3RHP2450D12

3RHP Series AC Control • 40 and 50A output • Voltage ratings to 600 VAC • Lifetime 2 million operations at full load • LED input status indicator • Wire, lug or quick connect termination • Industry Standard DP contactor mounting PRODUCT SELECTION Control Voltage 20-26 VAC 100-130 VAC 208-240 VAC 40A 280 VAC 3RHP2840E 3RHP2840F 3RHP2840G 50A 280 VAC 3RHP2850E 3RHP2850F 3RHP2850G 40A 600 VAC 3RHP6040E 3RHP6040F 3RHP6040G 50A 600 VAC 3RHP6050E 3RHP6050F 3RHP6050G OUTPUT SPECIFICATIONS (voltage) Description Operating Voltage (47-63Hz) [Vrms] Maximum Off-State Leakage Current per channel 280 VAC 24-280 0.05 mA @ 240 VAC 600 VAC 48-600 0.06 mA @ 480 VAC OUTPUT SPECIFICATIONS (current) Description 40A 50A 50A Resistive / 40A Inductive 1/4" Quick Connect and box lugs 6-14 AWG Maximum Load Current per phase @ 40°C [Arms] (1) 40A Resistive / 30A Inductive Power terminals 1/4" Quick Connect and 10x32 binder head screws Wire Size 8-14 AWG INPUT SPECIFICATIONS Description Coil Voltage [50/60 Hz] Min. Turn-On Voltage Min. Turn-Off Voltage Coil Power Consumption, inrush. Coil Power Consumption, sealed. SUFIX E 20-26 VAC 20 VAC 12 VAC 56 VA @ 220 VAC 6.6 VA @ 220 VAC SUFIX F 100-130 VAC 100 VAC 24 VAC 56 VA @ 220 VAC 6.6 VA @ 220 VAC SUFIX G 208-240 VAC 208 VAC 48 VAC 56 VA @ 220 VAC 6.6 VA @ 220 VAC GENERAL SPECIFICATIONS Description Dielectric Strength, Input to Output Dielectric Strength, Input/Output to ground Contacts (2) Ambient Operating Temperature Range (3) Ambient Storage Temperature Range Max. Turn-On Time 50/60 Hz Max. Turn-Off Time 50/60Hz Maximum Number of Operations Lifetime Number of Operations @ Rated Current (4) Weight (typical) Screw Torque (input/Output) 40A Screw Torque (input/Output) 50A Parameters 4000 Vrms 2500 Vrms Three Normally Open -20 to 65 °C -40 to 100 °C 20 ms / 16.6 ms 40 ms / 32 ms 30 per Minute > 2 Million 1.19 lbs (540 g) 10 in lb (1.13 Nm) / 18 in lb (2.1 Nm) 10 in lb (1.13 Nm) / 25 in lb (2.9 Nm) GENERAL NOTES (1) (2) (3) (4) See Derating curves for additional operating conditions. The R HP includes a Solid State Relay, therefore electrical isolation is not provided. The R HP includes over temperature protection for the solid state relay. 40°C ambient temperature, 30 operations/min, maximum voltage control. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION TYPICAL ELECTRICAL CONNECTIONS AGENCY APPROVALS UL/cUL Rev. 011409 ACCESSORIES ANNEX - ENVIROMENTAL INFORMATION