D2W202F

D2W202F

  • 厂商:

    CRYDOM(快达)

  • 封装:

    4-SIP

  • 描述:

    RELAY SSR 2.0A SIP DC 280V

  • 详情介绍
  • 数据手册
  • 价格&库存
D2W202F 数据手册
D2W Series • SIP SSR • Ratings to 3.5A @ 280 VAC • DC control • Zero-crossing (resistive loads) output • Internal snubber network PRODUCT SELECTION Control Voltage 3-32 VDC 2A D2W202F 3A D2W203F 3.5A D2W203F-11 OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) 24-280 600 8 200 2 0.06 28 1.4 0.5 24-280 600 8 200 3 0.06 70 1.4 0.5 24-280 600 8 200 3.5 0.06 80 1.4 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 3-32 VDC 3.0 VDC 1.0 VDC 3.0 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 Vrms 10 9 Ohm 10 pF -30 to 80°C -30 to 125°C 0.6 oz. (17g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistance are measured between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. MECHANICAL SPECIFICATIONS P IN PIN PIN PIN 1: AC LOAD 2: AC LOAD 3: +DC CONTROL 4: -DC CONTROL THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 061608 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. ANNEX - ENVIROMENTAL INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.
D2W202F
物料型号: - D220F11 - D220F - D2202F - 32C

器件简介: CST D2W系列为PCB安装的固态继电器(SIP SSR),具有3.5A @ 280 VAC的额定值,支持直流控制,零交叉(电阻性负载)输出,以及内部吸收网络。

引脚分配: - PIN 1: AC LOAD - PIN 2: AC LOAD - PIN 3: +DC CONTROL - PIN 4: -DC CONTROL

参数特性: - 工作电压(47-63Hz):24-280Vrms - 瞬态过电压:600Vpk - 最大关断状态下的漏电流@额定电压:8mArms - 最小关断状态下dv/dt@最大额定电压:200V/usec - 最大负载电流:2Arms至3.5Arms - 最小负载电流:0.06Arms - 最大浪涌电流(16.6ms):28Apk至80Apk - 最大导通状态下电压降@额定电流:1.4Vpk - 最小功率因数(最大负载):0.5

功能详解: 该系列继电器具备直流控制功能,能够处理电阻性负载的零交叉输出,并且内部集成了吸收网络以减少电磁干扰。

应用信息: 适用于需要固态继电器的场合,如工业控制、家用电器等,具体应用需根据其电气参数和功能选择合适型号。

封装信息: 封装材料为热导电环氧树脂,具体尺寸和封装形式未在文档中详述。
D2W202F 价格&库存

很抱歉,暂时无法提供与“D2W202F”相匹配的价格&库存,您可以联系我们找货

免费人工找货