C LD-DS36 Rev 2
Product family data sheet/ biNNiNG aNd labeliNG documeNt
cree® Xlamp® mt-G easyWhite™ leds
Product descriPtioN
The XLamp MT-G easyWhite LeD maximizes lumen density, eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver consistent color and high efficacy light output in a new, compact, multi-die package. XLamp MT-G easyWhite LeDs can reduce LeD-to-LeD color variation to within a 2-step MacAdam ellipse, 94% smaller than the total area of the corresponding ANSI C78.377 color region. The XLamp MT-G easyWhite LeD is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. example applications include: LED retrofit bulbs, commercial/retail WWW.CRee.COM/XLAMP display spotlights, and other indoor general illumination applications.
features
• Cree easyWhite color
table of coNteNts
•
•
label Product Characteristics ............... 2 with cree bin code, Qty, lotCharacteristics, Standard # ...................................... Flux temperatures 10 Order Codes and Bins ................ 2 Wide Range of operating power label with customer order code, .. 10 Relative Spectral Power - up to 25W Qty, reel id, Po# .......................... Distribution............................... 3 10 85° C binning and Relative Luminous Flux vs Junction characterization Temperature ............................. 4 Two voltage options: 6v, 36v Low effective thermal resistance: 1.5° C/W electrical Characteristics ............. 4 Relative Luminous Flux vs Current .................................... 5 Typical Spatial Distribution .......... 6 Performance Groups – Brightness ................................ 7 Performance Groups – Chromaticity ............................. 7 Cree easyWhite Color Temperatures ........................... 8 Bin and Order Code Format ......... 9 Standard Order Codes and Bins ... 9 Notes ......................................10
• •
• • •
High lumen density Wide viewing angle: 120° Minimum 80 CRI at 2700 K and 3000 K CCT
•
electrically neutral thermal path
aPPlicatioNs
• • • MR, PAR and other directional retrofit bulbs Commercial/residential directional lighting General indoor/outdoor illumination
Reflow Soldering Characteristics .11 Mechanical Dimensions..............12 Tape and Reel ..........................13 Packaging ................................14
Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo and XLamp are registered trademarks and easyWhite is a trademark of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp
x lamp mT-G EasyWhiTE lEDs
Product characteristics
characteristics viewing Angle (FWHM) ESD Classification (HBM per Mil-Std-883D) effective Thermal Resistance, Junction to Solder-point LeD Junction Temperatures DC Forward Current (6v) DC Forward Current (36v) Forward voltage (6v, 1100 mA, 85° C) Forward voltage (36v, 185 mA, 85° C) Temperature Coefficient of Voltage (6V) Temperature Coefficient of Voltage (36V) Reverse voltage (6v) Reverse Current (6v, 36v) Moisture Sensitivity Level Rating (MSL) °C/W °C mA mA v v mv/°C mv/°C v mA MSL 1 1100 185 5.6 33.5 -4.5 -27 -5 0.1 unit degrees minimum typical 120 Class 2 1.5 150 4000 700 6.7 40.2 maximum
fluX characteristics, staNdard order codes aNd biNs, 6 Volt mt-G (1100 ma, tj =85° c)
The following table provides several base order codes for 6 volt XLamp MT-G easyWhite LeDs. For a complete description of the order-code nomenclature, please reference page 9 of this document.
