MS11-CX2405A

Series MS11-CMX 3 -10 Amp • 0-200 Vdc • DC Output • DIN Rail Mount (TS 35) • MOSFET Output • Extra Low On State Resistance • Input Status LED DC output SPST-NO solid state relays use MOSFET output for high switching capabilities in a DIN Rail (TS-35) mount air-cooled package. MODEL NO. INPUT SPECIFICATIONS 1 Control Voltage Range Nominal Input Impedance Typical Input Current @ 5 Vdc Must Turn On Voltage Must Turn Off Voltage MS11-CMX60D5 MS11-CMX60D10 MS11-CMX100D6 MS11-CMX200D3 5-10 Vdc 300 Ohm 12 mA 5 Vdc 1.0 Vdc 5-10 Vdc 300 Ohm 12 mA 5 Vdc 1.0 Vdc 5-10 Vdc 300 Ohm 12 mA 5 Vdc 1.0 Vdc 6-10 Vdc 300 Ohm 12 mA 6 Vdc 1.0 Vdc OUTPUT SPECIFICATIONS 1 3 Operating Voltage Range Load Current Range Max. Surge Current, (10 msec) Max.Off-State Leakage @ Rated Voltage 0-60 Vdc 0-5 Adc 60 Apk 100 µAdc .10 Ohm 0.5V 1.0 msec 300 µsec 0-60 Vdc 0-10 Adc 100 Apk 100 µAdc 4 .018 Ohm 0.18V 1.0 msec 300 µsec 0-100 Vdc 0-6 Adc 100 Apk 100 µAdc .040 Ohm 0.24V 1.0 msec 300 µsec 0-200 Vdc 0-3 Adc 30 Apk 100 µAdc .20 Ohm 0.6V 1.0 msec 300 µsec Max. On-State Resistance @ Rated Current (R DS-ON) Max. On-State Voltage Drop @ Rated Current Max.Turn-On Time @ 10Vdc Control Max. Turn-Off TIme @ 10Vdc Control © 2007 CRYDOM Inc., Specifications subject to change without notice. GENERAL NOTES 1 All parameters at 25ºC unless otherwise specified. 2 Dielectric and insulation resistance are 3 Inductive loads should be diode suppressed. 4 At 55 Vdc. measured between input and output. SERIES MS11-CMX. Rev. 110707 PAGE 1 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series MS11-CMX 3 -10 Amp • 0-200 Vdc • DC Output GENERAL SPECIFICATIONS Dielectric Strength 2 Insulation Resistance (Min.) @ 500 Vdc 2 Max. Capacitance (Input/Output) Ambient Operating Temperature Range Ambient Storage Temperature Range 2500 Vrms 10 9 Ohm 15 pF -30 to 80°C -30 to 125°C MECHANICAL SPECIFICATIONS Weight: (typical) Encapsulation(SSR): 30 g Thermally Conductive Epoxy CURRENT DERATING CURVES 7.0 6.0 LOAD CURRENT [AMPS] CMX100D6 CMX60D5 CMX200D3 5.0 4.0 3.0 2.0 1.0 0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] CRYDOM Solid State Relay -A2 +A1 CMX Series Input 54.0 Output 12.0 LOAD CURRENT [AMPS] 10.0 8.0 6.0 4.0 2.0 0 20 40 60 80 AMBIENT TEMPERATURE [ °C ] DIN Rail TS35 CMX60D10 85.0 12.5 All dimensions are in millimeters (not to scale) Colour of carrier including terminations - orange Max. Load Current vs. Temp. © 2007 CRYDOM Inc., Specifications subject to change without notice. A PPROVALS (SSR ONLY) UL E116950 (3A, 6A & 10A Models) SERIES MS11-CMX. Rev. 110707 PAGE 2 OF 3 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Inc., 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 606030 • FAX +44 (0)1202 606035 Crydom SSR Ltd., Arena Business Centre, Holyrood Close, Poole, Dorset BH17 7FJ, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 29.0 Series MS11-CX 5 Amp• 240 Vac• AC Output • DIN Rail Mount (TS-35) • SCR Output Rating • Ultra High Surge • Crydom’s Patented Design • Input Status LED Crydom's family of SPST-NO relays achieves the highest power switching capability in a DIN mounted air-cooled package. Advanced features include exceptional steady state current, plus ultra-high surge ratings. Models are available to switch up to 280 Vrms with AC or DC control, and either zero-cross or random turn-on ("R") switching versions. MODEL NUMBERS OUTPUT SPECIFICATIONS 1 Operating Voltage (47-63 Hz) [Vrms] Load Current Range [Arms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] AC CONTROL (120Vac) (24Vac) DC CONTROL (5Vdc) (24Vdc) MS11-CX2405A MS11-CXE240A5 MS11-CX240D5 MS11-CXE240D5 12-280 .06-5 600 250 1.4 260 0.1 500 1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 DC CONTROL 24Vdc 5Vdc MS11-CX240D5 MS11-CXE240D5 Max. On-State Voltage Drop @ Rated Current [Vpk] Maximum I 2 t for Fusing, (8.3 msec.) [A 2 sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] 2 Max. Turn-On Time 3 Max. Turn-Off Time Power Factor (Min.) with Max. Load INPUT SPECIFICATIONS 1 Nominal Voltage MODEL NUMBERS Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedance Typical Input Current @ Nominal Voltage AC CONTROL 4 24Vac 120Vac MS11-CX240A5 MS11-CXE240A5 4-5 Vdc 3.0 Vdc 1.0 Vdc 300 Ohm 12 mA 15-32 Vdc 15.0 Vdc 1.0 Vdc 1.0k Ohm 8 mA 90-140 Vrms 90.0 Vrms 10.0 Vrms 14.1k Ohm 10 mArms 18-36 Vrms 18.0 Vrms 2.0 Vrms 4.2k Ohm 5 mArms GENERAL NOTES 1 All parameters at 25ºC unless otherwise specified. 2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3 Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). 