CSX2-AA-14-19.680

11.6X5.5 mm Ceramic SMD Crystal ee Fr ad HS t Le o an R pli m Co CSX4 Model Quartz Crystal TEMPERATURE Frequency Range: Calibration Tolerance: Frequency Stability: Temperature Range: Storage: Shunt Capacitance: Drive Level: Aging: ESR: 3.5MHz to 30MHz ±30ppm to ±100ppm ±30ppm to ±100ppm -40°C to 85°C -45°C to 125°C 7.0pF Max 100uW Typical, 300uW Max ±5ppm Max 1st/yr RECOMMENDED REFLOW SOLDERING PROFILE 260°C 217°C 200°C 150°C Ramp-Up 3°C/Sec Max. Critical Temperature Zone Ramp-Down 6°C/Sec. 3.5~4.0MHz= 200 Ohms Max 4.1~6.0MHz= 150 Ohms Max 6.1~10.0MHz= 100 Ohms Max 10.1~14.0MHz= 80 Ohms Max 14.1~30.0MHz= 50 Ohms Max 2K Tape and Reel Preheat 180 Secs. Max. 8 Minutes Max. 90 Secs. Max. 260°C for 10 Secs. Max. NOTE: Reflow Profile with 240°C peak also acceptable. Packaging: 0.357±0.008 (11.6±0.20) CRYSTEK 4.096M DC 0.126±0.02 0 (5.5±0.50) Suggested Pad Layout 0.200 (5.08) 0.090 (2.3) 0.079 (2.0) 0.098 (2.5) 0.090 (2.3) Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method 1014.10, Condition C 1014.10, Condition A2 1011.9, Condition A 1004.7 0.079 (2.0) 0.200 (5.08) 0.098 (2.50) 0.150 (3.80) 0.094 (2.4) 0.094 (2.4) 0.079 (2.0) Mechanical: Shock: Solderability: Vibration: Solvent Resistance: Resistance to Soldering Heat: Dimensions inches (mm) All dimensions are Max unless otherwise specified. ±5ppm max after 3 drops from 75cm onto hard wood board MIL-STD-883, Method 2003.7 ±5ppm max sine vibration 10-55Hz, sweep period 1-2 minutes, amplitude 1.5mm, 3 mutually perpendicular planes each 1 hour MIL-STD-202, Method 215 MIL-STD-202, Method 210, Condition I or J Build Your Own P/N CSX4-XX-XX-Freq Frequency Stability over Temp Range A B C D E G ±30 ppm ±50 ppm ±100 ppm ±50 ppm ±100 ppm ±100 ppm (-10 to 60°C)