base order codes min luminous flux (lm) (tj =85° c) Group F0 4,000 K G0 H0 e0 3,500 K Standard CRI easyWhite 3,000 K F0 G0 e0 F0 G0 D0 2,700 K e0 F0 flux (lm) 480 520 560 440 480 520 440 480 520 400 440 480 27H 30H 35H 40H
color
cct range
2-step order code chromaticity region MTGeZW-00-0000-0B00F040H MTGeZW-00-0000-0B00G040H MTGeZW-00-0000-0B00H040H MTGeZW-00-0000-0B00e035H MTGeZW-00-0000-0B00F035H MTGeZW-00-0000-0B00G035H MTGeZW-00-0000-0B00e030H MTGeZW-00-0000-0B00F030H MTGeZW-00-0000-0B00G030H MTGeZW-00-0000-0B00D027H MTGeZW-00-0000-0B00e027H MTGeZW-00-0000-0B00F027H 27F 30F 35F 40F
4-step order code chromaticity region MTGeZW-00-0000-0B00F040F MTGeZW-00-0000-0B00G040F MTGeZW-00-0000-0B00H040F MTGeZW-00-0000-0B00e035F MTGeZW-00-0000-0B00F035F MTGeZW-00-0000-0B00G035F MTGeZW-00-0000-0B00e030F MTGeZW-00-0000-0B00F030F MTGeZW-00-0000-0B00G030F MTGeZW-00-0000-0B00D027F MTGeZW-00-0000-0B00e027F MTGeZW-00-0000-0B00F027F
Notes: • Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements • Minimum CRI for easyWhite color temperatures 27F, 27H, 30F, 30H is 80 • Minimum CRI for easyWhite color temperatures 35F, 35H, 40F, 40H is 77 • Typical CRI for easyWhite color temperatures 35F, 35H, 40F, 40H is 80
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
2
x lamp mT-G EasyWhiTE lEDs
fluX characteristics, staNdard order codes aNd biNs, 36 Volt mt-G (185 ma, tj =85° c)
The following table provides several base order codes for 36 volt XLamp MT-G easyWhite LeDs. For a complete description of the order-code nomenclature, please reference page 9 of this document.
base order codes min luminous flux (lm) (tj =85° c) Group F0 4,000 K G0 H0 e0 3,500 K Standard CRI easyWhite 3,000 K F0 G0 e0 F0 G0 D0 2,700 K e0 F0 flux (lm) 480 520 560 440 480 520 440 480 520 400 440 480 27H 30H 35H 40H
color
cct range
2-step order code chromaticity region MTGeZW-00-0000-0N00F040H MTGeZW-00-0000-0N00G040H MTGeZW-00-0000-0N00H040H MTGeZW-00-0000-0N00e035H MTGeZW-00-0000-0N00F035H MTGeZW-00-0000-0N00G035H MTGeZW-00-0000-0N00e030H MTGeZW-00-0000-0N00F030H MTGeZW-00-0000-0N00G030H MTGeZW-00-0000-0N00D027H MTGeZW-00-0000-0N00e027H MTGeZW-00-0000-0N00F027H 27F 30F 35F 40F
4-step order code chromaticity region MTGeZW-00-0000-0N00F040F MTGeZW-00-0000-0N00G040F MTGeZW-00-0000-0N00H040F MTGeZW-00-0000-0N00e035F MTGeZW-00-0000-0N00F035F MTGeZW-00-0000-0N00G035F MTGeZW-00-0000-0N00e030F MTGeZW-00-0000-0N00F030F MTGeZW-00-0000-0N00G030F MTGeZW-00-0000-0N00D027F MTGeZW-00-0000-0N00e027F MTGeZW-00-0000-0N00F027F
Notes: • Cree maintains a tolerance of ±7% on flux and power measurements and ±2 on CRI measurements • Minimum CRI for easyWhite color temperatures 27F, 27H, 30F, 30H is 80 • Minimum CRI for easyWhite color temperatures 35F, 35H, 40F, 40H is 77 The CRI for easyWhite color temperatures 35F, each 40F, the is 80 • Typicalfollowing graph represents typical spectral output of35H, die of 40HMT-G
Relative Spectral Power Distribution White
This is XR-E data, and MC-E Data…
relatiVe sPectral PoWer distributioN (6V, 1100 ma; 36V, 185 ma; tJ=85°c; 3000K cct)
The following graph represents typical spectral output of the XLamp MT-G easyWhite LeD.
100
Relative Spectral Power (%)
80
60
40
20
0
400 450 500 550 600 650 700 750
Wavelength (nm)
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
3
x lamp mT-G EasyWhiTE lEDs
The following graph represents typical performance of each LED die in the XLamp MT-G (6V, 1100 ma; 36V, 185 ma) relatiVe lumiNous fluX Vs JuNctioN temPerature
Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V)
The following graph represents typical performance of the XLamp MT-G easyWhite LeD.
