CVCO45CL-0350-0460

CRYSTEK Voltage Controlled Oscillator-VCO M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION CVCO45CL-0350-0460 MIN TYP MAX UNITS 350 MHz 5.0 VDC Lower Frequency: Upper Frequency: 460 MHz Tuning Voltage: 0 Supply Voltage: 2.85 3.0 3.15 VDC 0 +3.0 +6.0 dBm Output Power: Supply Current: 15 nd mA Harmonic Suppression (2 Harmonic): -15 Pushing: 0.5 2.0 MHz/V Pulling, all Phases: 1.0 2.0 MHz pk-pk Tuning Sensitivity: dBc 10 MHz/V Phase Noise @ 10kHz offset: -112 dBc/Hz Phase Noise @ 100kHz offset: -134 dBc/Hz 50  Load Impedance: Input Capacitance: 100 pF Operating Temperature Range: -40 +85 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Product Control: Crystek Part Number: CVCO45CL-0350-0460 Release Date: 02-Nov-2016 Revision Level: J Responsible: C. Vales C CRYSTEK C OR P OR A T IO N Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 Phone: 239-561-3311 800-237-3061 Fax: 239-561-1025 www.crystek.com CRYSTEK Voltage Controlled Oscillator-VCO M ICROWAVE A Division of Crystek Corporation CVCO45CL-0350-0460 BOTTOM VIEW 0.354 (9.00) [Vt] SIDE VIEW [Vcc] Gold Finish 0.165 (4.20) Solder Mask Solder/Cover BOTTOM ORIENTATION MARK [GND] 0.066 (1.68) [RF] 0.033 (0.84) 0.185 (4.70) 6 5 4 TOP VIEW 0.500 (12.70) PAD LOCATION TOP VIEW 0.400 (10.16) 0.380 (9.65) CRYSTEK CVCO45CL 0350-0460 YYWW 0.062 SQ (1.52) SQ 1 2 Pad Connection 1 3 4 Others Vt Vcc RF-OUTPUT GROUND 3 0.354 (9.00) Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TOP ORIENTATION MARK TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.945±0.012 (24.00±0.30) 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO45CL-0350-0460 Release Date: 02-Nov-2016 Revision Level: J Responsible: C. Vales C CRYSTEK C OR P OR A T IO N Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 Phone: 239-561-3311 800-237-3061 Fax: 239-561-1025 www.crystek.com