CCLD-054X-20-622.080

CCLD-054X-20-622.080 LVDS Clock Oscillator Model CCLD-054X is a 622.080Mhz LVDS Clock Oscillator operating at 3.3Volts. Enable/Disable function used for system testing is offered as a standard feature. Operating Temperature is from -40 to +85C with +/-20PPM Frequency Stability. 5x7mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev.: B Date: 10-10-07 CCLD-054X-20-622.080 LVDS Clock Oscillator Performance Specification Nominal Frequency: Frequency Stability Output Phase Noise Min. Typ. 622.08 Max Units MHz ppm ±20 @1KHz Offset @10KHz Offset @1MHz Offset Jitter: 12KHz-20MHz -100 -125 -138 -140 -142 0.2 0.2 0.90 247 0.5 1.40 1.10 330 0.5 2 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz pS,RMS @100KHz Offset @10MHz Offset Differential Clock Rise Time Differential Clock Fall Time Output High Voltage, VOH Output Low Voltage, VOL Differential Output Differential Output Error Output Leakage Current Output Load (differential) 0.7 1.60 454 200 50 0.7 nSec nSec V V VOD mV uA V pSec Ohms Differential Output Skew 100 ±10 VCC 400 55 25 80 10 Enable High Voltage, VIH Disable Low Voltage, VIL Duty Cycle @ 1.25V(LVDS) Offset Voltage Offset Error 0.7*VCC GND 45 0 Output Enable/Disable Tiime 0.3*VCC V 50 3 nSec % V V V mA uA °C °C 1.125 3.15 1.2 3.3 1.375 3.45 Supply Voltage Supply Current, Icc Enabled Operating Temp. Storage Temp. Supply Current, Icc Disabled -40 -45 +85 +90 Parameter Mechanical Shock Mechanical Vibration Solderability Resistance to Solvents Conditions MIL-STD-883, Method 2002 MIL-STD-883, Method 2007 MIL-STD-883, Method 2003 MIL-STD-883, Method 2016 Rev.: B Date: 10-10-07 CCLD-054X-20-622.080 LVDS Clock Oscillator 0.274 ±0.007 (6.96 ±0.18) CCLD054X20 622.08M DC Lot Code 0.193 ±0.007 (4.90 ±0.18) 0.045 ±0.008 (1.14 ±0.20) Pad 1 2 3 4 5 Connection N/C GND Out Comp. Out VCC SUGGESTED PAD LAYOUT Enable/Disable Denotes pad 1 0.055 Typ (1.40 Typ) 0.045 ±0.008 (1.14 ±0.20) #1 #6 #2 #5 #3 #4 via to ground 0.01µF 6 5 0.050 (1.27) 4 0.154 (3.91) 6 0.071 (1.80) 1 2 3 0.100 (2.54) 0.200 (5.08) 0.100 (2.54) 0.200 (5.08) LVDS Test Circuit OUT RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE 260°C 217°C 200°C 150°C Ramp-Up 3°C/Sec Max. Critical Temperature Zone Ramp-Down 6°C/Sec. 50 VOD VOS 50 Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. OUT NOTE: Reflow Profile with 240°C peak also acceptable. Rev.: B Date: 10-10-07