120%
Relative Luminous Flux
100%
80%
60%
40%
20%
0% 20 40 60 80 100 120 140
Junction Temperature (ºC)
Electrical Characteristics (Tsp = 85ºC) electrical characteristics (t = 85°c)
J
6V
4000
3500
3000
Current (mA)
2500
2000
MT-G 6V
1500
1000
500
0 5 5.25 5.5 5.75 6 6.25 Forward Voltage V
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
4
36V
x lamp mT-G EasyWhiTE lEDs
700
600
500
Current (mA)
400
300
MT-G 36V
200
100
0
31.00 32.00 33.00 34.00 35.00 36.00 37.00 38.00 Forward Voltage V
Relative Intensity vs. Current (Tsp = 85ºC)
relatiVe lumiNous fluX Vs curreNt (tJ = 85°c)
300%
Relative Luminous Flux (%)
250%
200%
150%
MT-G 6V
100%
50%
0%
0
500
1000
1500
2000
2500
3000
3500
4000
Forward Current, Pulsed (mA)
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
5
@ 36V)
x lamp mT-G EasyWhiTE lEDs
300%
Relative Luminous Flux (%)
250%
200%
150%
MT-G 36V
100%
50%
0% 0 100 200 300 400 500 600 700
Forward Current, Pulsed (mA)
tyPical sPatial distributioN Spatial Distribution
The following graph represents typical performance of the XLamp MT-G easyWhite LeD.
100
Relative Luminous Intensity (%)
80
60
40
20
0 -90 -60 -30 0 30 60 90
Angle (º)
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
6
x lamp mT-G EasyWhiTE lEDs
PerformaNce GrouPs – briGhtNess (tJ = 85°c)
XLamp MT-G easyWhite LeDs are tested for luminosity and placed into one of the following bins.
Group code D0 e0 F0 G0 H0 J0
min. luminous flux @ 1100 ma, 6V; @185 ma, 36V 400 440 480 520 560 600
max. luminous flux @ 1100 ma, 6V; @185 ma, 36V 440 480 520 560 600 650
PerformaNce GrouPs – chromaticity (tJ = 85°c)
XLamp MT-G EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates.
easyWhite color temperatures – 4-step code cct x 0.3744 40F 4000 K 0.3782 0.3912 0.3863 0.3981 35F 3500 K 0.4040 0.4186 0.4116 0.4242 30F 3000 K 0.4322 0.4449 0.4359 0.4475 27F 2700 K 0.4573 0.4695 0.4589 y 0.3685 0.3837 0.3917 0.3758 0.3800 0.3966 0.4037 0.3865 0.3919 0.4096 0.4141 0.3960 0.3994 0.4178 0.4207 0.4021
easyWhite color temperatures – 2-step code cct x 0.3784 40H 4000 K 0.3804 0.3867 0.3844 0.4030 35H 3500 K 0.4061 0.4132 0.4099 0.4291 30H 3000 K 0.4333 0.4395 0.4351 0.4528 27H 2700 K 0.4578 0.4638 0.4586 y 0.3741 0.3818 0.3857 0.3778 0.3857 0.3941 0.3976 0.3890 0.3973 0.4062 0.4084 0.3994 0.4046 0.4138 0.4152 0.4060
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
7
x lamp mT-G EasyWhiTE lEDs
cree easyWhite color temPeratures Plotted oN the 1931 cie curVe (tJ = 85°c)
0.45
0.44 0.43
ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions
2700K 3000K
3500K
0.42
0.41 0.40
4500K
4000K
27F 30F
CCy
0.39
0.38 40F 0.37
35F
0.36
0.35
0.40
0.41
0.42
0.36
0.37
0.38
0.39
0.43
0.44
0.45
0.46
0.47
0.48
CCx
0.45
0.44
0.43 0.42
ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions
2700K 3000K
3500K
4000K 4500K
0.41
0.40 0.39
27H
30H
CCy
35H
0.38
0.37 0.36 0.35
40H
0.38
0.42
0.45
CCx
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
0.49
0.36
0.37
0.39
0.40
0.41
0.43
0.44
0.46
0.47
0.48
0.49
8
x lamp mT-G EasyWhiTE lEDs
biN aNd order code format
Bin codes and order codes are configured as follows:
order code
Series MTG = MT-G Internal code Internal code Kit code SSSCCC-BB-HHHH-NNNNNNNNN Vf class: B0 = 6-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (nonstandard) Color EZW = EasyWhite
