CT3061

CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Features • High isolation 5000 VRMS • Peak Breakdown Voltage
600V – CT3061,3062,3063
800V – CT3081,3082,3083 • Temperature range - 55 °C to 100 °C • Regulatory Approvals
UL - UL1577 (E364000)
VDE - EN60747-5-5(VDE0884-5)
CQC – GB4943.1, GB8898
IEC60065, IEC60950 Description The CT3061, CT3062, CT3063, CT3081, CT3082 and CT3083 series consists of a Zero Cross Photo Triac optically coupled to a gallium arsenide Infrared-emitting diode in a 6-lead DIP package with different lead forming options. Applications • Motor Controls • Lamp ballasts • Static AC Power Switch • Solenoid/ Valve Control Package Outline Schematic Note: Different lead forming options available. See package dimension. CT Micro Proprietary & Confidential Page 1 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Absolute Maximum Rating at 25oC Symbol Parameters Ratings Units 5000 VRMS VISO Isolation voltage TOPR Operating temperature -55 ~ +100 oC TSTG Storage temperature -55 ~ +150 oC TSOL Soldering temperature 260 oC Forward current 60 mA 1 A 6 V Notes Emitter IF IF(TRANS) Peak transient current (≤1µs P.W,300pps) VR Reverse voltage PD Power dissipation 100 mW Power dissipation 300 mW CT3061,3062,3063 600 V CT3081,3082,3083 800 V 1 A Detector PD VDRM ITSM Off-State Output Terminal Voltage Peak Repetitive Surge Current CT Micro Proprietary & Confidential Page 2 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Electrical Characteristics T A = 25°C (unless otherwise specified) Emitter Characteristics Symbol Parameters Test Conditions Min Typ Max Units VF Forward voltage IF=10mA - - 1.5 V IR Reverse Current VR = 6V - - 5 µA Input Capacitance f= 1MHz - 45 - pF Min Typ Max Units - - 500 nA - - 500 µA CIN Notes Detector Characteristics Symbol IDRM1 Parameters Peak Blocking CT3061,62,63 Current CT3081,82,83 Test Conditions IF= 0mA, VDRM= Rated VDRM Notes IF= Rated IFT, VDRM= Rated IDRM2 Inhibit Leakage Current VINH Inhibit Voltage IF= Rated IFT, - - 20 V VTM Peak On-State Voltage IF= Rated IFT, ITM= 100mA - - 3 V 1000 - - 600 - - Min Typ Max - - 15 - - 10 - - 5 - 380 - µA 1x1011 - - Ω - 0.25 - pF dv/dt VDRM Critical Rate of CT3061,62,63 Rise off-State CT3081,82,83 V/µs VPEAK= Rated VDRM Voltage Transfer Characteristics Symbol Parameters Input Test Conditions CT3061, CT3081 Units Notes Terminal Voltage = 3V IFT Trigger mA ITM=100mA Current IH CT3062, CT3082 CT3063, CT3083 Holding Current RIO Isolation Resistance VIO= 500VDC CIO Isolation Capacitance f= 1MHz CT Micro Proprietary & Confidential Page 3 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Typical Characteristic Curve CT Micro Proprietary & Confidential Page 4 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler CT Micro Proprietary & Confidential Page 5 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Package Dimension Dimensions in mm unless otherwise stated Standard DIP – Through Hole Wide Lead Forming – Through Hole (M Type) CT Micro Proprietary & Confidential Page 6 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Surface Mount Forming (S Type) Surface Mount Forming (Low Profile) (SL Type) CT Micro Proprietary & Confidential Page 7 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Recommended Solder Mask Dimensions in mm unless otherwise stated Marking Information CT 3061 VYWWK Note: CT 3061 : Denotes “CT Micro” : Part Number V Y WW K : VDE Option : Fiscal Year : Work Week : Manufacturing Code CT Micro Proprietary & Confidential Page 8 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Ordering Information CT306X(V)(Y)(Z)-G, CT308X(V)(Y)(Z)-G X = Part No.(X=1,2,3) V = VDE Option (V or None) Y = Lead form option (S, SL, M or none) Z = Tape and reel option (T1, T2 or none) G= Material option (G: Green, None: Non-green) Option Description Quantity None Standard 6 Pin Dip 50Units/Tube M Gullwing (400mil) Lead Forming 50Units/Tube S(T1) Surface Mount Lead Forming – With Option 1 Taping 1000 Units/Reel S(T2) Surface Mount Lead Forming – With Option 2 Taping 1000 Units/Reel SL(T1) Surface Mount (Low Profile) Lead Forming– With Option 1 Taping 1000 Units/Reel SL(T2) Surface Mount (Low Profile) Lead Forming – With Option 2 Taping 1000 Units/Reel CT Micro Proprietary & Confidential Page 9 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Carrier Tape Specifications Dimensions in mm unless otherwise stated Option S(T1) & SL(T1) Option S(T2) & SL(T2) CT Micro Proprietary & Confidential Page 10 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler Reflow Profile Profile Feature Pb-Free Assembly Profile Temperature Min. (Tsmin) 150°C Temperature Max. (Tsmax) 200°C Time (ts) from (Tsmin to Tsmax) 60-120 seconds Ramp-up Rate (tL to tP) 3°C/second max. Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / -5°C Time (tP) within 5°C of 260°C 30 seconds Ramp-down Rate (TP to TL) 6°C/second max Time 25°C to Peak Temperature 8 minutes max. CT Micro Proprietary & Confidential Page 11 Rev 1 Jul, 2014 CT3061, CT3062, CT3063 CT3081, CT3082, CT3083 600V/800V Zero Cross 6-Pin Phototriac Optocoupler DISCLAIMER CT MICRO RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. CT MICRO DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. ______________________________________________________________________________________ DISCOLORATION MIGHT OCCUR ON THE PACKAGE SURFACE AFTER SOLDERING, REFLOW OR LONG TERM USE. THIS DOES NOT IMPACT THE PRODUCT PERFORMANCE NOR THE PRODUCT RELIABILITY. CT MICRO ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT EXPRESS WRITTEN APPROVAL OF CT MICRO INTERNATIONAL CORPORATION. 1. Life support devices or systems are devices or 2. A critical component is any component of a life systems which, (a) are intended for surgical support device or system whose failure to perform implant into the body, or (b) support or sustain life, can be reasonably expected to cause the failure of or (c) whose failure to perform when properly used the life support device or system, or to affect its in accordance with instruction for use provided in safety or effectiveness. the labelling, can be reasonably expected to result in significant injury to the user. CT Micro Proprietary & Confidential Page 12 Rev 1 Jul, 2014