SPECTRAL Spectral Power 100 ML-E - OK Relative Radiant Power (%) 80 60 5000K - 8300K CCT 3500K - 5000K CCT 40 2600K - 3500K CCT 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 150 MA) 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 45 65 85 105 125 145 Junction Temperature (ºC) Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 3 XLAMP ML-E LEDS ELECTRICAL CHARACTERISTICS (TJ = 25°C) 500 450 Forward Current (mA) 400 350 300 250 200 150 100 50 0 2.50 2.75 3.00 3.25 3.50 3.75 4.00 Forward Voltage (V) RELATIVE FLUX VS. CURRENT (TJ = 25°C) 300% Relative Luminous Flux (%) 250% 200% 150% 100% 50% 0% 0 100 200 300 400 500 Forward Current (mA) Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 4 XLAMP ML-E LEDS THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. 600 500 Maximum Current (mA) 400 300 200 Rj-a Rj-a Rj-a Rj-a = = = = 20°C/W 30°C/W 40°C/W 50°C/W 100 0 0 25 50 75 100 125 150 Ambient Temperature (ºC) TYPICAL SPATIAL DISTRIBUTION 120 Relative Luminous Intensity (%) 100 80 60 40 20 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angle (º) Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 5 XLAMP ML-E LEDS REFLOW SOLDERING CHARACTERISTICS In testing, Cree has found XLamp ML-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5°C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature Lead-Based Solder 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds 215°C 10-30 seconds 6°C/second max. 6 minutes max. Lead-Free Solder 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260°C 20-40 seconds 6°C/second max 8 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. Note: While the high reflow temperatures (above) have been approved, Cree’s best practice guideline for reflow is to use as low a temperature as possible during the reflow soldering process for these LEDs. Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 6 XLAMP ML-E LEDS NOTES Moisture Sensitivity In testing, Cree has found XLamp ML-E LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 7 XLAMP ML-E LEDS MECHANICAL DIMENSIONS (TA = 25°C) MX3535 Pad Layout are ±.13 mm unless otherwise indicated. All measurements Top View Top View Bottom View Side View Recommended FR4 Solder Pad Recommended MCPCB Solder Pad Alternative Solder Pad Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 8 4.0±.1 1.75±.10 TAPE AND REEL +.3 12.0 .0 8.0±.1 1.5±.1 XLAMP ML-E LEDS 2.5±.1 Cathode Side All dimensions in mm. Anode Side User Feed (denoted by + and circle) Direction END START User Feed Direction END START Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 13mm 7" Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 9 XLAMP ML-E LEDS PACKAGING All dimensions in mm. Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label with CREE Bin Code Cree Bin & Barcode Label Code, Qty, Lot # Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO Code, Qty, Lot# # Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Copyright © 2010, 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. 10