bin code
Series MTG = MT-G Internal code Flux bin CRI Specification H = 80 min CRI SSSCCC-BB-WWW-FF-NNRAAAA E = 77 min CRI Internal Code Vf class: B0 = 6-V class N0 = 36-V class Chromaticity bin Color EZW = EasyWhite
staNdard order codes aNd biNs (XlamP mt-G easyWhite)
Xlamp mt-G easyWhite led standard order codes
min. luminous flux (lm) @ tj=85°c, 6V, 1100 ma @ tj=85°c, 36V, 185 ma Group flux (lm)
chromaticity regions
6V order code
36V order code
easyWhite D0 400 27F 27H 27F 27H 30F e0 440 30H 35F 35H 27F 27H 30F F0 480 30H 35F 35H 40F 40H 30F 30H G0 520 35F 35H 40F 40H H0 560 40F 40H MTGeZW-00-0000-0B00D027F MTGeZW-00-0000-0B00D027H MTGeZW-00-0000-0B00e027F MTGeZW-00-0000-0B00e027H MTGeZW-00-0000-0B00e030F MTGeZW-00-0000-0B00e030H MTGeZW-00-0000-0B00e035F MTGeZW-00-0000-0B00e035H MTGeZW-00-0000-0B00F027F MTGeZW-00-0000-0B00F027H MTGeZW-00-0000-0B00F030F MTGeZW-00-0000-0B00F030H MTGeZW-00-0000-0B00F035F MTGeZW-00-0000-0B00F035H MTGeZW-00-0000-0B00F040F MTGeZW-00-0000-0B00F040H MTGeZW-00-0000-0B00G030F MTGeZW-00-0000-0B00G030H MTGeZW-00-0000-0B00G035F MTGeZW-00-0000-0B00G035H MTGeZW-00-0000-0B00G040F MTGeZW-00-0000-0B00G040H MTGeZW-00-0000-0B00H040F MTGeZW-00-0000-0B00H040H MTGeZW-00-0000-0N00D027F MTGeZW-00-0000-0N00D027H MTGeZW-00-0000-0N00e027F MTGeZW-00-0000-0N00e027H MTGeZW-00-0000-0N00e030F MTGeZW-00-0000-0N00e030H MTGeZW-00-0000-0N00e035F MTGeZW-00-0000-0N00e035H MTGeZW-00-0000-0N00F027F MTGeZW-00-0000-0N00F027H MTGeZW-00-0000-0N00F030F MTGeZW-00-0000-0N00F030H MTGeZW-00-0000-0N00F035F MTGeZW-00-0000-0N00F035H MTGeZW-00-0000-0N00F040F MTGeZW-00-0000-0N00F040H MTGeZW-00-0000-0N00G030F MTGeZW-00-0000-0N00G030H MTGeZW-00-0000-0N00G035F MTGeZW-00-0000-0N00G035H MTGeZW-00-0000-0N00G040F MTGeZW-00-0000-0N00G040H MTGeZW-00-0000-0N00H040F MTGeZW-00-0000-0N00H040H
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
9
x lamp mT-G EasyWhiTE lEDs
Notes
moisture sensitivity In testing, Cree has found XLamp MT-G EasyWhite LEDs to have unlimited floor life in conditions ≤30ºC / 85% relative humidity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reflow cycles, with visual and electrical inspections at each stage. rohs compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eU Directive 2002/95/ eC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision advisory claim WARNING. Do not look at exposed LeD lamps in operation. eye injury can result. For more information about LeDs and eye safety, please refer to the Cree LeD eye Safety Application Note (http://www.cree.com/products/pdf/XLamp_eyeSafety.pdf).
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
10 10
x lamp mT-G EasyWhiTE lEDs
refloW solderiNG characteristics
In testing, Cree has found XLamp MT-G easyWhite LeDs to be compatible with JeDeC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Average Ramp-Up Rate (Tsmax to Tp) Preheat: Temperature Min (Tsmin) Preheat: Temperature Max (Tsmax) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5°C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature
lead-based solder 3°C/second max. 100°C 150°C 60-120 seconds 183°C 60-150 seconds 215°C 10-30 seconds 6°C/second max. 6 minutes max.
lead-free solder 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260°C 20-40 seconds 6°C/second max 8 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
11 11
6
NOTICE IDENTIAL. THIS PLOT AND THE INFORMATION E WITHIN ARE THE PROPRIETARY PLOT AND THE INFORMATION AND IALPROPRIETARY OF CREE, INC. THIS PLOT E INFORMATION AND E COPIED, REPRODUCEDPLOT ON OF CREE, INC. THIS OR DISCLOSED TO ANY IZED PERSON DISCLOSED TO ANY ODUCED OR WITHOUTTHE WRITTEN CONSENT C. WITHOUTTHE WRITTEN CONSENT
5
5
4
4
3
3
REV
REV
2
2
DESCRIPTION
DESCRIPTION
REVISONS REVISONS
BY
1
BY
1
DATE
DATE
APP'D
A B
A B
C
x lamp mT-G EasyWhiTE lEDs C
D
INITIAL RELEASE INITIAL RELEASE CHANGED SOLDER PAD VIEW CHANGED SOLDER PAD VIEW ADDED STENCIL VIEW ADDED STENCIL VIEW CHANGED OVERALL DIM TO MATCH CUT LENGTH AND WIDTH
DC 10/8/10 DC 10/8/10 DC 1/11/11 DC 1/11/11 DC 2/18/11 DC 2/18/11 DC 3/25/11
APP'D
D
D
mechaNical dimeNsioNs
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
5
4
3
All measurements are ±.13 mm unless otherwise indicated.
6D
MT-G 6v
9.113
8.90
4.85 ±.25
4
4.85 ±.25
.650
8.90
8.90
.950
.650
3
.950
2
REVISONS
DESCRIPTION
5
NOTICE DENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND L INFORMATION OF CREE, INC. THIS PLOT COPIED, REPRODUCED OR DISCLOSED TO ANY ED PERSON WITHOUTTHE WRITTEN CONSENT .
C
C
REV
A
INITIAL RELEASE
9.113
8.90
8.90 8.90
8.90
4.85 ±.25
R4.100 R4.100
9.113
.650
8.90 .950
.500 .500
4.85 ±.25 .650
MT-G36v
8.900
C
8.900
.500
.500
.889 1.090
.889 1.090
8.839
8.839
.889
.889 1.090
6.0006.000
B
B
6.000
6.000
8.90
1.090 .937
8.90
.937
3.175
9.113
3.175
8.900
8.072 8.900 6.198 8.072
6.198
1.722
1.722
R4.100
3.175 .937 .950
.500
3.175
.937
R4.100
DRAWN BY
6.000
DATE
.950
8.900
.500
B COMMENDED PC BOARD SOLDER PAD D PC BOARD SOLDER PAD
6.000
5
DATE DRAWN UNLESS OTHERWISE SPECIFIED BY UNLESS OTHERWISE SPECIFIED D. CRONIN 10/8/10 10/8/10 DIMENSIONS DIMENSIONS ARE IN ARE IN D. CRONIN DATE MILLIMETERS AND AFTER CHECK MILLIMETERS AND AFTER FINISH. FINISH. CHECK DATE 1.072 1.072 TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .25 APPROVEDAPPROVEDDATE DATE .XX ± .XX ± .25 1.905 1.905 .125 TITLE .XXX ± .XXX ± .125 X° ° ± .5 ° X° ± .5 1.905 1.905 THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION MATERIAL MATERIAL FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY .X1.5 ± 1.5 .X ± SIZE .75 .XX ± .XX ± .75 RECOMMENDED PATTERN RECOMMENDED STENCILSTENCIL PATTERN .25 FINAL PROTECTIVE FINISH FINAL PROTECTIVE FINISH .XXX ± .XXX ± .25 X° ° ± .5 ° X° ± .5
4600 Silicon 4600 Silicon Drive Drive Durham, N.C Durham, N.C 27703 27703
8.839
Phone (919) 313-5300 Phone (919) 313-5300 Fax (919) 313-5558 Fax (919) 313-5558
.500
.889
.889
TITLE
A
A
1.090
TIGER 9191 OUTLINE TIGER 9191 OUTLINE 1.090
CC
SCALE
SIZE
DRAWING NO. DRAWING NO.
2610-00011 2610-00011
1
REV.
REV.
