CTCDRH2D11-2R2N

Power Inductors - Shielded ctparts.com CTCDRH2D11 Series From 1.5 µH to 47 µH Part Number Not shown at actual size. SPECIFICATIONS Part are available in ±30% tolerance only CTCDRH2D11F Please specify “F” for RoHS Compliant Inductance (µH) 1.5 2.2 3.3 4.7 6.8 10 12 15 18 22 33 47 L Test Freq. (kHz) 100 100 100 100 100 100 100 100 100 100 100 100 DCR Max. (mΩ) 95 121 160 206 304 470 512 610 691 843 1460 2250 Saturation Current (A) 0.90 0.64 0.60 0.50 0.40 0.34 0.30 0.24 0.23 0.22 0.21 0.20 Temp. Rise Current Typ. (A) 1.45 1.27 1.02 0.88 0.80 0.60 0.50 0.48 0.46 0.43 0.32 0.30 CTCDRH2D11_-1R5N CTCDRH2D11_-2R2N CTCDRH2D11_-3R3N CTCDRH2D11_-4R7N CTCDRH2D11_-6R8N CTCDRH2D11_-100N CTCDRH2D11_-120N CTCDRH2D11_-150N CTCDRH2D11_-180N CTCDRH2D11_-220N CTCDRH2D11_-330N CTCDRH2D11_-470N Compliant Available RoHS PHYSICAL DIMENSIONS Size mm inches A Max. 3.2 0.126 B Max. 3.2 0.126 C 1.0 0.04 D 2.1 0.08 E 4.3 0.169 F Max. 1.3 0.051 CHARACTERISTICS Description: SMD (shielded) power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30°C to +100°C Saturation Current: The current when the inductance becomes 35% lower than its nominal value. (Ta=20°C) Temp. Rise Current (Typ.): The actual current when the temp. of coil becomes ∆T=40°C. (Ta=20°C) Inductance Tolerance: ±30% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code. Miscellaneous: RoHS Compliant available Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. B C A XXX D Marking: Inductance Code E F PAD LAYOUT Unit: mm 1. 3 1. 3 1. 3 1. 7 11.18.05 Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice CENTRAL