CPPD-0.85-2

w ency eries Ne qu r S re plie F ti ul M Features: Input Drive Level: +10dBm to +20dBm Conversion Loss: 15dB typical Isolation (Fo, 3Fo, 4Fo): 33dB typical Small In-Line SMA Package Input Frequency Range 0.85 to 2.0 GHz Output Frequency Range 1.7 to 4.0 GHz CrysTeK PoCKeT Passive Doubler Part Number: CPPD-0.85-2 Input Freq. Range 0.85-2.0 GHz Actual Size Maximum Ratings: +27dBm Operating Temp.: -40°C to 85°C Storage Temp.: -55°C to 100°C Crystek’s new line of frequency doublers are designed in a rugged SMA housing. The CPPD-0.85-2 will accept an input frequency from 0.85 to 2.0 GHz and multiply by a factor of two to achieve output frequencies from 1.7 to 4.0 GHz. Designed for Test Equipment and General Lab Use. Rev.: A Date: 09-09-08 CrysTeK PoCKeT Passive Doubler Conversion Loss @ +11dBm Input Level 0 0 Conversion Loss @ +13dBm Input Level 5 5 10 10 15 15 15 13 15 Conversion Loss (dB) 20 18 17 Conversion Loss (dB) 14 18 20 25 23 25 30 30 35 35 40 35 30 45 45 50 1GHz 2GHz 3GHz Output Frequency 4GHz 5GHz 6GHz 40 40 45 1GHz 2GHz 3GHz Output Frequency 4GHz 5GHz 6GHz Conversion Loss @ +15dBm Input Level 0 0 Conversion Loss @ +17dBm Input Level 5 5 10 10 Conversion Loss (dB) 15 14 13 14 17 Conversion Loss (dB) 15 13 14 14 20 17 20 25 26 25 24 22 30 30 30 35 1GHz 2GHz 3GHz Output Frequency 4GHz 5GHz 6GHz 1GHz 2GHz 3GHz Output Frequency 4GHz 5GHz 6GHz Isolation vs. Input Level (+15dBm) 25 30 1.312 (33.34) 0.612 (15.54) Signal Out SMA Male 1GHz 2GHz 3GHz 4GHz 5GHz 6GHz 35 ISOLATION (dB) 40 1F0 45 3F0 ×2 Signal In SMA Female 0.435 (11.05) 50 55 60 Rev.: A Date: 09-09-08