CD
OF
SURFACE .6 SURFACE FINISH: 1FINISH: 1.6
SCALE
6
5
4
4
3
3
2
2 .937
9.000 9.000
SHEET SHEET OF
1 /1 1 /1
1
8.900 .500 6.000 .889 1.090
8.839 .889 1.090 .937 3.175
3.175
8.900
8.072
6.198
1.722
3.175 .937
A
8.900
8.072
6.198
1.722
.950
.950
1.072
3.175
1.905 1.905
DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 °
RECOMMENDED PC BOARD SOLDER PAD
.950
6
.937
THIRD ANGLE PROJECTION
DRAWN BY DATE
UNLESS OTHE DIMENSIO MILLIMETERS A TOLERANCE U .XX .XXX X°
UNLESS OTHERWISE SPECIFIED RECOMMENDED STENCIL PATTERN
D. CRONIN
CHECK
10/8/10
DATE
1.072 1.905
5 4
FOR SHEET M .X .XX .XXX X°
SURFACE FIN
APPROVED DATE
3TITLE
1.905 OMMENDED PC BOARD SOLDER PAD RECOMMENDED STENCIL PATTERN
5 4
THIRD ANGLE PROJECTION
MATERIAL
36V MT-G
SIZE
FINAL PROTECTIVE FINISH
6
SCALE 2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the CreeFINISH: and XLamp are registered trademarks logo 1.6 SURFACE 9.000 and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
C
DRAWING NO.
261
3
2
12 12
6
NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC.
5
4
3
REV
2
REVISONS
DESCRIPTION BY
1
DATE APP'D
x lamp mT-G EasyWhiTE lEDs
D
taPe aNd reel
D
1.5± .1 User Feed Direction END 12±.1 4±.10 CATHODE SIDE START 1.75 ±.10 5.25
16 +.3 -.0
C
9.4
C
ANODE SIDE
6
NOTICE 160mm (min) of CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION empty pockets CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION sealed with tape OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY (15 pockets min.) CONSENT UNAUTHORIZED PERSON WITHOUT THE WRITTEN OF CREE INC.
Trailer
5
Loaded Pockets (500 Lamps)
4
3
2
1
2400-00009
Leader 400mm (min) of empty pockets sealed with tape (35 pockets min.)
INDEX QTY ITEM COMMENTS
1 2
1 2
2400-00009-CORE 2400-00009-REEL
D D
B B
C
A
12.4 +.2 .0 MEASURED AT HUB
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° 16.4 THIRD ANGLE PROJECTION +0.2 FOR SHEET METAL PARTS ONLY .X ± 1.5 .0 .XX ± .75 .XXX .25 MEASURED AT±HUB X° ± .5 ° SURFACE FINISH:
1.6
DRAWN BY DATE
C
D. CRONIN
CHECK
1/28/11
DATE
4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558
TITLE
-APPROVED
-DATE
330 +.25 -.75
A
-MATERIAL
--
MTG LOADING SPEC
1.9±.4
SIZE SCALE
-FINAL PROTECTIVE FINISH
-2
C
3.000
DRAWING NO.
2402-00016
SHEET OF
REV.
A
1 /1
6
5
4
3
1
21 ±.4
13.1 ±.2
B B
12.4 +1.0 -.5 MEASURED AT EDGE 60° 60°
REVISONS
REV DESCRIPTION BY DATE APP'D
A
THIRD ANGLE PROJECTION
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH:
63
DRAWN BY
DATE
D. CRONIN
CHECK
09/29/09
DATE
4600 Silicon Drive Durham, N.C 27703 Phone (919) 313-5300 Fax (919) 313-5558
TITLE
-APPROVED
-DATE
A
-MATERIAL
--
REEL, 13" X 12MM, 3 PIECE SNAP
SIZE
ANTI-STATIC HIPS
FINAL PROTECTIVE FINISH
2
C
0.500
DRAWING NO.
2400-00009
SHEET OF
REV.
A
1 /1
SCALE
6
5
4
3
1
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
13 13
x lamp mT-G EasyWhiTE lEDs
PacKaGiNG Humidity Indicator Humidity Indicator Card (inside bag) (inside bag)
Dessicant Desiccant (inside bag) (inside bag)
Vacuum-Sealed Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Moisture Barrier Bag
Label with CREE Bin Code Cree Bin Label with CREE Label Cree & Barcode Bin Code# Bin Code, Qty, Lot & Barcode Label # Code, Qty, Lot
Label with Cree Bin Label with Customer Labelwith PO Label with Cree P/N, Qty, Lot #, Lot# # Code, Qty, CustomerBin P/N, Qty, Lot Lot # Code, Qty, #, PO #
Patent Label Patent Label Label with Customer Order Label with Customer Order Code, Qty, Reel ID, PO # Code, Qty, Reel ID, PO #
Label with Customer Order Code, Qty, Reel ID, PO#
Label with Cree Bin Code, Qty, Lot #
2011 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks and EasyWhite is a trademark of Cree, Inc. of Cree, Inc.
14 14
