SPF380D

SPF Series • SIP SSR • Ratings to 25A (forced air) @ 480 VAC • SCR output for heavy industrial loads • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Control Voltage 4-15 VDC 15-32 VDC 18-36 VAC 90-140 VAC 25A SPF240D25 SPFE240D25 SPFE240A25 SPF240A25 25A SPF380D25 SPFE380D25 25A SPFE480D25 SPF480D25 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum Load Current [Arms](3) Minimum Load Current [Arms] Maximum Surge Current (16.6ms) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum I² t for fusing (8.3 msec) [A² sec] Minimum Power Factor (with Maximum Load) 12-280 600 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 48-530 1200 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 48-660 1200 0.1 500 Forced Air 25 Convection Air 10 0.06 250 1.6 260 0.5 For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Turn On Voltage Minimum Turn-Off Voltage Typical Input Current @ Nominal Voltage Nominal Input Impedance Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] SPF240D25 3-15 VDC 3.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle SPF380D/480D 4-15 VDC 4.0 VDC 1.0 VDC 15 mAdc 240 Ohm 1/2 Cycle 1/2 Cycle SPFExxxD25 15-32 VDC 15.0 VDC 1.0 VDC 15 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle SPF240A25 90-140 VAC 90.0 Vrms 10.0 Vrms 10 mAdc 14.1 k Ohm 10 40 SPFE240A25 18-36 VAC 18.0 Vrms 2.0 Vrms 10 mAdc 2.1 k Ohm 10 40 GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Parameters 4000 Vrms 10 9 Ohm 8 pF -30 to 80˚C -30 to 125˚C 0.85 oz. (25g) Thermally Conductive Epoxy GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443,13.11.1 3) Heatsink temperature 85 ûC Maximum. 4) Turn-On Time for Random Turn-On versions 0.1 msec (DC Control Models) MECHANICAL SPECIFICATIONS A C CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL UL E116950 R ev. 061608 THERMAL DERATE INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice. ANNEX - ENVIROMENTAL INFORMATION For Contact information visit our web site. www.crydom.com ©2008 Crydom, Inc. Specifications subject to change without notice.