CVCO33CL-0770-0870

M I C of Crystek Corporation ROWAVE A Division PERFORMANCE SPECIFICATION Lower Frequency: Upper Frequency: Tuning Voltage: Supply Voltage: Output Power: Supply Current: Harmonic Suppression (2 Harmonic): Pushing: Pulling, all Phases: Tuning Sensitivity: Phase Noise @ 10kHz offset: Phase Noise @ 100kHz offset: Load Impedance: Input Capacitance: Operating Temperature Range: Storage Temperature Range: -40 -45 nd MIN 870 0 4.75 +2.0 TYP MAX 770 10 UNITS MHz MHz VDC VDC dBm mA dBc MHz/V MHz pk-pk MHz/V dBc/Hz dBc/Hz pF °C °C 5.0 +3.5 6 -10 0.5 2.0 10 -108 -129 50 5.25 +5.0 12 -5 1.0 4.0 -104 -127 22 +85 +90 Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M I C of Crystek Corporation ROWAVE A Division Gold Finish BOTTOM VIEW [RF] Solder Mask 0.020 (0.508) SIDE VIEW 0.079 (2.00) 0.080 (2.04) 0.015 (0.381) 0.025 0.050 (0.635) (1.270) 0.030 (0.76) [Vcc] 0.015 (0.381) 0.030 (0.762) 0.060 (1.52) 0.120 0.180 8 [Vt] TOP VIEW 0.300 (7.62) BOTTOM ORIENTATION MARK 9 0.240 7 6 0.240 0.180 10 11 12 PAD LOCATION 0.240 0.180 0.120 Pad 1 8 11 Others Connection Vt RF-OUTPUT Vcc GROUND 5 4 CRYSTEK CVCO33CL 0770-0870 YYWW TOP ORIENTATION MARK 0.120 0.300 (7.62) 0 0 1 2 3 0.120 0.180 0.240 Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) 0.630±0.012 (16.00±0.30) DIRECTION OF FEED 0.472 (12.00) Drawing not to scale Product Control: Crystek Part Number: Revision Level: CVCO33CL-0770-0870 E Release Date: Responsible: 24-March-08 C. Vales Specification is subject to change without notice Page 2 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com