4 No input status LED on AC control modules. © 2005 CRYDOM CORP, Specifications subject to change without notice. SERIES MS11-CX. Rev. 012505 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 •Tech Support (877) 702-7700 • FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com • WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 Series MS11-CX 5Amp • 240 Vac • AC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output/Base Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range 2500 Vrms 10 9 Ohm 10 pF -30 to 80ºC -30 to 80ºC MECHANICAL SPECIFICATION Weight: (typical) Encapsulation (SSR): 30 grms Thermally Conductive Epoxy CURRENT DERATING CURVE 6.0 LOAD CURRENT [AMPS] CRYDOM Solid State Relay -A2 +A1 5.0 4.0 54.0 CX Series Input Output 3.0 2.0 1.0 0 20 40 60 80 DIN Rail TS35 AMBIENT TEMPERATURE [ C] Max. Load Current vs. Temp. 85.0 12.5 All dimensions are in millimeters (not to scale) Colour of carrier and termination housing - orange Input status LED is on DC control module only © 2005 CRYDOM CORP, Specifications subject to change without notice. AVAILABLE OPTIONS R Random Turn-On Switching Example: MS11-CX240D5R, MS11-CX240A5R APPROVALS ( SSR ONLY ) UL E 116949 CSA LR 81689 VDE 70938 UG (240V, DC Control Only) SERIES MS11-CX Rev. 012405 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 •Tech Support (877) 702-7700 • FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com • WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX: +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 29.0 DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / PERIGO HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo. • Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION • Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil • Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION. • Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen • Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSI ONE. • Spenga tutta l'alimentazion e che fornisce questa apparecchiatu ra prima del lavorare a questa apparecchiatu ra • Verificare tutti i collegamenti e sostituire tutte le coperture prima della rotazione sull'alimentazi one L'omissione di seguire queste istruz ioni provocherà la morte o di lesioni serie RISCO DE DESCARGA ELÉTTRICA OU EXPLOSÃO • Desconectar o equipamento de toda á energia antes de instalar ou trabalhar com este equipamen to • Verificar todas as conexões e recolocar todas as tampas antes de religar o equipamento O não cumprimento destas instruções pode levar á morte ou lesões sérias. WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / AVISO RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product's side panels may be hot, allow time for product to cool before touching. • Follow proper mounting instructions including torque values. • Do not allow liquids or foreign objects to enter this product. Failure to follow this instruction can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER • Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher. • Respecter les consignes de montage, et notamment les couples de serrage. • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG • Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren. • Beachten Sie die Montageanweisungen, • Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD • Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo. • Respetar las instrucciones de montaje, y en particular los pares de apretado. • No dejar que penetren líquidos o cuerpos extraños en el producto. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO • I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo. • Seguire le istruzioni di montaggio corrette. • Non far entrare liquidi o oggetti estranei in questo apparecchio. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCO DE DANO MATERIAL E DE AQUECIMENTO • Os painéis laterais do produto podem estar quentes; dê tempo ao produto para arrefecer antes de lhe tocar. • Siga devidamente as instruções de montagem. • Não permita a entrada de líquidos e de objectos estranhos no produto. A não observância destas precauções pode provocar a morte, ferimentos graves ou danos materiais. SERIES MS11-CMX. Rev. 110707 PAGE 3 OF 3 ANNEX – ENVIRONMENTAL INFORMATION: The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium biphenyls diphenyl ethers (Cr (VI)) (PBB) (PBDE) X X O O O O O O O O O O Semiconductor die Solder - : SJ/T11364 - 2006, (Pb) X X (Hg) O O (Cd) O O (Cr (VI)) O O (PBB) O O (PBDE) O O © 2007 CRYDOM Inc., Specifications subject to change without notice.