CCPD-575X-20-80.000

CCPD-575 Model 5×7.5 mm SMD, 3.3V, LVPECL CCPD-575 5×7.5mm SMD Ultra-Low Phase Noise LVPECL Clock Oscillator Model CCPD-575 has an industry leading phase noise for an LVPECL oscillator. The noise floor is typically @ -162 dBc/Hz! This is at least 15 dB lower phase noise than most LVPECL oscillators on the market today. Close-in phase noise is also excellent @ -90 dBc/Hz for the 100 MHz variant. This overall ultra-low phase noise translates to a typical phase jitter of 65 fs RMS (12 kHz to 20 MHz) at 156.250 MHz. 5×7.5mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev: U Date: 16-Sep-2021 Page 1 of 4 C CRYSTEK CORPORATION 16850 Oriole Road • Fort Myers, Florida 33912 Phone: 239-561-3311 • 800-237-3061 www.crystek.com CCPD-575 Model 5×7.5 mm SMD, 3.3V, LVPECL CCPD-575 5×7.5mm SMD Ultra-Low Phase Noise LVPECL Clock Oscillator Frequency Range: 50.000 MHz to 156.250 MHz* *Standard Frequencies Frequency Stability Options: ±20ppm, ±25ppm, ±50ppm (MHz) Operating Temperature Range: -40°C to +85°C 80.000 100.000 -45°C to 90°C Storage Temperature Range: 122.880 3.3V ± 0.3V Input Voltage: 125.000 156.250 Input Current: 80mA Typical, 88mA Max Output: Differential LVPECL 40/60% Max @ zero crossing point Symmetry: Rise/Fall Time: 300 ps Max (20% to 80%) Logic Terminated to Vdd-2V into 50 Ω: “0”=1.37 Min, 1.74 Max Output Low Voltage: “1”=2.05 Min, 2.54 Max Output High Voltage: 200 ns Max Disable Time: 200 ms Max Enable Time: 65 fs RMS Typical @ 156.250 MHz Phase Jitter: 12kHz~20MHz Phase Noise: (See Plot Below) None Sub-harmonics: