CCO-083-200.000

True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators Model CCO-083/085 (Clock Version) and CVXO-083/085 (VCXO Version) generate frequencies from 10 MHz to 200 MHz. This low current sinewave oscillator provides -150 dBc/Hz noise floor while only consuming 8mA typical. Output level is 0dBm Min into 50 ohms, and harmonics are lower than -20 dBc. The series has no sub-harmonics due to the use of Inverted Mesa (High Frequency Fundamental Crystal) technology. The oscillator is offered in an extended operating temperature range (-40°C to +85°C), also available in 3.3V and 5V models. Applications include low current applications and sources for driving PLLs and Mixers. Rev: L Date: 16-Sep-2021 Page 1 of 2 C CRYSTEK CORPORATION 16850 Oriole Road • Fort Myers, Florida 33912 Phone: 239-561-3311 • 800-237-3061 www.crystek.com True Sinewave Clock Oscillators and Voltage Controlled Crystal Oscillators 10.000 MHz to 200.000 MHz Frequency Range: Temperature Range: 0°C to +70°C -40°C to +85°C -45°C to 90°C Storage: 3.3V ±0.3V Input Voltage: (Option 3) 5.0V ±0.5V (Option 5) Input Current: 8mA Typical, 15mA Max @ 3.3V 12mA Typical, 20mA Max @ 5.0V True Sinewave Output: Phase Noise Typical: 50 Ω Load: 100 Hz -80 dBc/Hz 0 dBm Min into 50 Ω Power (std): 1 kHz -112 dBc/Hz +3 dBm Min into 50 Ω (Option B) 10 kHz -140 dBc/Hz +5 dBm Min into 50 Ω (Option C) 100 kHz -150 dBc/Hz +7 dBm Min into 50 Ω (Option D) -20 dBc Max Harmonics: None Sub-Harmonics: None Enable/Disable: -150dBc Typical Phase Noise Floor: