CTRB6025-10

CTR Series • Ratings 25A per phase @ 600 VAC • DIN-RAIL or Panel Mount 90mm (width) package • 100K-cycle UL 508 Endurance Rating for Enhanced Reliability • SCR output for heavy industrial loads • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • UL Recognized, CE, RoHS and EMC Compliant PRODUCT SELECTION Description 4-32 VDC Control 90-140 VAC Control 180-280 VAC Control 25 A CTRD6025 CTRB6025 CTRC6025 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [VRMS] Transient Overvoltage [Vpk] Maximum Load Current (2) [Arms] Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] HP Rating @ 480V Minimum Power Factor (with Maximum Load) Min/Max stranded wire Min/Max solid wire CTRD6025 48-600 1200 25 0.1 0.25 500 1.35 275/300 380/370 3 0.5 16/8 AWG 16/10 AWG CTRB6025 48-600 1200 25 0.1 0.25 500 1.35 275/300 380/370 3 0.5 16/8 AWG 16/10 AWG CTRC6025 48-600 1200 25 0.1 0.25 500 1.35 275/300 380/370 3 0.5 16/8 AWG 16/10 AWG INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Minimum Input Current (4) Maximum Input Current (4) Maximum Turn-On Time [msec] (5) Maximum Turn-Off Time [msec] Min/Max stranded/solid wire CTRD6025 4.0-32 VDC 4.0 VDC 1.0 VDC 50 mA 62 mA 1/2 Cycle 1/2 Cycle 24/16 AWG CTRB6025 90-140 Vrms 90 Vrms 10 Vrms 15 mA 19 mA 20 30 24/16 AWG CTRC6025 180-280 Vrms 180 Vrms 10 Vrms 19 mA 24 mA 20 30 24/16 AWG GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Status Indicator Display Weight (typical) Terminals Recommended Terminal Screw Torque Range: Min. Side by Side Spacing CTRD6025 4000Vrms CTRB6025 4000Vrms CTRC6025 4000Vrms 109 Ohms 8 pF -20ºC to 80ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) 109 Ohms 8 pF -20ºC to 80ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) 109 Ohms 8 pF -20ºC to 60ºC -40ºC to 100ºC Green LED 21.2 oz. (600g) Box Clamp Type 5.0-6.0 in lb (0.6-0.7 Nm) 0.8 inch (20mm) GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) See Derating Curves 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) Turn-on time for DC control random turn-on versions is 0.02 msec 5) Input circuitry incorporates active current limiter. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Rev. 032910 EMC Compatibility IEC 62314 IEC 60068-2-6 35mm/10-55Hz IEC 60068-2-27 15G / 11ms IEC 61000-4-2 Level 3 Electrostatic Discharge IEC 61000-4-3 Level 3 Radiated Electromagnetic Noise IEC 61000-4-4 Level 3 Immunity to Electrically Fast Transients IEC 61000-4-5 Level 3 Immunity to Electrical Surges IEC 61000-4-6 Level 3 Conducted Electromagnetic Noise CISPR 11 Class A Conducted and Radiated Noise for Industrial Environments Pollution Degree 2 Overvoltage Category III ANNEX - ENVIROMENTAL INFORMATION