CVCO55CL-0211-0221

M I C of Crystek Corporation ROWAVE A Division PERFORMANCE SPECIFICATION Lower Frequency: Upper Frequency: Tuning Voltage: Supply Voltage: Output Power: Supply Current: Harmonic Suppression (2 Harmonic): Pushing: Pulling, all Phases: Tuning Sensitivity: Phase Noise @ 10kHz offset: Phase Noise @ 100kHz offset: Load Impedance: Input Capacitance: Operating Temperature Range: Storage Temperature Range: -40 -45 nd MIN 221 0.5 2.85 0 TYP MAX 211 4.5 UNITS MHz MHz VDC VDC dBm mA dBc MHz/V MHz pk-pk MHz/V dBc/Hz dBc/Hz pF °C °C 3.0 +2.5 7 -15 0.3 0.5 5 -115 -136 50 3.15 +5.0 10 -10 0.6 1.0 -110 -131 330 +85 +90 Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com M I C of Crystek Corporation ROWAVE A Division BOTTOM VIEW [RF] Gold Finish Solder Mask 0.030 (0.76) SIDE VIEW 0.465 SQ (11.81 SQ) [Vcc] 0.025 (0.64) [Vt] 0.040 (1.02) 0.080 0.180 0.280 0.380 TOP VIEW 0.500 (12.70) BOTTOM ORIENTATION MARK 0.150 (3.81) 0.052 (1.32) 0.100 (2.54) Pad 0.500 0.415 13 14 15 16 12 11 10 9 8 7 Connection Vt RF-OUTPUT Vcc GROUND 0.405 0.305 0.205 0.105 CRYSTEK CVCO55CL 0211-0221 YYWW 0.500 (12.70) 0.315 0.215 0.115 0.000 2 10 14 Others PAD LOCATION 6 5 1 2 3 4 0.000 0.115 0.215 0.315 0.415 TAPE AND REEL 0.059 Ø TYP (1.50 Ø) TYP 0.157±0.004 (4.00±0.10) 0.913±0.012 (24.00±0.30) DIRECTION OF FEED 0.630±0.004 (16.00±0.10) 0.500 TOP ORIENTATION MARK Unless otherwise specified, Dimensions are in: IN (mm) Pad Location Dimensions are in: Inches Drawing not to scale Product Control: Crystek Part Number: Revision Level: CVCO55CL-0211-0221 B Release Date: Responsible: 30-Jan-08 C. Vales Specification is subject to change without notice Page 2 of 2 CRYSTEK CORPORATION 12730 Commonwealth Drive • Fort Myers, Florida 33913 Phone: 239-561-3311 • 800-237-3061 Fax: 239-561-1025 • www.crystek.com