CRBAMP-100-6000

ModEL: CRBAMP-100-6000 AMPLIFIER 100MHz to 6.0GHz Red ox B Crystek continues to enhance its product portfolio with the release of the Red ox Amplifier. Crystek’s model CRBAMP-100-6000 is a low-noise B general purpose connectorized amplifier covering a frequency range of 100MHz to 6GHz. The amplifier is housed in a custom aluminum enclosure (1.25” x 1.25” x 0.59”) with 3 SMA connectors for both input and output as well as the power supply input. The unit operates from a single +5V supply consuming only 60mA. This broadband, low-noise amplifier has a small signal gain of 18dB with an output power of 17dBm (P1dB). It features a typical noise figure of 3.5dB with an IP3 of +30dBm. Applications include IF or RF buffer amplifiers, base stations, high reliability applications and general lab use for in-house testing. Rev.: A Date: 05-19-08 ModEL: CRBAMP-100-6000 AMPLIFIER 100MHz to 6.0GHz Red ox B Electrical Characteristics TA=25 ° C, VCC=+5V, Z0=50 Ohms Frequency Range Gain Parameter Min. Typ. Max Units 100 18 17 3.5 5.0 60 22 30 6000 MHz dBm dBm 5.25 VDc mA dB dB dB Output Power P1dB Output IP3 Noise Figure Supply Voltage Operating Current Reverse Isolation Input VSWR Output VSWR 4.75 1.9:1 2.1:1 Absolute Maximum Rating Input Power Parameter Rating +5.5 +13 Units dBm VDc °C °C Power Supply Ambient Temperature Storage Temerature -40 to +85 -45 to +90 Rev.: A Date: 05-19-08 ModEL: CRBAMP-100-6000 Gain vs. Frequency 25 AMPLIFIER 100MHz to 6.0GHz 25 Red ox B Output P1dB vs. Frequency 20 15 16.5 17 16.5 15.5 15 14.5 14 10 5 20 19.1 Gain (dB) 15 19.6 18.7 17.7 Output P1dB (dBm) 16.6 15.4 13.2 10 5 0 100MHz 1GHz 2GHz 3GHz Frequency 4GHz 5GHz 6GHz 0 100MHz 1GHz 2GHz 3GHz Frequency 4GHz 5GHz 6GHz Reverse Isolation vs. Frequency 0 5 Reverse Isolation (dB) 10 Noise Figure (dB) 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 Noise Figure vs. Frequency 15 20 25 30 35 40 35 100MHz 1GHz 2GHz 3GHz Frequency 4GHz 5GHz 6GHz 22 23 22 23 22 23 3.5 3.1 3.1 3.2 0 500MHz 1GHz Frequency 2GHz 3GHz Output VSWR vs. Frequency 2.5 Input VSWR vs. Frequency 2.5 2 2.1 2.1 1.9 2 2 VSWR 1.5 1 1.2 VSWR 1.5 1.6 1.5 1.8 1.5 1.8 1.9 1 1.3 1.1 1.1 0.5 0.5 0 100MHz 1GHz 2GHz 3GHz Frequency 4GHz 5GHz 6GHz 0 100MHz 1GHz 2GHz 3GHz Frequency 4GHz 5GHz 6GHz Rev.: A Date: 05-19-08 ModEL: CRBAMP-100-6000 FRONT 1.250 (31.75) AMPLIFIER 100MHz to 6.0GHz Ø 0.118 Thru 2x (3.00) Red ox B SIDE 0.625 (15.88) 0.590 (14.99) CRYSTEK MICROWAVE IN 0.625 (15.88) G 18dB P1 OUT 17dBm CRBAMP-100-6000 AMPLIFIER +5V SMA X3 0.625 (15.88) BACK 1.000 (25.40) 1.250 (31.75) 1.000 (25.40) 0.250 (6.35) How to Order: PN: CRBAMP-100-6000 Red ox Amplifiers are available in-stock at our catalog distributor locations. B Crystek also offers a line of SMA cables. Ø 0.118 Thru 2x (3.00) Rev.: A Date: 05-19-08