HRL12390W

Powered by HRL 12390W 6 12V 390W Specification Cells per unit Voltage per unit Capacity Weight Maximum Discharge Current Internal Resistance Operating Temperature Range HRL 12390W is specially designed for high efficient discharge application. Its characteristics are high energy density, small footprint and high discharge efficiency. It can be used for more than 260 cycles at 100% discharge in cycle service, up to 10 years in standby service. 12 o o 390W @ 15min-rate to 1.67V per cell @25 C(77 F) 97.5Ah @ 20hr-rate to 1.75V per cell @25 Approx.33 kg(72.75 lbs) 800A(5sec) Approx. 4 m Discharge: -15 ~50 ( 5 ~122 ) Charge: -15 ~40 ( 5 ~104 ) Storage: -15 ~40 ( 5 ~104 ) 25 C±3 C (77 F±5 F) o o o o (77 ) Nominal Operating Temperature Range Float Charging Voltage Recommended Maximum Charging Current Limit Equalization and Cycle Service Self Discharge 13.5 to 13.8 VDC/unit Average at 25 39A (77 ) 14.4 to 15.0 VDC/unit Average at 25 o o (77 ) CSB Batteries can be stored for more than 6 months at 25 C (77 F). Please charge batteries before using. For higher temperatures the time interval will be shorter. CSB-manufactured VRLA batteries are ULrecognized components under UL924 and UL1989. CSB is also certified by ISO 9001 and ISO 14001. Terminal Container Material I2-Thread lead alloy recessed terminal to accept M6 bolt Polypropylene(UL 94-V0/File E50955)*Flammability resistance of (UL 94-HB/File E216959) can be available upon request. Dimensions : Unit: mm (inch) Overall Height (H) 217.6±2.5 (8.57±0.1) Container height (h) 214.6±1 (8.45±0.1) Length (L) 342±2.5 (13.46±0.1) Width (W) 170±2 (6.69±0.08) Constant Current Discharge Characteristics Unit:A (25 ,77 ) F.V/Time 1.60V 1.67V 1.70V 1.75V 1.80V 1.85V F.V/Time 1.60V 1.67V 1.70V 1.75V 1.80V 1.85V 5MIN 443 398 376 336 295 254 5MIN 4,674 4,226 4,000 3,615 3,226 2,868 10MIN 308 285 274 254 232 210 10MIN 3,276 3,051 2,945 2,770 2,600 2,404 15MIN 236 223 215 203 187 171 15MIN 2,526 2,388 2,330 2,217 2,090 1,957 20MIN 191 182 177 167 154 141 20MIN 2,052 1,956 1,910 1,809 1,708 1,614 30MIN 142 134 130 122 114 105 30MIN 1,524 1,471 1,440 1,380 1,296 1,213 40MIN 112 108 105 99.3 92.2 85.8 40MIN 1,206 1,182 1,164 1,117 1,062 990 45MIN 102 97.1 94.6 90.8 83.8 78.2 45MIN 1,098 1,068 1,050 1,013 964 902 50MIN 93.5 88.8 86.4 82.2 76.4 71.6 50MIN 1,014 978 960 936 882 828 60MIN 78.8 75.1 72.2 69.2 64.7 60.7 ) 90MIN 58.0 54.1 51.4 49.1 45.6 43.4 90MIN 630 600 574 556 530 505 Constant Power Discharge Characteristics Unit:W (25 ,77 60MIN 858 820 804 776 746 708 RA0812 HRL 12390W 12V 390W 140 120 100 80 60 40 20 0.049 0.042 0.035 0.028 0.021 0.014 0.007 2.60 2.40 2.20 2.00 1.80 1.60 1.40 1PWx15Min 1PWx7.5Min )Ratio 0.025PA 0 3 6 9 12 15 18 140 120 100 80 60 40 20 0.049 0.042 0.035 0.028 0.021 0.014 0.007 2.60 2.40 68 2.20 2.00 1.80 1.60 14.70V 1.40 2.45V 0.025PA 1PWx15Min 1PWx7.5Min )Ratio 0 3 6 9 12 15 18 Charging Procedures Application Cycle Use Standby Charge Voltage(V/Cell) Temperature 25 (77 ) 25 (77 ) Set Point 2.45 2.275 Allowable Range 2.40~2.50 2.25~2.30 Max.Charge Current 0.1PA Final Discharge Voltage V/Cell Discharge Power(W) 1.75 0.1P>(W) 1.70 0.1P (W)