CVCO55CL-0830-0970

M ICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS 830 MHz 4.5 VDC Lower Frequency: Upper Frequency: 970 Tuning Voltage: 0.5 MHz Supply Voltage: 4.75 5.0 5.25 VDC Output Power: +1.0 +4.0 +7.0 dBm 30 mA Supply Current: nd Harmonic Suppression (2 Harmonic): -15 Pushing: 1.0 2.0 MHz/V Pulling, all Phases: 1.0 2.0 MHz pk-pk Tuning Sensitivity: dBc 52 MHz/V Phase Noise @ 10kHz offset: -106 dBc/Hz Phase Noise @ 100kHz offset: -128 dBc/Hz Load Impedance: 50 Input Capacitance: 200 pF Operating Temperature Range: -40 +85 °C Storage Temperature Range: -45 +90 °C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M ICROWAVE A Division of Crystek Corporation SIDE VIEW BOTTOM VIEW Gold Finish 0.465 SQ (11.81 SQ) Solder Mask 0.220 (5.59) 0.030 (0.76) 0.100 (2.54) 0.415 13 0.315 14 0.215 15 0.115 16 0.380 12 11 10 9 0.000 1 0.000 TOP ORIENTATION MARK 8 0.405 7 0.305 6 0.205 5 0.105 Pad Connection 2 10 14 Others Vt RF-OUTPUT Vcc GROUND PAD LOCATION 2 3 4 0.415 CRYSTEK CVCO55CL 0830-0970 YYWW 0.500 (12.70) 0.500 0.280 0.500 (12.70) 0.180 TOP VIEW 0.215 0.040 (1.02) 0.115 [Vt] 0.080 0.052 (1.32) 0.315 [Vcc] Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches 0.500 [RF] TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) DIRECTION OF FEED 0.945±0.012 (24.00±0.30) 0.630±0.004 (16.00±0.10) Drawing not to scale Product Control: Crystek Part Number: CVCO55CL-0830-0970 Release Date: 11-Dec-2013 Revision Level: F Responsible: C. Vales CRYSTEK CORPORATION Specification is subject to change without notice Page 2 of 2 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com