MPF240D4R

MPF Series • SIP SSR • Ratings to 4A @ 280 VAC • SCR output for heavy industrial loads • DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) out put PRODUCT SELECTION Control Voltage 4-10 VDC Zero Crossing MPF240D4 Random Fire MPF240D4R OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum Load Current [Arms] Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Minimum Power Factor (with Maximum Load) MPF240D4 12-280 600 0.1 500 4 0.1 40 1.5 0.5 MPF240D4R 12-280 600 0.1 500 4 0.1 40 1.5 0.5 INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ 5 VDC Nominal Input Impedance Maximum Turn-On Time [msec] Maximum Turn-Off Time msec] MPF240D4 4-10 VDC 4.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle MPF240D4R 4-10 VDC 4.0 VDC 1.0 VDC 15 mAdc 300 Ohm 0.1 1/2 Cycle GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz)(2) Minimum Insulation Resistance (@ 500 VDC)(2) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 3750 Vrms 10 9 Ohm 8.0 pF -30 to 80°C -30 to 125°C 0.6 oz. (17g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Dielectric and insulation resistance are measured are between input and output 3) Off-State dv/dt test method per EIA/NARM standard RS-443 MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS UL E116950 CSA LR81689 Rev. 011309 ANNEX - ENVIROMENTAL INFORMATION