CCSO-914X-250.000

CCSO-914X Ultra-Low Phase Noise SAW Clock Frequency Range: 245.760 MHz to 1500 MHz True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt CCSO-914X3-250.000 Model CCSO-914X is a SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -145 dBc/Hz phase noise at 10 kHz offset at 1 GHz, 3.3V & 5V input voltage available, -40°C to +85°C operating temperature, FR5 PCB and 9×14 mm SMT package. The oscillator has no sub-harmonic and the second harmonic is typically -20 dBc. Applications include: Analog to Digital Converters (A/D Converters), System Clock for Network Clock Generator/ Synchronizer, Clock for DDS, Test and Measurement, Avionics, Point-to-Point Radios, and Multi-point Radios. C CRYSTEK C OR P OR A T IO N Rev: Y Date: 20-May-2020 Page 1 of 5 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt Frequency Range: Temperature Range: Storage: Input Voltage: (option 3) (standard) Frequency vs Temperature (Typical): Start-Up Time: 2nd Harmonic: Sub-Harmonics: 245.760 MHz to 1500 MHz -40°C to +85°C -45°C to 90°C 3.3V ± 0.165V 5.0V ±0.25V ±200ppm (-40/85) ±150ppm (0/70) 25mA Typical, 35mA Max True SineWave +5dBm Min into 50 Ω Load +8dBm Min into 50 Ω Load 2ms Typical, 10ms Max -20dBc Typical, -15dBc Max None Phase Noise Typical @ 1 GHz: 1kHz 10kHz 100kHz 1MHz 10MHz -116 dBc/Hz -145 dBc/Hz -168 dBc/Hz -170 dBc/Hz -171 dBc/Hz G-sensitivity: 0.9×10-9 per g Input Current: Output: Output Power: (3.3V) (5.0V) 0.090 (2.29) SUGGESTED PAD LAYOUT 0.040 (1.01) 0.050 (1.27) 0.560 (14.2) 0.090 (2.29) CRYSTEK Part Number Frequency Date Code 0.360 (9.14) 0.180 (4.57) 1 2 4 3 0.125 (3.18) 0.100 (2.54) 0.560 (14.2) inches mm 0.210 5.33 0.135 3.43 Table A C 0.280 (7.11) 0.200 (5.08) PAD FINISH: Immersion Gold (ENIG); 5 micro inches maximum Package Height Options Option L 0.040 (1.02) 0.050 (1.27) 0.200 (5.08) See Table A Standard 0.280 (7.11) CRYSTEK C OR P OR A T IO N Pad Connection 1 2 3 4 N/C GND Output Vdd Rev: Y Date: 20-May-2020 Page 2 of 5 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt Crystek Part Number Guide Available Frequencies (MHz): 245.760 500.000 916.000 250.000 622.080 1000.000 433.920 800.000 1500.000 CCSO - 914X 3 L - 1000.000 #1 #2 #3 #4 #5 #1 Crystek Saw Osc. #2 Model 914 with -40/85°C Temperature Range #3 (3 = 3.3Volts) (Blank = 5 Volts) #4 Height (L = 0.135") (Blank = 0.210") #5 Frequency in MHz: 3 or 6 decimal places Custom Frequencies Available with NRE Fee Similar Product in 5×7.5mm Package Click Here RECOMMENDED REFLOW SOLDERING PROFILE Frequency vs Temperature Ramp-Up 3°C/Sec Max. Critical Temperature Zone TEMPERATURE 260°C Ramp-Down 6°C/Sec. 217°C 200°C 150°C Preheat 180 Secs. Max. 90 Secs. Max. 8 Minutes Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Parameter C Conditions Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Vibration MIL-STD-883, Method 2007, Condition A Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Resistance to Soldering Heat MIL-STD-202, Method 210, Condition I or J Thermal Shock MIL-STD-883, Method 1011, Condition A Moisture Resistance MIL-STD-883, Method 1004 CRYSTEK C OR P OR A T IO N Rev: Y Date: 20-May-2020 Page 3 of 5 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt CCSO-914X-245.760 CCSO-914X3-433.920 C CRYSTEK C OR P OR A T IO N Rev: Y Date: 20-May-2020 Page 4 of 5 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com CCSO-914X True SineWave SAW Based Clock Oscillator 9×14mm SMD 3.3 & 5.0 Volt CCSO-914X-1000.000 CCSO-914X-1500.000 Crystek Corporation reserves the right to make changes to its products and/or information contained herein without notice. No liability is assumed as a result of its use or application. C CRYSTEK C OR P OR A T IO N Rev: Y Date: 20-May-2020 Page 5 of 5 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com