CT1008PS-152K

SMD Shielded Wire-wound Chip Inductors ctparts.com CT1008PS Series From 1.0 µH to 1000 µH Part Number CT1008PS_-102_ CT1008PS_-152_ CT1008PS_-182_ CT1008PS_-272_ CT1008PS_-392_ CT1008PS_-472_ CT1008PS_-562_ CT1008PS_-682_ CT1008PS_-103_ CT1008PS_-153_ CT1008PS_-223_ CT1008PS_-333_ CT1008PS_-393_ CT1008PS_-473_ CT1008PS_-683_ CT1008PS_-823_ CT1008PS_-104_ CT1008PS_-124_ CT1008PS_-154_ CT1008PS_-224_ CT1008PS_-334_ CT1008PS_-474_ CT1008PS_-564_ CT1008PS_-684_ CT1008PS_-824_ CT1008PS_-105_ Not shown at actual size. SPECIFICATIONS Please specify tolerance code when ordering. CT1008PS-102_ K = ±10%, M = ±20% CT1008PSF Please specify “F” for RoHS compliant *Inductance drop = 10% typ. at IDC L Test Freq. (kHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Q Fact. Min. 35 35 35 38 38 38 38 38 38 38 40 45 45 45 45 45 45 50 50 55 55 55 55 55 45 45 Q Test Freq. (MHz) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 SRF Typ. (MHz) 344 260 225 185 175 160 150 120 105 35 26 20 16 19 12 9.0 7.0 7.0 5.8 4.0 3.8 3.1 2.8 2.5 1.5 2.0 DCR Max. (Ω) 0.05 0.06 0.09 0.14 0.26 0.35 0.36 0.58 0.92 1.15 1.40 1.61 1.85 2.50 3.80 4.30 5.80 6.30 7.50 10.0 11.5 16.3 18.1 24.0 26.0 29.0 *IDC Max. (A) 3.0 2.8 2.1 1.3 1.2 1.0 1.0 .84 .78 .70 .65 .51 .45 .40 .31 .30 .30 .25 .22 .22 .20 .16 .13 .12 .10 .10 Inductance (µH) 1.0 1.5 1.8 2.7 3.9 4.7 5.6 6.8 10 15 22 33 39 47 68 82 100 120 150 220 330 470 560 680 820 1000 Compliant Available RoHS CHARACTERISTICS Description: SMD shielded wire-wound chip inductor Applications: LC resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, RF filters, disk drives and computer peripherals, audio and video equipment, TV, radio and telecommunication equipment Operating Temperature: -40°C to +85°C Inductance Tolerance: ±10%, ±20% Testing: Inductance and Q tested on an HP4285A at specified frequency. Packaging: Tape & Reel Miscellaneous: RoHS Compliant available. Marking: Parts are marked with inductance code Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PHYSICAL DIMENSIONS Size mm inches A Max. 3.81 0.15 B Max. 3.81 0.15 C Max. 2.74 0.11 D 1.78 0.07 E 2.54 0.10 F 2.11 0.08 G 0.51 0.02 PAD LAYOUT 04.05.05 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL